2 ай бұрын
2 ай бұрын
Пікірлер
@andrewmiller9207 Күн бұрын
Your adding another layer of plywood to the floor, how does the buildup terminate at the door?
@jeffreyslachetka4632 3 күн бұрын
Nice and clear!
@svenwalker5955 5 күн бұрын
Ugly. This is not how skilled tile installers make niches. A skilled tile setter uses mitres and epoxy. Schluter has nice products, but the niches are more suited for amateurs than pros. Top level tile nstallers can mitre everything. They don't use metal tracks, tile edge, or even jambs
@JP-Chess 5 күн бұрын
I’m using all set - mixing smaller batches - measuring out the powder by weight and adding recommended water ratio- this is for laying the tiles but it is coming out a little too thick - can you confirm the max water ratio per pound for wall tile
@schlutersystems1 3 күн бұрын
Hi there - I would suggest you give our Product Support team a call directly so they can troubleshoot with you based on your unique situation - 888-472-4588 (US) or 800-667-8746 (Canada). Thanks!
@tomcharters7051 7 күн бұрын
What about the tiled version which does not have a grate opening to hook?
@schlutersystems1 3 күн бұрын
Hi there! A supplied hook is used with the tiled version as well. You just catch it on the underside of the grate and pull it out.
@EvilEye1986 8 күн бұрын
Does this just move around freely then? Like when you step on it will it move it is it locked in somehow?
@schlutersystems1 6 күн бұрын
The grate does sort of snap into place, so it won't just move around freely. Hope that helps!
@EvilEye1986 6 күн бұрын
@ I see the little feet but there’s nothing for them to snap into. It looks like they just sit on the base. Can you add a dab of caulk to ensure it stays in place?
@schlutersystems1 3 күн бұрын
The grate shouldn't be moving.... if you need to put a dab of caulk on there, that won't hurt anything... but feel free to contact Customer Service as well, in case there is something missing. They can look at pics and verify for you. 888-472-4588 (US) or 800-667-8746 (Canada). Thanks!
@cazindominique 10 күн бұрын
Hi, can i use kerdi fix to bond kerdiband to kerdiboard ?
@schlutersystems1 9 күн бұрын
Hi there! KERDI-BAND needs to be installed over the KERDI-BOARD seems and fastener penetrations with an unmodified thin-set or Schluter ALL-SET. Hope this helps 🍊
@ahsfla 10 күн бұрын
Schluter is not only an excellent product but an excellent company. I am even more impressed with them after watching this incredibly well made and extremely helpful video. I am a contractor in Florida and I do my best to convince every single one of my remodel clients to consider using Schluter products when doing their project.
@schlutersystems1 10 күн бұрын
Hi there, thank you so much for the kind feedback, we certainly appreciate your support! 🍊
@ZomBeatBrainZ 11 күн бұрын
Holy crap the corners are expensive for what they do and how tiny they are.
@Aaron-eo1gv 11 күн бұрын
We have wooden subfloors, is it possible to use either of these?
@schlutersystems1 9 күн бұрын
Yes, you can use any DITRA-HEAT membrane on OSB or plywood subfloors. Just see our DITRA-HEAT Installation Handbook for complete installation instructions. Shower Handbook: sccpublic.s3-external-1.amazonaws.com/sys-master/images/h9d/h1e/9524653195294/Shower%20System%20Installation%20Handbook.pdf
@Aaron-eo1gv 6 күн бұрын
@@schlutersystems1 thanks for the info! maybe i am seeing it wrong, but i only see tiles on there, and not laminate floors. what goes inbetween the ditra and liminate?!
@schlutersystems1 2 күн бұрын
Detail DH-AFC and DHPS-AFC, currently on page 19 of the DITRA-HEAT Installation Handbook, states to use floor covering adhesive or foam underlayment, if required, per manufacturer, and a cementitious self-leveling underlayment, between the laminate and DITRA-HEAT membrane. Please give our Product Support team a call if you would like to discuss your particular project in more detail! 888-472-4588 (US) or 800-667-8746 (Canada).
