@@geppettocollodi8945 Ciao Geppetto non è per nessuna pistola, solo una sfida che ho voluto vincere da tempo con me stesso, si possono fare rigature di qualsiasi passo e su diametri da 14 mm in su, sotto è difficile per la costruzione del porta utensile che diventa laboriosa e micrometrica..si possono fare anche ragnature per lubrificante come quelle che si vedono sulle bussole delle macchine utensili. Ciao, Alberto

You obviously haven’t tried to make an ECM machine without a lathe…

Hi and thanks for your comment, maybe an oversight, therere few commercial parts, other are parte made by myself !! Cheers form Italy, Alberto.

@@rockybalboa879 Thanks a bunch for your comment!

@@villy8778 Hi, i did it by nyself and you have too, because nobody sell it: you can find the drawings on internet, simply write " Harold Hall" on Google! In the "HH" site you will find the drawings for free, It is easy to make it! Cheers, Alberto 🇮🇹

@@lucasandri5462 Ciao Luca e grazie del tuo messaggio : la mia rettifica aveva il tavolo porta mandrino nelle foto, ma furbescamente il venditore non me l'ha spedito..in Italia i venditori di macchine utensili usate onesti sono come mosche bianche... provare x credere! non trovando un blocco cosi alto di acciaio oppure di alluminio, ho ripiegato per questa idea! Problemi di rigidezza non c'è ne sono, asportero 0.01-0.02 mm al colpo, non è una fresa! La colonna è quasi al limite inferiore, mancano 15 mm, questo xchè poteva essere usata anche come affilatrice! Infatti ho un mandrino porta frese inclinabile con divisore in dotazione, più avanti lo provo! ciao e alla prossima!! Alberto 🇮🇹

@@ab-shop ah ok grazie mille per le delucidazioni. La preoccupazione sulla rigidezza non era tanto per le asportazioni quanto per la possibilità di avere una superficie "vibrata" dopo la lavorazione.

@@andrewdolinskiatcarpathian Ciao dear Andrew and I am always super happy to hear from you: actually in the photos via internet, the magnetic spindle support table was there, when it arrived at my house, lying on its side, without a truck with a hydraulic tail lift etc... and in addition I hurt myself, I preferred not to ask the seller anything (he was lucky to not be there with me..), also because he had already done too many things! (now I'm fine luckily, someone looked down that day..) So I started thinking about how to make a riser plane and the solution you saw is a compromise because I did not find a single block of aluminum or steel so thick; obviously several problems arose during construction, that's why I also had to build other pieces that would help me get to the end!! Now I'm starting the electrical part with inverter!! I hope to see you soon!! Thank you very much Andrew and have a good weekend!! Alberto 🇮🇹

Thanks Rusty:yes I need some setup to arrive at the end, as always surprises during video making!! Ciao from Italy, Alberto

Yes correct, i'm using it like a surface grinder but in any case i have also the suppport to grind drill-bit, end mills etc, i have only to move the table! Thanks a bunch for your comment, a big Ciao from Italy! Alberto

Ciao Silvano, ho preso un 125 x 250 (mm) su Aliexpress, solo perchè era disponibile la spedizione dalla Germania altrimenti avrei rinunciato per le spese di spedizione, pesa un botto.Il tuo errore era davvero piccolo io non sono riuscito a far meglio dei 0.05 mm, appena collego inverter (prossimo video) provo a rettificare il piano magnetico vediamo cosa ne esce!! Grazie per il tuo commento !! Ciao alla prossima, Alberto.

Hi Matt, yes correct: a little expensive, the possibility to go up near the stone was steel (I should become old with my mill at 0.25 mm every pass..), a single block of aluminium ( I did not find it, maybe only for company and not for private like me) or 2 plates of aluminium (150 mm x 30 mm x 300 mm), so this one was the chance; the most easy you think the most difficult will be to do, of course to make the 4 columns at same length.(+/-0.02 mm)! Every time a challenge, fun every time: this is the fuel of my channel. Happy you like my table and yes, I have to stay on my workshop a little more.. to clean the mountain of chips too!! Ciao Matt, Alberto.

Hey Tom Ciao !! How is life treating you ?? Happy to know that you liked the project, always a challange until the end but this is the fuel of channel! I did this solution because i cannot find a giant block of aluminum and steel too much time !! A big ciao from Italy, Alberto

@@RCAFpolarexpress Ciao David how goes it in Canada?🤓 Thanks a bunch, It Is the table that the grinder's seller promised me but he does not sent to me with the machine, and i did It by my self on my idea and drawings! Cheers!! Alberto 🇮🇹

Thanks a bunch:i'm happy that you liked my tips to solve common problems, that happen when you have to work on a milling machine!! Cheers, Alberto

@@lloyd4768 yeah, It was installed when the grinder arrived, It was used for end mill : the first test i will make with a standard grinding stone! Thanks for your comment, Alberto

@@hulksmash6476 Yes correct, because i don't have a press! So i tried another way to arrive at the same result, using a mix of ideas, 3D print parts and lathe parts.

