Hello Ahad Baig, The references you give in this video are absolutely wrong. There are other videos similar to yours that also contain erroneous data. You did not visit any Wadi Sal, what you visited was the Wadi Qada'ah, a tributary of the Wadi Al Bih. After traveling 8 km along the dirt track that follows the course of the Wadi Qada'ah, and before reaching the village of Dhanab, you took a detour to the right and went up the dirt track that goes to the village of Silay Al Khatami, which is at the top of the mountain. Currently, vehicle passage through that last stretch of dirt track is reserved exclusively for residents of that village. Please, I would appreciate it if you would review this data, and correct the title and references of your video, since it confuses those who see it, and is contributing to the spread of erroneous data. If you need more details, I can gladly provide them. Thank you so much
@mazyounibussiness3513 ай бұрын
brother can i contact you i'm Abu Dhabi
@ahadbaig84953 ай бұрын
+971562473210 you can WhatsApp me
@konstantinnn4 ай бұрын
Hey , so my LCI headlights have been blacked out (from previous owner) and for the most part I like the look but the eyebrow that sits on top is also blacked out unlike your video and I really dont like that , any tips how I can return it to normal?
@ahadbaig84954 ай бұрын
You could use like a like acetone or paint stripper Dont use paint thinner that can react poorly with the plastic
@konstantinnn4 ай бұрын
@@ahadbaig8495 Okay thanks , will try it.
@jorgeteran34748 ай бұрын
Do you have any experience in changing out the Halos with like 3/4 dtm rings for the LCI models? Theyre more common to do on the Pre LCI, rarely see them on the LCI models.
@BarelyLegacy_Legacy Жыл бұрын
Looks great! Now how did you do the roof and pillars? Since there’s no roof rails you need to make it “seamless”.
@AOE5578 Жыл бұрын
I think you broken 2 plastic clibs by pulling the front grill like this ,Because there are 2 more clibs down right and left,, that 2 clibs you can insert screwdriver (-) and rotate 1/4 time the clips till it match the square openings then you can pullout that grill , now you need to get new ones , thanks for the video
@gerdirectx7419 Жыл бұрын
Just as a tip, they sell Y9 type H4 proyectors, they are plug and play, dont really need any special installation. You just put them like a normal bulb. and they give the same result but way less complicated
@ahadbaig8495 Жыл бұрын
But they look kinda goofy as its super tiny, and performance is no where near the same, especially with width
@alexjim335 Жыл бұрын
Hi! Do you know if the eyelid has only one led? Or the are many leds cause I see you removed a cable in the middle of the eyelid, thx!
@reneperez4555 Жыл бұрын
Where you bought it?
@BVonBuescher Жыл бұрын
Whats up with the music dude?
@myloalex Жыл бұрын
What bulbs does the projector has?
@ahadbaig8495 Жыл бұрын
This is using an H1 bulb. But i would recommend going with a projector that uses a D2S Bulb l
@myloalex Жыл бұрын
Do you know if there are some that use H4 bulbs?
@myloalex Жыл бұрын
Very well documented. I might give it a shot
@jamesbelk8033 Жыл бұрын
Where can I get a new back housing?
@ahadbaig8495 Жыл бұрын
I get it locally from auto parts stores, DEPO and Casp make them
@wonderboykun Жыл бұрын
With these Bi-LED projectors, since they have fans, do you seal the stock dust caps so dirt and water won't enter the headlight or you just leave it open for ventilation? Thanks.
@ahadbaig8495 Жыл бұрын
Sealed on the back, i now use a 3in pvc pipe cap with a gromet, housing has its own ventilation ports from factory
@yeahnoway111 Жыл бұрын
Isnt a laser literally burning eyes
@mussambogella5259 Жыл бұрын
Hi..can you help me get these lights all done and ready to fit in my patrol 2005 model y61? How much?
