I forgot what motor do you replace the stock motor with? Thanks Bob
@HobbyconceptsLLCСағат бұрын
Usually 55 turns.
@stevescott365710 сағат бұрын
Can I glue parts together even though I painted the parts? I bought the baier sfc1 bundle. Should it have the rumble motor and weight?
@HobbyconceptsLLC5 сағат бұрын
Generally glue interferes with plastic cement. Use E6000 on painted parts or similar (or screw them together). The Beier SFR-1 does not have vibration motor capability by itself. You could add a small speed control to work a vibration unit but I personally do not like vibration. They shake the trucks apart.
@OscarRoa-qe1bh14 сағат бұрын
Do you sell them?
@HobbyconceptsLLC13 сағат бұрын
Links in video description.
@Cliffdodger15 сағат бұрын
The worst part of the build is the body!
@DonaldSmith-b8u19 сағат бұрын
Well done as always. This might be my next truck build after I finish the FH16 wrecker. Still a ways to go on that one.
@KevinMallonee23 сағат бұрын
Sir it is not a tank. It's an Infantry fighting vehicle that carries infantry soldiers
@erikdelangКүн бұрын
You’re are a true magician
@erikdelangКүн бұрын
I don’t know what to say I’m flabbergasted
@christopherrapley6432Күн бұрын
0:30thank you bob i finally finished my winter build
@RobertVanderschansКүн бұрын
I'm attempting to program the same truck . Can you program all the light functions the same way you programed the steering and speed. Thank you for any help.
@michaelrajca6043Күн бұрын
bob, i will order the sfr-1 starter kit for my grand hauler from you in a couple weeks. i know it comes with lights that have resistors. i have some lights that do not. im thinking of also getting the akl-8-w ribbon cab le. does it matter if i run some of your lights thru it that already have a resistor with some that do not. will it harm it at all?
@HobbyconceptsLLCКүн бұрын
You can mix them just fine. The only thing that is important is that each LED needs a resistor. If you put one that has a resistor into an AKL-8 you can just jump the resistor slot with apiece of wire.
@user-yr2jq2np5s2 күн бұрын
Can you extend this by using the grand hauler chassis rails or will the body and panels not work/ need a lot of holes drilled?
@HobbyconceptsLLCКүн бұрын
You would need to drill a bunch of holes.
@RCXploits2 күн бұрын
The headache rack on the real truck looks more like the lesu rack.
@tomrowley17172 күн бұрын
Cool
@paulclifford40893 күн бұрын
Hi there are you going to finish the globe liner you started months ago I would love to see you finish it
@HobbyconceptsLLC3 күн бұрын
Yes, video coming soon!
@michaelrajca60433 күн бұрын
bob, the more videos i watch, the moe questions i have. what is the difference between the sfr-1 and msm-1 other than 1 has an esc and the other 1 doesnt. it seems like the sfr-1 would work better or me because the computer programming looks very easy to do
@HobbyconceptsLLC3 күн бұрын
The SFR-1 is really a great unit. I like it as it has the speed control built in which makes installation easier. You don't need to run separate power wires etc.
@frkop3 күн бұрын
when come next part?
@HobbyconceptsLLC3 күн бұрын
In a week.
@michaelrajca60433 күн бұрын
bill, you were correct about the use of the gt power kit to use on my grand haulor and i returned it. thats what you get for trying to save a few bucks. i plan to get the mfc-01 unit. do you know if i can use a radiomaster mt12 pistol grip radio to run it. the rx and radio have plenty of channels.
@HobbyconceptsLLC3 күн бұрын
You can use any radio with the SFR-1. If it has SBUS it is very easy. Read the manual online to see if has SBUS. If it does not then choose something else. Also your avatar is the eFlite Viper Jet. Love mine!!
@michaelrajca60433 күн бұрын
@@HobbyconceptsLLC thank you bill. that is my backround. if you want to know anything about air rc, im your guy but ive gotten the itch for surface vehicles and have a couple of crawlers and road vehicles to start ny collection. the tamiya semis just intrigued me and wnated to build 1 because thats half of the fun, and i love their detail. i got a radiomaster mt12 radio because i just wanted 1 radio to use for all my vehicles like my spektrum ix20 flies all of my planes. im just ads about that and its a pet peave of mine lol. thats why im asking about using that radio. it does suport sbus but i know nothing about sbus. yes i am used to an air radio and can make it do whatever i want but the mt12 is a very versatile radio that uses edge tx and elrs and can be programmed to do infinite things. its just a higher learning curve than im used to. thats why i ask about that radio. i understand its kind of a newer radio so if you ever make a video on using that radio to control trucks id be all in. until then i think il reserve myself to running my truck the normal way with servos and an esc and have no lights or sound yet. until a video like that comes out by anyone and learn more ill just use it like that but its almost done and ive watched many of your videos for guidence and thank you for that. i try to use your site for certain parts and stuff as much as i can. thanks again and if you need help with rc planes or edf jets just shout me out. im not a video kind of guy but fly for fun mostly cuz that whats it all about.