@hollyc8356 13 күн бұрын
Is it paintable?
@schlutersystems1 10 күн бұрын
Hi there! We do not recommend painting our profiles, however this one is available in a few finishes! Please check out our product page for more information www.schluter.com/schluter-us/en_US/Profiles/For-Walls/Decorative/Schluter%C2%AE-DESIGNBASE-SL/p/DESIGNBASE_SLHope this helps! 🍊
@erickelly958 13 күн бұрын
What is the maximum spacing inbetween the heat wires ?
@schlutersystems1 13 күн бұрын
Hi Eric! You can install the DITRA-HEAT cable in a 3 studs spacing. You can also space them at continuously alternating 3 stud - 2 stud intervals in isolated areas or over the entire floor. Here is the installation handbooks for more details: chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/sccpublic.s3-external-1.amazonaws.com/sys-master/images/h78/he1/9553871699998/DITRA-HEAT%20Installation%20Handbook.pdf Hope that helps!
@ricardomundi16 14 күн бұрын
App is total garbage… can’t connect device
@LisaLubin 16 күн бұрын
Thank you for this. Can you wet shim the Kerdi shower pan to make floor more level? If not, and I have to use a self-leveler, can do use it after kerdi boards, kerdi curb, and a kerdi bench are already installed? Just where my shower pan will be?
@schlutersystems1 14 күн бұрын
Hi there! You would need to use a self-leveller to get the floor flat under the pan. It can be done after the KERDI-BOARD, KERDI-CURB, and KERDI-BENCH are installed. Hope this helps 🍊
@gunka13 17 күн бұрын
Hi looking through comments and on your site. You recommend lowering heat in between heating events. Do you have an ideal temperature? I live in upstate NY and during the winter we keep the house around 68-70 but want the floor in the bathroom to be warm in the morning and at night. If I want the floor to be 75 by a certain time how far in advance should I have it come on and what idling temperature during the day do you recommend? Thanks!
@schlutersystems1 14 күн бұрын
Hello there! Every floor is unique and the temperature and timing will depend on your specific installation, building and location. We recommend experimenting to find the ideal settings. You may want to start by increasing the temperature a few hours before you need it to reach the desired level, then adjust based on how quickly it responds. Hope this helps!
@dallashamlin5195 17 күн бұрын
What are the sizes of tiles and profiles used here?
@schlutersystems1 17 күн бұрын
Ouf, tough question, this is a bit of an older video, so don't have those details handy... were you looking for info on how to choose your profile size? Let us know how we can help.
@rogsolaris7411 17 күн бұрын
I am looking at installing a shower pan. And related subfloor or under layer prep products for that. Are these bases used primarily in preparation for installing a tile floor? Or for installing a shower pan? If I want to install a shower pan, would I use a product like this for the base underneath? Or are they two separate methods? (shower base + tile OR shower pan?)
@schlutersystems1 14 күн бұрын
Hi there, our shower trays are for tile installations and can go over typical substrates. The substrate must be clean, even, and load bearing. Any leveling must be done prior to shower tray installation. This would be used in conjunction with Kerdi on the wall, which is a waterproofing membrane. You are welcome to give our Product Support team a call if you'd like to discuss your project in a bit more detail! 888-472-4588
@MikeMJCW 17 күн бұрын
What is the approx height thinset adds to the standard (no heat) Ditra, 1/4"? So this then will eliminate the added height of thinset ?
@schlutersystems1 17 күн бұрын
The thin-set under normal DITRA is generally about 1/32" (max - 1/16"). Yes, the slight thin-set height would be eliminated.
@jeaniebroderick 18 күн бұрын
I can’t even get the screen to light up
@bandbsblastersandoutdoors2426 18 күн бұрын
Same
@schlutersystems1 17 күн бұрын
Please give our Product Support team a call, and they can help troubleshoot with you. 888-472-4588 (US) or 800-667-8746 (Canada). Thanks!