@ahadbaig8495 Жыл бұрын
Shoot me a message on Whatsapp +971562473210
@Rose-lq1qj Жыл бұрын
can you open the same lci lens without cutting them or its screwed inside?? i need help pls, thanks
@triple.x Жыл бұрын
Good job bro 🙏 Greeting from Indonesian
@reddragon37872 жыл бұрын
Booooo
@suleiman0012 жыл бұрын
Hi baig, do you by any chance have the part number of the factory headlight same as the one in this video ? Much appreciated
@ahadbaig84952 жыл бұрын
Hello, i just got it from the accessories shops locally, DEPO and CASP are the different manufacturers for them
@evln542 жыл бұрын
Do you think you can show a video of the headlights on , I was wondering how the lights look on at day/night to see if they are bright enough or not so I can buy aftermarket rings , this video was more than a year ago so who knows if you’ll see this comment but I’d appreciate it a lot man thanks in advance
@yaerd61632 жыл бұрын
What HID ballast did you use? And any links to where I can source it from
@rays.nine22 жыл бұрын
Sick I've been wanting to do this 🔥🔥🔥🔥🔥
@MrT1N1T12 жыл бұрын
I want two complete candles, ready, how much does it cost, and do you ship to Saudi Arabia?
@ahadbaig8495 Жыл бұрын
WhatsApp me +971562473210
@Shyamiiii2 жыл бұрын
Thats badass! So im confused. Is it low beam, high beam, laser beam, or is the laser beam active when you high beam?
@ahadbaig84952 жыл бұрын
Laser is hi beam
@christiaancronje80902 жыл бұрын
Am I mistaken or is that lights very blue?
@ahadbaig84952 жыл бұрын
camera color correction
@marphotography48352 жыл бұрын
Great drive
@idrismohammadzai46492 жыл бұрын
How did you paint it ?
@ahadbaig84952 жыл бұрын
High temp black spray paint
@dmakhkamov2 жыл бұрын
Eeeeey, its abu dhabi car)
@hasankhalid12042 жыл бұрын
No shipping to Saudi Arabia ☹️☹️
@ahadbaig84952 жыл бұрын
Message me on Instagram i have many customers in saudi, @971retrofits
@ahmedalawadi28482 жыл бұрын
Hey bro hope you’re doing fine Bro I live in AD and just got me a 2019 vtc super Safari . If you can do the same job for me can u with ur profit
@ahadbaig84952 жыл бұрын
Ive been doing these for a while Check out my Instagram @971retrofits it has all my designs
@grantlong65862 жыл бұрын
Can you do the syringe method instead of cutting them?
@eyadsarhan9262 жыл бұрын
i feel it poor led for low beam but i like your way for fix it as professional
@ahadbaig84952 жыл бұрын
Its. Honestly hard to judge on camera Settings change in different scenarios Either way 100000times better than stock
@eissaa76663 жыл бұрын
How much is it? (Parts and installation) .
@ahadbaig84953 жыл бұрын
Whatsapp me 0562473210
@murielurgelles9831 Жыл бұрын
@@ahadbaig8495 hi, do you ship here in the philippines?
@ahadbaig8495 Жыл бұрын
@@murielurgelles9831 yes
@kyenanallen55013 жыл бұрын
Can you get the links to what was used cheers
@ahadbaig84953 жыл бұрын
Its all generic components just look up HID retrofit
@supra8003 жыл бұрын
If you post the links for the items you bought will be greatfuly.
@ahadbaig84953 жыл бұрын
Just search the names up on aliexpress, the links constantly change, from price changes
@jravila46093 жыл бұрын
What headlights are those ??
@ahadbaig84953 жыл бұрын
Custom made them myself, legacygt.com has a ton of info on how to do it
@jravila46093 жыл бұрын
@@ahadbaig8495 bet, thanks bro !
@priyannaran87723 жыл бұрын
how much for this ?
@ahadbaig84953 жыл бұрын
Around 3500 AED
@info90283 жыл бұрын
nice job how much approx thank you
@ahadbaig84953 жыл бұрын
With new headlights Total cost was around 4000AED
@amjathkhan20043 жыл бұрын
Hey, thanks for the nice tutorial. The Aliexpress link isn't working. Also, can you please tell me where you bought the nut and bolts from? Thank you!
@ahadbaig84953 жыл бұрын
Projector retrofit hardware kit on ebay/aliexpress
@marcoordonez20793 жыл бұрын
Good job..bro....how long did it take u ..t do the job....got a couple of clients who wants t upgrade their. Car....from halogen t laser
@ahadbaig84953 жыл бұрын
About 2 full days to assemble Another day to test and align
@Madmax-bw6gb3 жыл бұрын
What size projector did you use? 2.5” or 3”?
