Well, at least you're not wearing shorts and sandals. 🙄 There ya go!
@ShularWood27 күн бұрын
Do i need to lol? No i wont do that. Might not wear the chaps all the time but im not crazy enough to shorts and sandels actually cutting trees
@georgedavall944927 күн бұрын
@@ShularWood Ha Ha thanks for reply. Forgive me as I was being a bit sarcastic. I see way too many influencers not wearing proper PPE. Good to hear You do wear chaps. I get it, PPE can be a nuisance, and it always gets hot under my Husky forestry helmet, but that screen and hard shell has saved me many a time from minor injuries, and the ears muffs are essential! I’d gladly trade the minor discomfort from wearing gloves, helmet, chaps, etc, for the possible life changing traumatic injury. I DON”T CARE who You are out there, accidents happen to the best of them. Be safe! Peace! 🤝
@ShularWood27 күн бұрын
@@georgedavall9449 yeah i have chaps i wear. Im in in the woods with brush or cutting in a way that my legs are at a risk to get cut.
@larrywarner9314Ай бұрын
Take a good flat file and take about two strokes off those rakers and that saw should cut a little better
@ShularWoodАй бұрын
👍
@larrywarner9314Ай бұрын
Here's a free tech tip for the 3120 , buy an OEM black coil for 272 xp and that'll take care of the saw breaking up no rev limiter
@ShularWoodАй бұрын
I was wondering which no rev limit coil would work for it.
@jerrylyles8999Ай бұрын
It is a larger cc clone of a redmax/zenoah 5200.
@ShularWoodАй бұрын
Thank you sir. I wasnt sure. I got it to see how it was.
@huskywizАй бұрын
Was thinking of buying one but Stihl 881 won ,could have saved 1300 £
@ShularWoodАй бұрын
I like the stihl 881 juat couldnt beat the price
@huskywizАй бұрын
@@ShularWood Need a 3120 to add to my collection Xmas coming ,Ali Baba say £280 dollors for clone is that good price
@ShularWoodАй бұрын
@@huskywiz how much is that in US dollars
@huskywizАй бұрын
@@ShularWood That was US dollars Ali BaBa
@akhan3682Ай бұрын
@11:27 Thanks for doing the important bits off camera
@ShularWoodАй бұрын
Sorry didnt catch that. There is a little screw on the side that is a grease hole.
@scottfoster2487Ай бұрын
Your kidding me they actually made this saw with a pro clutch drum,that is a huge improvement over the stock saw. I wonder how this saw would handle non safety low pro 3/8ths 18 inch bar ? I would love to try one these with 325 full skip.
@ShularWoodАй бұрын
I have ran it a lot since the video and it has ran flawless every time. I like the 16 inch bar. I have a 20 on another saw i think might work im gonna run one day just to see.
@dinkoterzicАй бұрын
kolrga where did you buy it. how can it be bought for Europe. Greetings
@ShularWoodАй бұрын
Neotecworld.com. I do not onow about Europe delivery tho.
@adrianstefan23Ай бұрын
👍👍👍👍
@ShularWoodАй бұрын
Thank you
@adrianstefan23Ай бұрын
👌👌👍👍
@ShularWoodАй бұрын
Thank you
@giuseppelatina2640Ай бұрын
Good presentation 🤙
@ShularWoodАй бұрын
Thank you 🙌
@aprilnylund7780Ай бұрын
Are you still satisfied with this product after 3 months? How do you adjust the carburetor?
@ShularWoodАй бұрын
I am extremely satisfied with it. And havent had to adjust this one. But its a single screw. The littler version needed leaned out just a tiny bit.
@aprilnylund7780Ай бұрын
Have you used the blade attachment? I was wondering if you could use it to take out saplings. Oh because of your reply I bought one BC520 so thank you for your honest review and reply.