@schlutersystems1 17 күн бұрын
Please give our Product Support team a call, and they can help troubleshoot with you. 888-472-4588 (US) or 800-667-8746 (Canada).
@daviderquitt1642 21 күн бұрын
Yes it helped
@schlutersystems1 20 күн бұрын
Awesome!
@jotacalvo 21 күн бұрын
I’m confused as to why thin set was applied to every stud? By applying on the studs further out, isn’t the problem just being exacerbated? Any reason not to just apply to the recessed studs, using the true plane of the proud ones? 🤷♂️ In all honesty, this would apply so even more if the bowed studs were the ones that were proud. I surely wouldn’t want to add to the material.
@schlutersystems1 17 күн бұрын
You only need to put thin-set on the applicable studs. However, it can be helpful to put some thin-set on all of them, so you have somewhat of a cushion as you're pressing the board into place, rather than having to guess which ones need it and which don't and having to reapply multiple times. Hope that helps!
@jotacalvo 17 күн бұрын
@ it does. Thank you
@KevinGalley-j1k 21 күн бұрын
Are you able to use the schluter "all-set" mortor instead of unmodified for bonding kerdi band to the board?
@schlutersystems1 17 күн бұрын
Yes, you can use an unmodified thin-set or ALL-SET to bond KERDI-BAND over KERDI-BOARD.
@NaijaSavoryTrail 22 күн бұрын
Do you have a video of the curve project
@schlutersystems1 22 күн бұрын
Hi there! Unfortunately we do not have a video showing a curved profile. But would be good to reach out to your local Schluter rep. They might have worked on project with this type of application. If you are not sure who your rep is, please email us your city and zip/postal code at [email protected]
@cazindominique 23 күн бұрын
Hello, is it ok to use Primer-U for this PS membrane?
@schlutersystems1 23 күн бұрын
Hi there! Both PRIMER-U and PRIMER-PS work with PS membranes, but PRIMER-PS is the preferred choice. It not only dries faster but also forms a stronger, more durable bond with the membrane. Hope this helps 🍊
@joehennessy 19 күн бұрын
@schlutersystems1 - thanks for this, will check to see if a local distributor carries it as lowes only carries the primer-u currently it seems.
@cazindominique 17 күн бұрын
@@schlutersystems1 Thanks ! Just to say primer U was perfect for my project. PS membrane stick very well ! Very Strong bonding ! it's surprising !
@schlutersystems1 17 күн бұрын
Great to hear it! 🧡
@glideslope1582 24 күн бұрын
I have dashes next to my floor heat set point temp in manual and auto modes and no floor heat in ambient or floor modes with no fault codes. Would this indicate a thermostat failure?
@schlutersystems1 23 күн бұрын
Hi there🍊 Sorry to hear you are having a product issue - our Product Support team would be happy to help you - could you please reach out at 888-472-4588 (US) or 800-667-8746 (Canada). Thanks!
@DerianHdz 25 күн бұрын
Si le haces algunos cortes para el banquillo aun sigue con el desnivel?
@schlutersystems1 23 күн бұрын
¡Hola! No estoy seguro de entender la pregunta. ¿Podría explicármela?
@RommelMasse 25 күн бұрын
I had a system installed in early 2019. Worked well enough but today the screen on the thermostat is completely dark and it will not turn back on. What do I do?
@schlutersystems1 24 күн бұрын
Hi there🍊 Sorry to hear you are having a product issue - our Product Support team would be happy to help you - could you please reach out at 888-472-4588 (US) or 800-667-8746 (Canada). Thanks!
@bsfbestshortfilmsonyoutube 26 күн бұрын
QUESTION ? Can I use the same mortar to stick the coupling membrane down onto my concrete flooring to also place tiles on top ?
@schlutersystems1 24 күн бұрын
Hi there! Your concrete must first be even and free of bond breakers. PRIMER-U can be used over hard-to-bond-to substrates. Then you can use our ALL-SET thin-set or an unmodified thin-set to install the DITRA membrane and then install your tiles on top of it. Hope that helps!
