ndchevy4fun

Пікірлер

@danieljacobson5774 3 ай бұрын

Learn how to shift..you never lift on the gas peddle

@KD2HJP 4 ай бұрын

This looks fun, and warm 🥵

@dieselking6812 5 ай бұрын

Ah yes the 327 my friend has a 56 with a doug Nash 5 speed

@1978garfield 6 ай бұрын

Those sold for the equivalent of 30 grand when they came out. I am amazed they sold enough of them for there to be survivors today.

@dougdubson5975 7 ай бұрын

It's like a beautiful candy shop.

@JoeMaster-r3l 7 ай бұрын

Jesus

@JoeMaster-r3l 7 ай бұрын

Yes please

@dirtfloorcustoms484 7 ай бұрын

Man you drive the hell out of it🔥

@salpolichetti5599 7 ай бұрын

Nice set up

@dougkaylor2528 9 ай бұрын

talk about granny shifting,, lol

@JackSoffalot 10 ай бұрын

I’m rebuilding a set of gold dust twins now.

@ronbaker7501 10 ай бұрын

My brother had a 59 El Camino with a "lopey" 66 Corvette engine and a 4-spd. Rockcrusher? If there was I a time I could go back to just to hear it idle at a stop when I pushed in the clutch.

@thomastrotta7859 11 ай бұрын

What's the top speed with 4.88's?

@ndchevy4fun 11 ай бұрын

4.88 rear, 29 inch rear tires, 6500 RPM = 115mph

@joewilley7776 Жыл бұрын

Such a great engine

@nickgutierrez4536 Жыл бұрын

Omg 🤣 that's fantastic 👏 it's like I'm a teenager all over again 😁

@CharlesHarpolek4vud Жыл бұрын

New hams, find one of these receivers and use it for a couple hours and find out what a smooth operating, beautifully sounding ham rig is like. The CW note on my 75A4 to a Collins speaker was the cleanest, most elegant music you could hear. You do not have to own a Chinese toy to be a ham-- there was an Art Collins era, now sadly passed on.

@toneocaster Жыл бұрын

Oh yeah!

@M21L35 Жыл бұрын

Very clever w/the lever!....though there was no reason to lift while shifting.

@paulacri604 Жыл бұрын

Love the stove bolts (55-57 Chevys). Had a couple of them 'back in the day' (stock 57 ragtop and a built 55 210 post 2 door). I have that exact same Sun tach mounted in the same place on my 71 Chevelle Malibu 400 ragtop. It's had a residence there for over 40 years and is still working well.

@magnus9165 Жыл бұрын

I had a 56 2 dr post that had a bored out 283 that screamed. 3 speed on the floor. That was 1970 or 71. 1970.

@ndchevy4fun Жыл бұрын

Yes the 283 ! ran a power pack 283, 4 speed, 3:55 posi in 55 hard top in 1974-75. it was a fun setup and held it's own.

@segarza Жыл бұрын

I had a friend that used to race a 67 mustang and he always used to tell me, "if you want to win, you gotta drive it like you hate it".

@ndchevy4fun Жыл бұрын

yep used to do that, broke everything, sure was fun

@brucehumbolt9975 Жыл бұрын

Glad to know someone knows how to shift a 4 speed

@lonniepitt28 Жыл бұрын

Sweet, brings back wonderful memories, I had a 56 Belair 2 door hard top with a 327 had a Crane SS 330 Solid Lifter Cam, Muncie 4 Speed and 411 Posi traction. My oldest brother built the engine for me. It was bad to the bone too !

@67chevellepost Жыл бұрын

How has the t10 been in the car?

@paulcook7888 Жыл бұрын

I remember those days ❤

@paulcook7888 Жыл бұрын

488 rear gears will get you there pretty quickly ❤

@ndchevy4fun Жыл бұрын

yes it will , for a short blast anyway

@daryllect6659 Жыл бұрын

Not even CLOSE to 7500.

@fastrat37 Жыл бұрын

Nice pass! I believe I heard "3rd-gear Rubber" on that run as well, precision shifting too! Love it!!

@ndchevy4fun Жыл бұрын

There is 2 runs in this video, first one was first time with this 327, first time with this deep first gear T-10 and the 4:88 gears. I had now idea what to expect, second run went smoother until the foot feet stuck for the 3-4 shift. Old video but still fun to drive.

@ianmilne1185 Жыл бұрын

Excellent driver. A 327 Open Headers + a solid life cam.. Dual point..

@ndchevy4fun Жыл бұрын

just something about that combination

@davekana8388 Жыл бұрын

At the end column mounted Sun Tach drops to zero. What?

@ndchevy4fun Жыл бұрын

Good eye, I was holding the camera in my hand shifting so it move as I moved the steering wheel. My shifting hand was free and I shut the key off to coast. Can see the key is off but not locked. The key or key chain will also show double time in one of the videos back when I had a 350 in this car. Lots of things going on in this car videos. The video with 327 and 4:88 rear gears was the first time I drove this new 327 and had installed the 4:88 gears in the rear. It broke loose in first and I didn't really have a plan when to shift was just listing to the way the engine sounded. I get so many comments about not power shifting and lifting BS. Just think about it, first time out and you should power shift? anyway it is a fun car and has seen a lot of changes in the past 40 years. Oh yea a solid cam would make 8 grand shifts. Normal shifting is at 6k for 1-2 and 7k for the 2-3 shift. Then back to 6 for the 3-4 shift. This is a 1980 Z-28 tranny with deep first gear. Not a close ratio. So that's why the tack drops to Zero.

