@@NerdyBassHead that's the Shredder basket by Incriminator audio

@@kyleraynor8406 yes it was it was around 650$ after tax but to be honest I would have rather got a custom box for the trunk the measurements were off from the website but since I couldn't find any local box builders and nobody who builds boxes finance I had no choice but to go with this one for the time being it's the only pre-fab I can find anywhere on the market with a triple baffle and double sided all the rest and for the sub I'm running I need it

@@kevinAuman1 it's got to weigh at least 125lb it was an act of Congress for me to get it mounted in the box but it slams I'm working on getting the money together for a second one now going to put two of them on a good 12-15k and hopefully it will be loud enough for me lol I'm newer to the competitive audio scene just joined a Team trying to get as loud as possible

@@natesomers5387 right now I'm running a single 15" Incriminator audio TYRANT rated for 5K RMS on a cab45 but I'm getting a second cab-45 to put on it for the time being and ordering another Tyrant next year probably going to do a 6th order when I get the second one I just joined team Bass Outlaws so I'm getting a box built to drop to the trunk class until I can get the other sub

@@shawncozad8565 I don't know bro I'm not experienced enough but he definitely was slamming he had it set up right really windy blow through

Because they in phase. The same way two speakers any where don't unless one is 180° out of phase.

@shawncozad8565- If the woofers were almost touching each other, face to face, then that would be a restriction. But having the woofers face each other, with about equal distance apart, as there cone area, actually allows the woofers to boundary load off of each other= can be beneficial. How beneficial, depends on enclosure size, power, and the woofers themselves= Testing/trials and errors. Also it is important to have a wider gap between the woofers, @ the Port exit, kind of like a horn effect. Hope this helps!?

@@MoToArchY I'm actually from middle TN I just drove there for the show but I just joined Team Bass Outlaws (TBO) yesterday morning so I will definitely be making as many shows as possible

@@PShizzzle he's gettin down bro awesome demo

@@808patanderson I am bro I have done a bunch of changes since the video and show I will be posting an update in a few hours I got the basshead garage wattage meter I'm going to install and do some testing with it against the DMM and clamp meter and see where I'm at

@@SlamryCamry19 I just got my watt meter in the mail yesterday will be installing soon too

@@PShizzzle I had a blast FR FR

@@808patanderson you knocked my head off bro killer build I can't wait to get my AAK back in the build you can feel the power 💪💪

@@audiokonnections I'm sorry bro I didn't know what vehicle you was in your close to me I have a feeling we will run into each other a lot

@@SlamryCamry19 most definitely

@@audiokonnections are you going to either of the shows this weekend bass wars is having one in KY and there's another on the state line for TN and AL I just read about them this morning the one in KY is starting at 4p.m. and going to be a night show with l.e.d contest and the cyclone 🌀 and what type of car you got your setup in bro so I can look for you at the next show

@@Gomez561 it's massive bro I had to build a platform for it in the rear seat area and has a triple baffle and double sided all the rest it gets down 4 a pre-fab

I'll be there bro I can't wait

@@rmcarter79 that's a good idea bro

@@allenscott5773 it slams bro for a pre-fab it's doing excellent eventually going to put a 6th order in the rear seat area and get a second Tyrant 15

@SlamryCamry19 man..2 of em..won't be able to sit in there..hell dat one along hits real hard

Hey Derrick, just realized we chatted before on KZbin about you getting the Tyrant. Keep up the good work with the install 💪🏼

@@Gomez561 it's a monster bro I love it already making plans to order a second one and build a 6th order for next year to compete with a nice Incriminator amp to go with it I'm hooked on the incriminator audio I've never owned a sub this powerful

@@SlamryCamry19 happy for you bro! Your car is going to need some steel reinforcements haha! One of those (let alone two) is going to cause some damage 😱