@bsfbestshortfilmsonyoutube 26 күн бұрын
QUESTION ? i have an old concrete flooring and i'd like to know ? Can i use the same mortar I used to stick the coupling membrane onto the concrete to also place tiles on top ?
@schlutersystems1 24 күн бұрын
Hi there! Your concrete must first be even and free of bond breakers. PRIMER-U can be used over hard-to-bond-to substrates. Then you can use our ALL-SET thin-set or an unmodified thin-set to install the DITRA membrane and then install your tiles on top of it. Hope that helps!
@juancarlosnajerarico2226 26 күн бұрын
La ase mas recistente quebrarse o la ase nas recistente
@schlutersystems1 24 күн бұрын
La membrana de desolidarización DITRA evita que las baldosas y la lechada se agrieten al absorber el movimiento del subsuelo. Espero que esto responda a su pregunta.
@juancarlosnajerarico2226 26 күн бұрын
En que veneficia colocar la membrano a la baldosa o ceramica
@schlutersystems1 24 күн бұрын
La membrana de desolidarización DITRA evita que las baldosas y la lechada se agrieten al absorber el movimiento del subsuelo. Espero que esto responda a su pregunta.
@eltonnoway7864 26 күн бұрын
Per Schluter documentation, you can connect "multiple" heating cables to one thermostat "providing" the total load does not exceed 15A. So... two separate areas, each wired with DITRA-HEAT-E-HK heating cable... whose total "combined" amperage does not exceed 15A... can both be connected to a single thermostat - no Power Module required. Correct?
@schlutersystems1 24 күн бұрын
Hi there this is correct! The other option would be a PM. Hope this helps 🍊
@eddyflo2978 26 күн бұрын
Forgot the subfloor glue
@daniellanzotti2391 29 күн бұрын
So this can be applied directly to the subfloor without thinset?
@schlutersystems1 28 күн бұрын
Yes DITRA-PS can be installed directly to the substrate, but ensure the area is clear of debris for proper adhesion. PRIMER-PS can also be used to strengthen the bond 🍊
@nickbailey202 Ай бұрын
Will this material adhere to the tar residue left over from the tar felt paper on my subfloor? Would it help if I use the primer?
@schlutersystems1 29 күн бұрын
Hi there! If only the adhesive residue is remaining on the substrate, the DITRA-PS will work over it, as long as the PRIMER-PS is applied first. Hope this helps 🍊
@simaharpak3872 Ай бұрын
Why do you install walls first and then the floor? Isn’t better to install floor first?
@schlutersystems1 Ай бұрын
Hi there! You can do either or, as long as there is an overlap of 2'' at every seam and connection! It's really a matter of personal preference. Hope that helps!
@dominikknapik7990 Ай бұрын
What if its connected to a Bluetti power station via extension cable .Thanks
@dominikknapik7990 Ай бұрын
Is floating ground sufficient enough for this to work ?Thanks
@schlutersystems1 Ай бұрын
Hi Dominik! Bluetti power station via extension cable can be used if and only if the heating cable ground braid is grounded. Hope that helps!
@schlutersystems1 Ай бұрын
Hello! The floating ground can be used but we recommend that the installation be done according to the instructions given in the video.
@schlutersystems1 27 күн бұрын
Hi Dominik! I got more information back from our Technical department. There are different Bluetti power stations on the market. Not all Bluetti power stations have the same capacity. Make sure that it has the capacity to work with the floor warming application you are planning to do. In addition to that, it is very important to ground the thermostat on the Bluetti designed ground.
@margaretwigley7860 Ай бұрын
I live in a very low humidity area, how will I tell what is evaporation and what is a true leak?
@schlutersystems1 Ай бұрын
Hi Margaret! Good question. We recommend to do the water test for 24 hours. The water level shouldn't be noticeable with evaporation within that amount of time. Hope that helps!