@aaronbode9622 Жыл бұрын

Haha, my dad was right lol, those 327’s were fast, my grandpa had a 1966 Pontiac Beaumont Sports Deluxe Coupe A Body in that dark wine red same body style as the chevelle, gto and lemans but it was only built for Canada basically the pontiac version with chevelle headlights, grandpa put a chain around the front deck one of the house’s my dad grew up in, in Ontario, Canada with that car and ripped it right off the house with a heavy duty chain hahaha 🤣.

@shitbox82 Жыл бұрын

Still one of the best videos on KZbin, I love it! 😎👌🏻

@jblovell9065 Жыл бұрын

Old school cool

@JasonRSmith-ch5gs Жыл бұрын

Bad ass

@johnsheetz6639 Жыл бұрын

Damn I'm going to watch this one again!

@74dartman13 Жыл бұрын

That brings back memories of my 62 Impala, 327, 4spd., 4:56 gears...it would throw ya back in the seat!👍😎

@ytwhite5930 Жыл бұрын

That 7500 rpm shriek never gets old...Especially behind somebody that can throw full throttle shfts...

@PFinkoloTL87 Жыл бұрын

What rpm at 60 mph?

@davebruton5731 Жыл бұрын

Sounds Great , but what rpm did you shift @ ?

@loganpeterson3931 Жыл бұрын

I love this video! It really doesn’t take much to wake up a 327. I just added a 268 comp cam and edelbrock intake to my ‘67 327 with the stock 1:94 valve double hump camel heads. Then I swapped out the 2:73 rear gears to a 12 bolt 3:31 and Muncie M20. In my big ‘67 Impala coupe it sure moved (not as insane as yours though).

@AmishSpecialForces Жыл бұрын

A man after my own heart, Collins, Central Electronics, McIntosh. I have the same 75A-4/200V setup and run the audio through my C26 to my MC2505. Sounds great! I need to hook up my R-390A to the Mac via the “diode load”, but haven’t got around to it yet.

@ndchevy4fun Жыл бұрын

My favorite receiver the Collins 75A-4. I picked up the CE200V at Dayton Ham Fest 2008 and spent a whole winter bringing it back to life and up to spec. Fun station along with my GDT’s the 75A-4 and KWS-1 make for lots of HF fun. I run a Collins R-390A with my T-368 but used Heathkit stereo with it on the rear diode to listen Angel Music. Bought my C28 and MC2100 new 1975, it is a wonderful sounding setup!

@AmishSpecialForces Жыл бұрын

I don’t have a T-368, but I have three R-390A’s, an R-391, an R-725, and two R-392’s. They just seem to find me after I bought the first one. Amazing receivers! I also have a modified 75A-1 that is almost as good as the 75A-4, but not quite. I need to set it up to switch between the 75A-4 and one of the R-390A’s and use them with the 200V. One of these days I’ll get around to that too. My McIntosh setup I just recently acquired, traded a Marantz 18 and some repair work for them. Great deal if you ask me. Along with the Collins stuff, they’re something I’ll never get rid of.

@ndchevy4fun Жыл бұрын

@@AmishSpecialForces what your call de kf0hr

@jamespepper2541 2 жыл бұрын

You still have your nova? If you do you should make an update video!!! 😎

@ndchevy4fun Жыл бұрын

James , my 77 Nova has been retired from drag racing 12 years. Each year it gets closer to being put back to street car.

@jamespepper2541 Жыл бұрын

@@ndchevy4fun I'm glad you still have it!!! 😎

@gregkelly5583 2 жыл бұрын

My grandma shifts faster than that

@mattwoody1089 2 жыл бұрын

The car no for Daly oshalaly mike paye

@randywatsonii3173 2 жыл бұрын

That looks really fun

@looxmaxxingpro 2 жыл бұрын

Morse code at 420kw

@ndchevy4fun 2 жыл бұрын

AM at 325 Watts!

@dougharlow6037 2 жыл бұрын

In the 60s, I a had turquoise/white 57 Chevy with a corvette 327, 4 barrel, 4 speed and I raced, on the freeway in San Jose CA. a Dodge Dart 273 4 speed and it walked away from me like I was standing still. I was so embarrassed. The guy even slowed down to ask if I was having troubles or I didn’t want to race. The car was beautiful, I wished I had it today.

@ndchevy4fun 2 жыл бұрын

My oldest brother has a 65 Barracuda 273 HIPO with auto. It screamed, 327 cars had to look at tail lights.

@Gaspipenicklioni 2 жыл бұрын

That was probably a dodge 340, he was lying

@DANTHETUBEMAN 2 жыл бұрын

Reminds me of the good old days.

@chrishansen7004 2 жыл бұрын

damn man these 327's are slow as fuck 7K rpm shifting and still at 0 mph

@davedavis775 2 жыл бұрын

Nobody noticed the tach suddenly dropped to zero. 😅

@maggs131 Жыл бұрын

That's a sun tach for ya. Some tachs will kill the engine they die

@robertlipsey6056 Жыл бұрын

He probably blew the motor up.

Ең жақсы KZbin

Пікірлер