@ShularWoodАй бұрын
@@aprilnylund7780 I have used the blade attachment. The blade works ok but if u hit something hard with it it will bend easy. I wouldnt cut anything more than thick grass with it
@matthewknight5641Ай бұрын
Id love to have that 8120 for a stump saw. Im only 135 lbs so i aint so sure i could run it but id sure try
@ShularWoodАй бұрын
They arent that heavy
@nsatodayАй бұрын
@@matthewknight5641 big thing is long bars. 881 with a 59” is awkward, so not weight per-say but how such a long bar makes it balance weird. Once you are in a cut the wood is holding the saw. The Gym is also not a bad idea
@matthewknight5641Ай бұрын
@@nsatoday I'm in pretty good shape I've just always been really little. I run my 660 just fine but I'd say a saw that weighs 30 or 40 lbs is probably more than I'd want. Especially if I had to make more than a one or two cuts. Saws are more of my hobby anyways. I'm normally just a flat bed truck driver that's rarely home to get to mess with my saws
@IndianaDougАй бұрын
Good review👍🏻
@ShularWoodАй бұрын
Thanks! 👍
@nsatodayАй бұрын
Looks good man. Was that a Stihl 090 clone you brought out when the husky clone was stuck?
@ShularWoodАй бұрын
It was a 070 clone built to a 090.
@CuntyMcShittermanАй бұрын
next time you get the bar pinched like that dont let up on the throttle keep the rpm going and slide the saw out. it will want to come out on its own
@IndianaDougАй бұрын
Good job👍🏻
@ShularWoodАй бұрын
Thank you, sir.
@matthewknight56412 ай бұрын
I wonder if it was ported like a 660 or higher Rev saw how it would be?? I think it's awesome like it is but ported to turn some real rpms and look out lol
@ShularWoodАй бұрын
I have thought about the same thing but im almost afraid to. 66mm is a heavey piston to be slinging around to fast. I did remove the baffle on tbe front of the muffler and it helped alot. As a 105cc or 120cc it wasnt as restricted as a 137cc it was restricted bad woth thst little delfecter/baffle on it.
@matthewknight5641Ай бұрын
@@ShularWood Id say as long as the crank and piston are balanced really well it would be ok with higher rpm but if it's off balance it might sling it's self apart. I'd love to have a saw like that as a stump saw
@matthewknight56412 ай бұрын
I'd love to have that saw. It's absolutely a beast
@ShularWoodАй бұрын
Easy build man and if ya not fimilar with saws a good way to learn a little on how they work.
@luebkeb2 ай бұрын
Whats a moster?
@ShularWoodАй бұрын
Sprry typo. I try send these out as im going to bed so phone will upload on the charging stand.
@lifebehindtheaxe38352 ай бұрын
I've got one I use some
@ShularWoodАй бұрын
Amazing little saw for 1/2 price of name brand.
@adamherold39912 ай бұрын
What is the orgon replacement chain part number
@ShularWoodАй бұрын
Im not sure about that. Is a .325/.063 woth 62 drive links. The same size as factory Stihl 250 chains.
@adamherold3991Ай бұрын
Thanks for your help and time. I guess where I was hung up was it shows the gauge of the chain in the specs for the saw as 0.50 and ms250 show the 0.63 guage chain. However, I trust your advice, and thanks for your help
@imretoth23412 ай бұрын
😂😂😂
@ShularWoodАй бұрын
??
@NEOTECProTools2 ай бұрын
Thank you so much for featuring our chainsaw! We love how you showcased its features. Your support means a lot to us! 🌟 #NEOTEC
@ShularWoodАй бұрын
Thank you
@melgarguitars2 ай бұрын
Do you use 40:1 in that?