@SeoExpertKabir Ай бұрын
Hi, I saw Your Content Quality is Very Appreciated, But videos Not Reach targeted audience Due to SEO Problems, So that video Views are Very Low. If You Want We Can Talk About the Right way to Reaching More audience & Views on your Videos . Can we Talk About the Organic Growth of Your KZbin Chanl??, I am Waiting for Your Response
@psbenipal7695 Ай бұрын
What kind of glue we can use to paste the sheet on wall ? Please share the glue name if possible
@schlutersystems1 Ай бұрын
Hi there! You can use our ALL-SET thin set to install the KERDI membrane over drywall, or any other unmodified thin set. Hope that helps!
@dianasong4594 Ай бұрын
Thank u so much
@leslietraywick9092 Ай бұрын
Ffs. The directions in the app do absolutely nothing. I hold the two buttons like it says and nothing happens. What a waste of money.
@schlutersystems1 Ай бұрын
Hi there! Sorry to hear you are having an issue with the thermostat. Our product support team would be happy to discuss this with you. Please give them a call and they can help take the next steps from there. 888-472-4588 (US) or 800-667-8746 (Canada).
@Александр-о1е7ъ Ай бұрын
здравствуйте, подскажите пожалуйста , обучаете ли вы людей этой профессии онлайн?
@schlutersystems1 Ай бұрын
Привет! Мы проводим онлайн-вебинары. Вот ссылка, по которой можно присоединиться: www.schluter.com/schluter-us/en_US/webinars
@Александр-о1е7ъ Ай бұрын
@@schlutersystems1 Почему-то при по попытке зайти по ссылке выдает 403
@schlutersystems1 Ай бұрын
привет! Некоторые сессии могут быть недоступны за пределами Северной Америки - где вы находитесь 🍊.
@Александр-о1е7ъ Ай бұрын
@@schlutersystems1 Россия
@schlutersystems1 Ай бұрын
Привет! Вы всегда можете заглянуть на наш канал KZbin, где вы найдете отличные видео и инструкции. www.youtube.com/@schlutersystems1
@anthonyhernandez9500 Ай бұрын
do kerdi corners have a spec placement. Should the corner come before or after bands or does it matterat all.
@schlutersystems1 Ай бұрын
Hi Anthony! There is no specific order. You can install the corners and then the band, or vice versa. As long as there is a 2'' overlap at every seam, we are good with it! Hope that helps!
@nickbailey202 Ай бұрын
Is this commercially available now? I cannot find it. If not, can I use the ditra heat ps instead?
@schlutersystems1 Ай бұрын
Hi Nick! Yes, DITRA-PS is now available! You can use the link below to find your local Authorized Schluter dealer. There’s also DITRA-HEAT-PS, but keep in mind the thickness difference: DITRA-PS is 1/8'' thick, while DITRA-HEAT-PS is 1/4''. Since DITRA-PS has just launched, it may take some time for dealers to have it in stock, so be sure to contact your local dealer for availability. www.schluter.com/schluter-us/en_US/store-finder. Hope this helps 🍊
@nickbailey202 Ай бұрын
I can't find this product online or on your website. I do find the ditra heat version with the round areas to receive the wire, but not the rolls of decoupling membrane with the square grids. Has this been released yet?
@schlutersystems1 Ай бұрын
Hi Nick, here’s the link to the DITRA-PS product page: www.schluter.ca/schluter-ca/en_CA/ditra-ps-primer-ps The product has just launched and is currently rolling out across North America. Be sure to contact your local dealer to check on stock. Hope this helps🍊
@julieroloff2982 Ай бұрын
Why? Is dis so stopid
@ionionescu1331 Ай бұрын
Can you have the kerdi distra extend under the bathtub and follow the rest of the install procedure? Or it’s not consider best practice?
@schlutersystems1 Ай бұрын
Hi there! If you plan to tile under the regular tub, you could use the DITRA under it. If you are doing a free standing tub and want to waterproof where the pipes penetrate the membrane, you should contact customer service to inquire about how to proceed. You can reach them at 888-472-4588 (US) or 800-667-8746 (CA). Hope that helps!