@ahadbaig84953 жыл бұрын
3in
@Madmax-bw6gb3 жыл бұрын
@@ahadbaig8495 did you have to do much cutting?
@ahadbaig84953 жыл бұрын
@@Madmax-bw6gb not at all that Projector has a threaded shaft so all you have to do is slide it into the bulb hole and use the h4 adapter to secure it
@Madmax-bw6gb3 жыл бұрын
@@ahadbaig8495 cool, have you done any retrofits on the series 3 Gu patrols? They have a slightly different headlight style.
@ahadbaig84953 жыл бұрын
@@Madmax-bw6gb sadly no not yet, check out my insta 971retrofits, it shows all the different ones ive done
@jayyoo12293 жыл бұрын
I actually didnt know your allowed to have different colored headlight in uae
@ahadbaig84953 жыл бұрын
Youre not, thats just a secondary led used for "show" the actual headlights are still yellow/white
@en-oi4lg3 жыл бұрын
hi, do you know if there is a lever for switching the lens for driving on different sides of the road? like from UK (left side of the road) to normal right side of the road. thanks
@matt.108 Жыл бұрын
Ha. The projector beam is specific for what region the vehicle was manufactured from.
@dimuthuwijethunga41083 жыл бұрын
Are you selling those headlights ..?
@ahadbaig84953 жыл бұрын
Yea i sell them pretty often My insta is 971Retrofits
@dimuthuwijethunga41083 жыл бұрын
@@ahadbaig8495 Thanks.. I'll Check
@sesshoumarunagyur3 жыл бұрын
I'm planning my 08' GT to wrapping too! it's helped a lot! bw that color is nice! 👌 Let me know pls how the vinyl is after 2yrs? thanks!
@ahadbaig84953 жыл бұрын
Car has long been sold, if done right u wont have issues, i sold it a year ago and it looked great
@sesshoumarunagyur3 жыл бұрын
@@ahadbaig8495 thank you! nice to hear that! I would to keep the new style at least 2-3 yrs.
@ahadbaig84953 жыл бұрын
@@sesshoumarunagyur maintain it well by keeping it clean, ive even use a DA to polish it, dont slack off on the edges always wrap around My vid isn't the best and definitely learned alot since then, if ur worried about a section get a piece of scrap and test it to see how ud go about
@ahadbaig84953 жыл бұрын
@@sesshoumarunagyur rear bumper definitely should do inlay around trunk Front bumper the whole inner bit at the bottom should be its own piece and Inner corner of headlights Other than that its a super easy car to wrap
@ahadbaig84953 жыл бұрын
@@sesshoumarunagyur use masking tape to protect adjacent. Panels, and avoid cutting on the body just scoring the vinyl and tearing it is usually enough
@t.a.o.m3 жыл бұрын
😍
@JunaidJabir3 жыл бұрын
One of the only videos I found that go into such detail. Well done, subbed!
@nickmavraganis91073 жыл бұрын
Do u know if the halo ring bulb is replaceable I know the pre lci uses h8 but I can’t figure out with the lci
@ahadbaig84953 жыл бұрын
Yea you can either replace the bulb that lights it up with a white led Or there are tons of kits on ebay that sells complete light up led halos, on prelci the best way to do it is completely remove the low beam one and mount new one to the cover of the projector And just paint the hibeam halo and mount new on top of that using fishing wire and double sided tape Pre lci lights are waaaaay easier to open , 230F at 10 mins in an oven is enough to open the lens
@ahadbaig84953 жыл бұрын
Bavgruppe has good write ups on how to wire it and stuff
@AmaanKhan-cu4qy Жыл бұрын
@@ahadbaig8495hi mate, is it possible to replace the halo ring on the lci with an led ring and if so any advice on how to do it)
@Gogetitbandit10 ай бұрын
Can you show me where the angle eye bulb is located so I can replace it? There’s no videos online that specifically tells you how to change lci angel eye bulbs
@havhout37073 жыл бұрын
Hi. I didnt see the little 2 high beam light to the wall.
@ahadbaig84953 жыл бұрын
16:41 you can see it on the wall
@havhout37073 жыл бұрын
Look like LED high beam are so dim light which Cant notice in this video.
@ahadbaig84953 жыл бұрын
@@havhout3707 it's hard to convey on video , especially in a lit up city, ther pictures in the end show the difference, look at the yellow building on the right