@ab-shop clock you bar (dti) in chuck and push through using tailstock with ejector pins of increasing lengths. It would be really cool to see you build a jig and maybe even put hydraulic cylinder, bolt to floor? I am no professional gunsmith dude, I did mechanical engineering but in injection moulding industry. Keep on keeping on 😉

@@hulksmash6476 Thanks for your comment, i will think about It, every new idea can be a new challenge and a new video!! A big ciao from Italy, Alberto 🇮🇹

@@uedilasantos215 Ciao Uedila, you have to use stainless steel and to set different areas of the drawing with different powers and velocity, this create different colours on steel! Hope to answer your question!! Have a nice day, Alberto 🇮🇹

@@ab-shop thanks

@@uedilasantos215 You are welcome!

@@wellingtonrodrigues6659 Thanks for your kind message, happy you liked it! Alberto

Yes it was of pigeon shit MIG quality lol

@@aryanmarne1464 Hi Aryan, the part 2 Is on my AB-SHOP channel page, you can scroll down my videos and you will find out the part 2. ATB, Alberto

Thanks Can I get the Drawing of the parts which you have made with megerments

@@Renova-tec Gracias Paolo, +1 suscrito por ti también! 😜

Hi first, second it is a homemade depth caliper, easy to make and very useful.

@@agentcovert Thanks for your comment, i put 4 points of the lathe ( One Is the Dahlander motor) to the earth, from 2017 when i installed the VFD, no problems.( 7 years until now)

Grazie Silvano troppo gentile!! Adesso in teoria è in discesa, sto già lavorando sul disegno di una tavola di rialzo su cui montare il piano magnetico, vediamo cosa riesco a partorire :) Ciao a presto, Alberto.

@@giovannimarchesin4166 Ciao caro Giovanni!! è stato un momento fantastico e siete stati super bravi, ninno tri ninno 😘👏😘👏 Senza di voi il nulla!! Prox macchinario mi sa sarà un mezzo per lasciare casa.... perché mi mette fuori 😂😂😂 Cmq grazie non si sa mai, magari una cosa più piccola 😂 A presto caro Giovanni vi voglio tanto bene!!!! 💞💞💞 Alberto

@@AlbertoPelucco No ma piacciono molto,si vede di? 🤟😂

@@TheRecreationalMachinist Thanks Matt, you know It stays on the floor for 2 months because I had an accident on my arm, during the unloading process from the pallet...by hand! Now i stay better and, as you can see, i'm lucky to have this friends that help me! The inverter Is arrived Yesterday so i start of course the new video 💪🤓

@@andrewdolinskiatcarpathian Ciao Andrew, happy to hear from you: yes I'm fine but my strong friends said I had to stay still and that they would do everything! That's why I did something but not a lot during the lift! The weight is not 400 kg but around 300 kg as per the manual I found on the internet, still a good weight! I was very worried about the wheels, if they didn't hold up I had done everything for nothing and I would have to call my friends a second time! Oh yes, the wife came down to see if anyone was hurt, (🤭) luckily everything was fine 💪😂 You can see it from the expression on my wife's face, right? 😂 Now the path is downhill, I'm already working on the riser table for the magnetic table and on the inverter, because the motor is 380 volts 3 phas es! Ciao Andrew see you soon!! Alberto 🤓🇮🇹

@@billhowcroft5751 Mi fa piacere, la stessa cosa succede per inglese, molte parole tecniche le imparo anch'io da altri KZbinr!! Ciao!! (P.S: Ciao è italiano, ma da tempo ormai è diventato internazionale 🤭🇮🇹)

@@KF-qj2rn i missed an s !!🤭

@@simonesalamon4388 grazie Simone, orgoglioso ti sia piaciuto!!! 💪🤭

Yes really, it was on the floor from May because I injured my right arm, in that time i made drawings for the wheels and finally wit friends the machine lift up !!

@@ninomaiorano6697 Una s può scappare!:) in questo primo video della rettifica era importante riuscire a metterla in posizione verticale e, visto il mio piccolo garage, che le ruote funzionassero per poterla spostare! È andato tutto bene 😉

You know when you have a small garage like mine...every centimeter is important, so the idea was use it and after i move it to another place! Thanks and Cheers, Alberto :)

Molto fiero che ti sia piaciuto !!! :)

@@TheAyrCaveShopCiao Dean thank you: i study something until waiting My Friends...have you seen what wonderful friends i have too? 😍💪

@@ab-shop Yes nice to have a good crew. Although you probably had to feed them 🙂

@@TheAyrCaveShop In the near future a pizza of course 🤓

Grazie Antonio! Mi fa molto piacere il tuo commento!!

Thanks a lot, happy that you like My channel and my videos, new video Is under making and It will come out soon! Alberto 🤓🇮🇹

Not all Italians, only the italians like me that did not speak a good English 😂🇮🇹

@@ab-shop you speak very good English. I understand everything 🙌🏽

@@AlabamaTree Thanks a bunch, you are super kind 😀

Ciao non possiedo più quel tornio, come vedi da qualche anno ho un Colchester Bantam! Il diametro era da 125 mm! Gli avevo fatto un attacco rapido con dei perni, a sgancio rapido!

@@ab-shop grazie

@@arg-maker-garage Figurati 😀