@michaelrajca60433 күн бұрын
@@HobbyconceptsLLC bob sorry to b0ther you again but when you mentioned sfr-1 and i watched your 3 pt videos you peaked my interest. my question to you is do they have a gear shifting sound i can assign to the 3 pos switch my transmission is on? do they have a hitch and unhitch sound i can assign to the two position switch i have assigned to the 5th wheel and lastly do you carry an on off switch that is a slider button type of switch with a small faceplate i could place inside the steps of the grand hauler in place of the control board but everything sounds very good just by watching those videos and made me interested in you starter pkg and the akl-8-w connector because im not much of a solderer lol. the computer part sounds pretty straightforward. oh and lastly would tthere be a way to use the tamiya vibration unit or would i lose that
@JakeRobeson-h1l4 күн бұрын
Can i use the SFR-1 sound teacher system with a USM-RC-3 module?
@HobbyconceptsLLC3 күн бұрын
The USM is basically just the SFR-1 without the speed control.
@JakeRobeson-h1l3 күн бұрын
@@HobbyconceptsLLC Ok, I am new to the Beier system. i noticed that on the SFR-1 system the S-BUS is attached to prop #6 and on the USM it is prop channel #8. Will that make my USM have SBUS at prop #6 or is there a way to switch that prop ?
@al3xuk4 күн бұрын
How can you upload from a truck, if the PC does not have card reader slots.
@HobbyconceptsLLC4 күн бұрын
You only need a USB slot. If you do need to upload you can get a card adapter like this: www.amazon.com/Reader-Adapter-Camera-Memory-Wansurs/dp/B0B9QZ4W4Y/ref=sr_1_3?crid=2VORITU88G80B&dib=eyJ2IjoiMSJ9.OP-goGzbVTBErEAb5KAgGPaK3y1KpKlwUa4P6clW3yo1aG2DiNLK9t2OgB3XmNzre-K4Kq6qWMHo9cPgMIw5azZw5WjOw_BdwOMjDy3d1-xj_ZEm0EGqA1qvfoo44Xw2K5A4hw28Jju6XHhyhX-AmctgfdnjL9TaGTYSuTWF7UDkmcxAYD35PZi6WxUkmcabtrtJg9YI8-2QwbnLxYTtsbeLWQ_2EOf4NwAn5ip-ecU.t9Skx7tpFbVhUH0l5c8UII2dlc_oJyGP9akcHz7JmwM&dib_tag=se&keywords=usb+to+sd&qid=1720283157&sprefix=usb+to+s%2Caps%2C148&sr=8-3
@al3xuk3 күн бұрын
@@HobbyconceptsLLC Thank you
@alanmaynard78425 күн бұрын
Hi Bob. Could you tell me the correct email to get you on. I have tried to email you, but think I may be using the wrong address. Alan
I purchased your radio for mine put I can’t get the gears to work don’t know what I’m doing wrong
@HobbyconceptsLLC5 күн бұрын
You can email me if you need help.
@pisflap15 күн бұрын
Hi Bob, could I ask using the beier system do you put resistors on each led?
@HobbyconceptsLLC5 күн бұрын
You cab put the resistor anywhere in line with the LED. The ones I sell have it right next to the LED but it can bae anywhere in the wiring depending on if you have fit issues. I normally use 680 ohm LED's.
@marcopaganoni28935 күн бұрын
everyone, is it my impression or has Tamiya been coming out with new truck kits in recent years but are the cabines used always the same? what do you say?
@sebastianRC-Mania5 күн бұрын
one of my favorite mediums ❤😊
@AnthonyWiddowson5 күн бұрын
Think I would have attached the axle to the springs, then mount the rear springs on the chassis for ease of access.🤔 Amazing build of this truck.
@DPWian5 күн бұрын
Too bad it isn’t a 6x4 Volvo.
@RcNeil5 күн бұрын
these are popular here in UK I this same exact one on the motorway single rear axle fh16 in the blue with silver decals and it looks stunning
@DPWian5 күн бұрын
@@RcNeil yea but still would be cool seeing two rear axles like a 6x2/2 with a pusher/tag axle.
@RcNeil5 күн бұрын
@@DPWian I think licensing is the issue am dying for them to come out with a new US truck ages now so I companies don’t want to give them license for them to do a model. Scania and Mercedes are big in the rc industry here in uk hence is easy for them to get licenses form these companies hence why we have so many of these models
@DPWian5 күн бұрын
@@RcNeil yeah that is unfortunate and some new US trucks would be cool.
@lars-uweschubert8985 күн бұрын
🤩 great job 👏👍💪🚚
@scottvanbuskirk36535 күн бұрын
That's what I do is a silver or gold base coat, I use dupli color automotive paint, a lot of GM colors or Ford colors
@michaelcopse20135 күн бұрын
Another great video Bob the painting looks amazing...