@@Gomez561 I know lol I love it

@@allenscott5773 I love it it's an absolute beast I have a brand new Deafbonce AAK 6k that I was planning on putting on it but something happened with my LOC and it blew and took the AAK 6k with it and fried my LF Audio HPVM I ordered a cab-45 V2 got it last Friday trying to break it in now before the XS power show Saturday going to be my first time ever attending a show I just have it in a pre-fab right now the down 4 sound HD3 single 15 enclosure with the triple baffle and double sided all the rest 4.5 cubic feet it slams in the pre-fab I can only imagine what it can do in a proper enclosure and high powered amp I'm running it at 15.8 so it should be seeing over 5k at full tilt I haven't went past half way with the gain so far and I'm super impressed with it already saving for a second one I want to do a 6th order in my rear seat area

@SlamryCamry19 man..I have never been to a show.. I wanna order that prefab box but I think imma go custom..wenever u can upload a video of it..I wanna see how urs do in that box..it can handle over 5k..I have tho 1 ohm version and it's at half ohm..my box is too big so I can't turn it up all the way..2 of them u say..man I can't wait to see that..pressure but that 6th order gonna bring the pain..subscribe vote won

@@allenscott5773 thanks for the sub 🙏 I'm trying to build the channel and I have taken the next two days off work to get ready for the show I'm still learning myself but trying to get it looking and sounding the best I can but I will be posting videos of it tomorrow while I'm working on everything I need to get at least 6 hours of break in time tomorrow so I can actually turn it up at the show

@SlamryCamry19 ok then..and yes sir..I haven't seen anyone running those subs but me and u..Have fun at the show. I'm still learning myself..ur channel will grow..just have faith and post as often as u can

What’s this sub look like compared to a Zv6 size wise?

@@FatMat916 there coming bro I had a hiccup last weekend the LOC I was running blew and literally took the AAK 6k and my LF Audio HPVM with it and fried the wires throughout the car from a set of T-tap connectors that the original install shop used over 2 years ago it's my fault for not redoing the wiring to the LOC after 2 years so I'm chalking it up to inexperience but I have it bumping on a brand new CAB-45 V2 I'm having to redo everything just to make sure I don't get a short again but I still have the AAK 180.4 to go on the doors and the AAK 6k and LF Audio volt meter are being sent off and will be back in the system soon

I would definitely go with Incriminator audio over audio ace if you're going to do it might as well go with the top notch brand and quality I have come to find out you get what you pay for and Incriminator audio is in my opinion the best out right now

@@SlamryCamry19 Awesome, I appreciate the honesty brother. Thank you.

@@MrMan-ol4ic if you have the cash I have to say I am thoroughly impressed with the Tyrant I've only put an 1800.1 on it so far and it was twice as loud as my two kicker Q-class L7 12's the cab-45 will be here tomorrow to hold me over until the AAK 6k is fixed

I have 2 IA Death Row 12"s with about 1200 watts to them. They hit loud, hard, and clean. Best subs I've ever owned. If you have the cash, go for it.

@mikegriego3671 I definitely will give them a try. Thanks, bro .

I promise I am new to this bro I literally just started the actual build about 2 months ago before that it took me a year to figure out the power supply and get it to 15.8 I'm trying my best to get it together I blew my brand new Deafbonce AAK 6k Sunday morning from inexperience and had to order a new CAB45-V2 it's supposed to be here today so I can get bumping until I can get the AAK fixed

I'm going to most definitely to give it a better look just waiting to get everything installed before putting everything back together and making it look pretty

Thanks bro I'm trying my best to get it playing my LOC had a short and blew and I'm pretty sure it took the AAK 6k with it really disheartening to say the least and two weeks before I was going to make my first EVER show (XS power show in Knoxville) trying my best to get a new amp now

@@SlamryCamry19 It will come on time Bro 😎 just stay positive

@@eugeneirons7907 I'm trying I just went through the process of checking everything on both amps and they are definitely blown the kicker amp came on and as soon as I touched the positive and negative with the multi meter it went straight into protect and won't come out now and it shouldn't have done that I was just checking the AC voltage I really need someone in the middle TN area to help me BAD I'm completely clueless as to what caused all of this everything was playing fine and then nothing and now trying to check everything out I've blown my backup I don't know what to do I'm scared to even buy another amp

@@SlamryCamry19 there is a great guy in your area , Chris at Crazy Hobbies on KZbin and Slim Reaper both are in your area

