how to do alt delete without the keyboard like in android??
@LuckykyunArt7 күн бұрын
I haven't use android but this is how I resolve that question. "alt delete" is just an opposite of deletion hence the "ALT"ernate DELete, so basically, it's just a fill tool targeting the entire canvas ignoring anything in the layer. There might be no way to do that but just to manually huge brush the entire selection or just use fill tool and UNCHECK the "Apply to connected pixels only". That's the only thing I can help.
@chadesu78376 күн бұрын
@@LuckykyunArt thank you so much I'll try that!!!
@chadesu78376 күн бұрын
OW BY THE WAY I ALSO DISCOVERED HOW TO MANUALLY DO IT!!!
@Astriodia220 күн бұрын
ayyy thx m8
@urmoonlitup24 күн бұрын
May I know what size is that tablet? Small, medium, or large?
@LuckykyunArt22 күн бұрын
That's the small one.
@brianhini7671Ай бұрын
you save me man i love you
@MyChemicalLove011Ай бұрын
So so informational, thank you so much!! I never could figure out what this effect was called. Ima try it on this poster I’m making, thanks again! ❤
@richidaalterego2694Ай бұрын
This is awesome
@KTHurtАй бұрын
thank youuu this was really helpful!! ♥
@jilliusАй бұрын
great video. what arm are you using for your screen tablet ?
@LuckykyunArtАй бұрын
I am not quite sure since I don't have it now. It's actually for the laptop stand. It's some kind of a generic product you can buy online.
@neroarchangel2 ай бұрын
Didn't help at all, made it even slower..
@fatemehsharifi6432 ай бұрын
Thank you SO much. I really had to know how to do that in Clip Studio beside from auto actions. This REALLY helped tysm♡
@astrezirkel3 ай бұрын
dude this was so helpful!
@chrisberry24724 ай бұрын
Thanks, super helpful.
@matthewprisco68494 ай бұрын
This was a great video, extremely helpful learning the difference masking types with this program. I've used this program for years and only recently decided to learn more tools so thank you
@valentinechoco58844 ай бұрын
thanks for the tutorial !
@sandermarkunzo45385 ай бұрын
Can you tell me how to get 2.0 csp?
@LuckykyunArt5 ай бұрын
It's either you have to purchase it or subscribe on their update pass.
@sandermarkunzo45385 ай бұрын
@@LuckykyunArt Subscribe their update pass? How?
@ms78335 ай бұрын
Most stuff doesn't work like you show buddy. Thanks!
@thunkules5 ай бұрын
Gets right to the point, gets the job done. It was very helpful, thank you very much!
@wibly78315 ай бұрын
just what I needed, thanks!
@lorensano6 ай бұрын
paano po sya chinacharge, pwede po ba gamitin yung wall charger?
@LuckykyunArt6 ай бұрын
usb type-c siya so pwede lang yung sa phone. pero if naka connect sa pc, kusa na mag cha-charge so bihira lang to i-charge.
@lorensano6 ай бұрын
thank u po
@murasakiss6 ай бұрын
Thanks❤
@eyenmaiden58856 ай бұрын
THANJ YOUU THIS IS VERY HELPFULL
@Tita_Daisy6 ай бұрын
Nice tutorial and thanks for sharing
@racuntiara26_6 ай бұрын
Ugee s640 vs deco mini 7 which is better
@LuckykyunArt6 ай бұрын
by paper, they are the same. quality wise and durability, something I haven't tried on Ugee.
@maxlee84726 ай бұрын
Thanks for teaching! It’s amazing!
@UltimatePerfection6 ай бұрын
I actually love Hard Light blending mode. It combines multiply with color dodge, any color above 0.5 value (upper half of the square color selector) will act as light, anything lower than that will act as shadow.
@deepuman71517 ай бұрын
is there a way to apply this technique in photoshop
@LuckykyunArt7 ай бұрын
I never found this in photoshop, sadly. I only use the Clip Masking method when I do this.
@deepuman71517 ай бұрын
@@LuckykyunArt Thank you for letting me know though.
@jakesonkaze7 ай бұрын
Thanks for this tutorial master
@alastrionaseger85717 ай бұрын
This was a really straight forward and helpful video. And though I've used layer modes before, your video made understanding them much easier. Thanks!
@Oyasumi__zz7 ай бұрын
AWESOMEEE!!! THANKSS!!!!!!
@TheJollifyz7 ай бұрын
thank you so much! i've been struggled with this issue for years and this is the only method that works! it's so helpful
@one_lazy_robot8 ай бұрын
Now THIS is something helpful, this is gonna be fun to mess around with, thanks for the tutorial you made.
@aiiro24948 ай бұрын
Do you recommend it? I want a small size for the phone and it will last more than two years.
@LuckykyunArt8 ай бұрын
I do. But not sure how long it would last if you're using it everyday. That depends on how you hold and use it but for me, it could last more than that.