@joselitominiaturasdeonibus5 күн бұрын
Good Bob,🤣🤣🤣👍
@RcNeil5 күн бұрын
I literally was wondering if bob has build his Volvo as I really want to get one myself my first single rear axle 🎉
@DrDiff9525 күн бұрын
Glad you are using SFR-1. Just ordered aluminum plate for my globe liner
@naharkin92636 күн бұрын
Hi Bob, thanks for all these videos, they have been very helpful! I bought my first 2 kits of USM-RC-3 after watching your tutorials. Im not using Beier's esc controller as Ive my trucks equipped with the Hobbywing quicrun fusion pro. So far everything has been working great, except for one major issue, I dont know how to set my reverse lights and sounds after 2 backwards stick movement such as the Tamiya's MFC... I need the breaks of the quicrun but If move the stick back the motor breaks, but the Beier think Im already reversing.. How can I fix that?
@HobbyconceptsLLC5 күн бұрын
Actually have no looked into that. I am not sure you can do it.
@naharkin92635 күн бұрын
@@HobbyconceptsLLC Ohh thats too bad
@user-ts9oi5ts2j6 күн бұрын
Hello Bob, please tell me how to install the ST8 transmitter on Tamiya MFC-03. I recently purchased it and am using it, but I have a problem turning on the light and I don't know what to do.
@HobbyconceptsLLC5 күн бұрын
You need to set "conditions" in the menu. Word they use for dual rates. You can verify you have it set in the monitor - should go from 75% to 100% on channel 2&4. Use switch A for conditions.
@TheBaconKing326 күн бұрын
Do you think it is possible to remove the spring from the other axis on that stick to make both not recenter?
@HobbyconceptsLLC5 күн бұрын
If you remove the spring the channel won't re-center. Can't imagine why you would want to do that though...
@kretosik19026 күн бұрын
i bulid new:)
@MasterVhemert6 күн бұрын
how do i let the boom off the tow truck working on a beier set?
Don't know. Ask on the Flysky PL18EV Facebook group.
@hfuffvnjvnijd89897 күн бұрын
i canged my original receiver to a flysky receiver.. soundbox does not play the sunds anymore, only hiss sound.
@davidedds69357 күн бұрын
Can it do dual receivers AND dual models at the same time? Like say a truck and wireless trailer with seperate paired 6 channel receivers, then flip a switch and change to a different model like a dozer or excavator on the lowboy?
@HobbyconceptsLLC5 күн бұрын
I am sure you can. Certainly you can flip a switch to change models.
@yamenlasyho97187 күн бұрын
Planning to buy a grand hauler and founding your channel is the best thing ever with all your tutorials and builds into super helpful to watch before I begin my build. I do have a question as I want to carve out a space at home to put it and really ask a favor of you, could you kindly measure the grand hauler with a trailer can be either a container or fuel tank type and give me the dimensions of length width and height of both hauler and trailer. Want to build a case for it first, much appreciated!
@HobbyconceptsLLC5 күн бұрын
I don't have any trailers here to measure. Get on the Tamiya Truck Open Studio Facebook group and ask there. You will get the answers!
@benner-iw8rx7 күн бұрын
Just got my trailer in the mail today! Bob, do you know what the voltage is for the lift motor ??
@HobbyconceptsLLC5 күн бұрын
Battey voltage (7.4 volts)
@jocelynservigne16648 күн бұрын
magnifique ....
@justmanningrc74428 күн бұрын
Hi bob i have emailed you about a copy of your wiring diagram for the mfc-01
@marcopaganoni28939 күн бұрын
everyone, is it my impression or has Tamiya been coming out with new truck kits in recent years but are the cabines used always the same? what do you say?
@HobbyconceptsLLC8 күн бұрын
Sorry, what is a canine?
@marcopaganoni28938 күн бұрын
Cabines
@rcmigschannel9 күн бұрын
Hello Bob👋🏼. Can the msm-1 soundmodul be controlled with a pistol grip remote, preferably the flysky gt5 ? Thanks.
@DinarQ889 күн бұрын
Thanks for the explanation. I was lost in the composition
@shanerountree362310 күн бұрын
Hi Bob, so glad you are doing these videos as it makes figuring things out much easier. Just got done with the initial install on my Globeliner and have been playing around with just the speed control and sounds so far, and these have cleared up some confusion on what I was doing wrong (kept having the horn sound when I shifted the transmission, drove me nuts) The other questions I have now is if you can 'set' the parking brake so you have to release it to start driving (similar to the engine startup, which I want to do separately, i.e. start the engine but not 'put it in gear' until the brake is released) It may not be possible and that's OK, as this thing has a ton of other features I'm looking forward to learning about. Keep up these awesome videos, and I'm looking forward to the lighting ones next for both the truck and trailer (my trailer lights are on the way...)