I'm no expert but to my understanding the tinned or silver plated are to prevent corrosion but give more resistance (fractional amount) then the copper but there is a difference nonetheless I myself use tinned OFC ferrules I don't think it's enough resistance to matter unless you start talking about brass or aluminum compared to copper

Yeah I had it working for about 10 minutes and pulled out of my driveway and made it a 1/4 mile and it just stopped playing I've checked the sub, amps and all other electronics and everything is fine really upsetting to say the least I'm literally in the driveway right now trying to find out what the issue is I'm told if my amp has power and was playing and cut out during the drive that it's more than likely a loose connection breaking the circuit but I don't know

@@SlamryCamry19 check fuses

often times when my set up did not play it was a broken/loose/burnt fuse

@@Zachecker I have identified the problem after almost 12 hours of searching the original t tap connectors that the install shop used to give signal to my LOC are faulty and cutting in and out I can literally touch them while music is playing and the sub starts pounding I'll have it fixed in the morning

@@SlamryCamry19 ay at least you figured it out though 💪

Will do more videos coming soon

Yeah I saw a video Mrchocolate posted showing it at the booth it's going in soon bro I just got the enclosure mounted to the platform this morning and all the wires run to the back going to cut a piece of MDF and screw it to the floor of the trunk and make a big amp rack with everything laid out should be posting flex videos this weekend going to work on it every morning before work this week

@@SlamryCamry19I can’t wait

Thanks bro I'm trying I've run into dead ends all weekend the enclosure won't fit in the trunk so I had to build a platform for it to sit on where the rear seat goes and I can't get it to lay down right lol it's in the car but standing up sideways with the sub facing the driver and the port facing the roof lol it's been a major headache doing it by myself my ol lady weighs 100 pounds soaking wet she can't lift anything to help me maybe I will have it together before next weekend

@SlamryCamry19 I feel it. Luckily I got a crane here at the shop I work at. Each one of my subs is 70lbs each so lifting a box w em is ROUGH! I actually am waiting for pre-order of the basshead garage watt meter too lol. I see u like all the nerdy details like I do 🤣 I got a sparked innovations conductor also that shows amperage pull. I just bought that sparked innovations fuse box too. Got it half price for like $45.

@SlamryCamry19 and when u order a box, it's best to make a mock up cardboard one to see if it'd fit. That's what I had to do when I ordered mine. Kinda alot of work but paying $750 for a box, you wanna get that right lol.

@@1ohmwrecker yeah I have both of them the 12 fuse and the 4 channel relay I haven't hooked up the 12 fuse yet but I have so much to do I usually don't wake up until 10 because I work 2nd shift but the XS power show is literally like 2 weeks away so I have to get it done I have to get the box anchored this morning before work and then TRY to get the sub installed I don't have the conductor YET but it's coming along with the NELO MEDIA Subwoofer temperature monitoring system and LF Audio wireless volume controller pro I just decided to stop ordering stuff for a little while because I have so many boxes in my spare bedroom that still needs to be installed

@SlamryCamry19 yeah I haven't used the fuse box yet either. I just got a dual amp rack, a smart bass 8k (boss black model) and a bunch of other stuff. I'm doing a lil upgrading. Deff want some more power on tap. Those sundown Xv3 12's just laugh at the smart bass 5k lol.

I guess I should have watched all the video about your box, sorry. Hopefully you get it to fit.

It's going in there bro I just have a bump in the road it won't fit in the trunk but will fit perfectly right where the rear seat goes and be louder inside the cabin

Yeah I'm having some issues I received the D4S HD3 single 15 enclosure and sub Friday and they won't fit in the trunk LoL so I am having to redo everything I tore my entire car apart yesterday it was bare inside except for the two front seats I'm going to have to build a platform for the enclosure to sit on where the rear seat goes I've been up half the night trying to figure it out going to Lowe's in a little while to get materials probably going to need help with it look for a new video later I will be posting one asking for help and ideas to make it work properly but I plan on redoing the deadening material with something stronger at least 160 mil if not MDF

It's possible that one of the coils is damaged and is shorting out at some point in the travel. If it's like an intermittent short the amp might protect, but it shouldn't be thermal related. You might try wiring up one sub at a time and playing it, but not too loudly and see if one sub plays fine, but the other causes the amp to go into protect. Also, inspect all the wiring that you can see. Check that the terminals are tight and the speaker wires are not touching the frame. Look over the tinsel leads for any burning or other issues. Gently push or pull on the cones to listen for any scraping.