@ShularWood2 ай бұрын
I use amsoil saber 50:1
@melgarguitars2 ай бұрын
Thanks for the video. Helped out lots
@ShularWood2 ай бұрын
Glad it helped thanks for watching
@loweralabamahomesteading46612 ай бұрын
I love my neotecs!! I also have the 038 clone in the 872i and that saw if an absolute beast!! 2 years and multiple big oaks and not a single problem. I have 3 or 4 more neotecs and other than some small things which Neotec took care of immediately I've had very little issue. I would love to know what the squish is on that saw. I'm willing to bet with a base gasket delete and a muffler mod that saw would pull the heck out of a 20" bar. You said the heat index was 105 this day and judging by your accent ide saw your not to far from me lol. I'm in South Alabama and the heat index 2 days ago was 112 so I feel your pain. Great review!!
@ShularWood2 ай бұрын
Thank you. Yeah it probably could get meaner with some work but right now gonna leave it stock till im done testing im gonna leave it stock. I have a 872i thst i did a timing advance and just threw a home made muffler mod on that is mean. Ive got a buddy of mine that does porting that is gonna work on a 872 and we will see how they hold up ported.
@plumberjoe802 ай бұрын
The MS-250 is a great little saw. I’ve been thinking about adding this guy to my collection.
@ShularWoodАй бұрын
I love it. For little stuff its my go to around house.
@Teyaksha6202 ай бұрын
😮😮😮
@ShularWoodАй бұрын
??
@chadshell78153 ай бұрын
Just received the same weed eater and mine will start up but bogs and stalls when throttled. Have you had similar issues.
@ShularWood2 ай бұрын
No i have not. I did adjust my carb a lolittle cause it was running rich after it broke in some.
@OSHAJobHazardMitigation3 ай бұрын
What’s the weight of the bar without the chain?
@ShularWoodАй бұрын
Just shy of 4lbs.
@e954rr23 ай бұрын
Did the big bore have more power
@ShularWood3 ай бұрын
It helps.. i prefer the NS872I but i been running the NH872 lately after i modded muffler and its doing real good cant complain.
@shop81093 ай бұрын
@@ShularWoodis there really much of a difference between the two? I’m looking at both of these and I can’t decide which to go with.
@ShularWood2 ай бұрын
Sprry for delay. Yes the NS has i bit more torque at higher rpm it seems. May be wrong but it feels that way.
@williamgrissom19954 ай бұрын
How are you liking the ns872 so far? It looks like it's cutting pretty good. I just bought one and it should be delivered next week. I really like Stihl pro saws, I just can't afford them. Lol
@ShularWood4 ай бұрын
The NS 872 is my go to saw.. I love it. I may run others when i cut but th the ns872 is always with ne. I dont go to cut without it
@DanielTinney4 ай бұрын
Bad video
@ShularWood4 ай бұрын
What bad about it??? Would love some feed back on how to improve.
@lepermessiah66b2 ай бұрын
How, one of the only videos on these products and your gonna complain, how pathetic😂
@deanafАй бұрын
@ShularWood The mic. It's impossible to hear you talking. The entire unboxing, it was just bangs and clunks. To hear you talk, I had to crank the volume so high and try to turn it down when you weren't talking.
@deanafАй бұрын
@@lepermessiah66bThere's a lot of them.
@deanafАй бұрын
I watched some of your other videos. They are fine .
@TodDistler4 ай бұрын
Yeah, the microphone wasn't picking you up.
@ShularWood4 ай бұрын
. Ill try get a mic sometime in the future thank you
@robertzalaker47754 ай бұрын
i ran husqvarna saws for years.my last one lasted 15 years but i could not justify over 1500.00 for a new saw at this point.so i got an ns892-36 inch and its not bad for 1/3 the price. now i think i will order this 52cc weed wacker.
@ShularWood4 ай бұрын
I love these things reasonable price runs great..
@mickeyd89694 ай бұрын
Don't waste your money like I did. This brand is garbage
@ShularWood4 ай бұрын
Been running Neotec saws for a year now processing firewood. I have 4 saws and 2 weedeaters. Nothing but minor issue that can be fixed easily. Nothing that other manufacturers havent had. If ya dont like them then ya dont like them. The proformance i have gotten for the price i cant complain. Beats 1500 on a single saw.