@aiiro24948 ай бұрын
@LuckykyunArt I'm sorry, but, What about Huion H420X with phone? the working area is it like the mouse or it's working on the full area?
@markpartist8 ай бұрын
Thank you so much!!!
@princehalemcorpin77769 ай бұрын
Wow! This is really cool! Would love to see more! <3
@1BigSpec9 ай бұрын
I paint miniature models and this is very useful in understanding where to place the highlights in long flowing hair.
@DarkKnux099 ай бұрын
Sir, you just saved me months of headaches figuring out whats causing my brush lag. From what I saw, this has been an ongoing issue with the program for a few years. Thank you so much for making this video!! It was very helpful 😁
@LuckykyunArt9 ай бұрын
glad this helps that much. I've been seeing a lot of post relating to this issue and hope they can find this too.
@gregm29979 ай бұрын
'PromoSM' 👀
@LuckykyunArt9 ай бұрын
I did my best to hide everything. I dunno what you found. xD
@MrsRimavelle9 ай бұрын
I can't believe it's actually a video that gets to the point, solves the issue and even had time to give you a nice tip in a minute.
@parthdubey_1510.10 ай бұрын
very informative, would like to see more complex objects
@mysterycroman11 ай бұрын
Good job
@iancres-deantan692411 ай бұрын
basketan sa sirao?
@LuckykyunArt11 ай бұрын
yizz
@xanderyusuf749411 ай бұрын
Honestly I started get confused at clip to layer below because of your accent? Not really sure though for some reason 🥹 I know it's not your fault,and a lot of thing we're really helpful
@LuckykyunArt11 ай бұрын
probably that, or maybe needed more refined explanation for it. Maybe I explained it too fast to keep the time short.
@xanderyusuf749411 ай бұрын
@LuckykyunArt all and all, it's been really helpful, will check the few topics I didn't understand somewhere else, I doubt I'd find anything better than yours though, your explanation of the types of layers and how they work is the best I've ever seen
@enricohepner11 ай бұрын
I'm gonna try this now. If it won't work, I will come to your house with a pineapple pizza 😤 this is not a threat, this is a promise (If it will work, I will be happy to refer to you if someone ever asks me about colouring in CPS. Either way, thanks for the tutorial.)
@LuckykyunArt11 ай бұрын
well. i think i win either way. sorry, but im into pineapple pizza.
@enricohepner11 ай бұрын
@@LuckykyunArt good for you, haha. It worked though, so thank you :)
@edithenonbinarysquirrel Жыл бұрын
I bought one and the Power key is missing..😮😮
@OriGummie Жыл бұрын
So I think I've damaged the layer on my Line Art layer, so when I click on that layer to be visible I see patches of white paper "underneath". What do I do? How do I restore the tiling on that layer?
@MLCArt-ce8rf Жыл бұрын
How do you merge the layers on a blending mode? Because I use control E and then it cancels the blending mode effect on the layer.
@LuckykyunArt Жыл бұрын
not sure what you meant. Most of the time, it will cancel the blending modes when you merge it into other layers and it will turn it back to Normal unless both layers have the same blending modes. But if you mean like, the effect of the Multiply will be applied after merging, then select all the layers you want to merge and then right-click and "Merge Selected Layers" As for me, I think I customized the shortcut into Ctrl + Shift + E. But if that doesn't work, try putting them in one Group Folder and Merging them.
@MLCArt-ce8rf Жыл бұрын
@@LuckykyunArt Oh okay thanks!Yeah I was having a hard time with merging the multiply,glow and light effects to the raster layers. but I will try that.
@shh7600 Жыл бұрын
Was trying to learn how to fix one problem, end up fixing more than three...this was very helpful, thank you!!!
@LuckykyunArt Жыл бұрын
that's great to hear! if you don't mind sharing, what are those problems you're trying to figure out?
@shh7600 Жыл бұрын
@@LuckykyunArt Thank you! I didn't know layer mask is this powerful, your video showed me the wonders of it :))) I knew nothing about layer mask lol I was shocked we could edit it 5:47. The parts where you explained how to use layer mask really helped me with effects I couldn't achieve with transparent lock and clip to layer below (I only knew these two ways). I was trying to paint someone in water and wanted there to be bubbles surrounding my character but didn't want to erase the part where it overlaps (so I tried the thing you did at 5:16), it also helped me with coloring things seperatly. The shadow masking saved so much time, I could simply just erase the highlights!
@PositiveImpaq Жыл бұрын
hahaa, 711 omlette dami nang problema ng pilipinas dumadagdag kapa haha. Thanks sa tips sir Lucky heheh
@marwanbassem5954 Жыл бұрын
4:28
@lowwwery Жыл бұрын
Your layer explanation art is the CTV logo. This is very good!