Yes they are dual 4 ohm and after taking the box and everything out and removing the subs come to find out the original spade connectors the install shop used had worn out and the ground came disconnected during playing and instantly threw the amp into protect that will NEVER happen again I won't use anything that doesn't have a push terminal or ring terminals but the new enclosure came in this morning the D4S HD3 single 15 enclosure with the triple baffle and double sided all the rest it's a good heavy duty box for the Tyrant and it has good strong ring terminals and I have 4 gauge OFC sky high power and ground for the SPEAKER wire LoL that should do it but the box wouldn't fit in the trunk or at least through the opening sooo I'm going to take the trunk apart this weekend and try again if not I will be building a platform/floor lvl with the trunk up to the rear seat and use the prefab until I can make my first show and meet some people to teach me how to Properly build a wall/4th or 6th in the rear seat area

@@SlamryCamry19 Glad you got it sorted. 👍

Thanks bro I can't wait for the Tyrant to get here I hear it's a monster

D4S 6x9 and 6x5

It's coming together got the enclosure in today it's too big for the trunk LoL 😆 I guess I will have to make a platform in the rear seat area or cut the rear deck out it's going in there

@@SlamryCamry19By ANY means Necessary 🤷🏻‍♂️🤣! I just got done wiring my 4channel, sub and amp already done! Just waiting for it to cool down here, it’s like 92 🔥 and I don’t have a garage, and I need to sound deaden my whole SUV! 🥵🤦🏻‍♂️

Actually I'm thinking about ordering a dual Amp rack so I can stack the AAK 6k and AAK 180.4 on top of each other to save some room I will know more when everything comes in and I can see it laid out but I'm on it bro probably going to get another fan for the amps as well

Wow. You just gave me an idea. Thanks.

I've heard really good things about them and it's a Korean board I wanted to get something of good quality for my first high powered setup so it hopefully lasts awhile my D4S Single 15 Enclosure is supposed to be here this morning and the sub shouldn't be too far behind and we will see what it can do I'm stoked to see it in action I got to hear a salt 4k on a single ZV6 12 Monday and it was moving quite a bit of air for a single 12 I'm hoping to see better results from this setup

I can't wait bro I've been up since 5AM waiting for the Enclosure to arrive I'm really excited about this build I've never heard anything bigger than a 4k and I just heard that Monday a salt 4k on a ZV6 12 and it was super impressive for a single 12 I'm hoping to see better results from the 15 and the 6k

I think you will 🔊🔊👍🏿

Thank you kind sir I appreciate it I will be posting more videos of the build this weekend with a few unboxing videos

Thank you for checking it out I'm nervous I'm going to mess something up I've already had a few close calls but I'm trying my best

Don't be nervous just go for it!! The hard work will pay off I promise

Already on the way bro I'm waiting for a 15" Incriminator audio TYRANT rated for 5K RMS to put on my AAK 6k and I have 4 gauge speaker wire for it so there's no mistakes next time I also ordered a new head unit, DSP, four channel AAK 180.4 , D4S 6x9 and 6x5 door speakers all kinds of stuff to install this next weekend before the sub arrives I also have a D4S HD3 single 15 enclosure that will be here tomorrow I'm going to do an unboxing on it and the sub because I haven't seen anything on either item on here stay tuned coming this weekend and whenever the Sub arrives which shouldn't be long now it's been over a month since I ordered it with a 20-25 business days build time I'll be hooking everything up and tuning with the DD-1 and CC-1 should be able to give a demo of the doors this weekend

Oh bro I am on the way I just got tracking info for the enclosure FINALLY!! It's on the way and it's been 26 business days yesterday for the sub so it should ship next week I think I might be able to make the XS power show after all I'll be posting some more videos tomorrow got a bunch of stuff in this week and God willing I make the XS power show I will get as much footage as possible I can't wait