Some people are just lucky to have a tunnel I say 😁

Why do you talk like that?

Dog

That's very weird ... why on earth would anyone put petrol in a diesel tank, especially when you intend to sell it? Did you ask him?

Previous owner of my boat did the same damn thing with both water tanks, which you cannot adhere anything to that type of plastic. It must be re welded with similar plastic. Anyways I have to replace both port and starboard shelves for those tanks and port side is what the rudder turning block bolts to😒

Is this your boat, what year is it? I have a ‘73

Well done bro!

LIVING THE DREAM 🙌

Summer 2020

I have this. It's not working properly, and the full tank indicator keeps turning on, even though the water tank has been drained, what's the solution? Thank you very much.

what boat is that?

Love the boat , I’ll watch

your forestay is way too loose, I think. also looks you'll have to climb up there to figure out. definitely never force grind it up, it WILL always damage something. if it doesn't go up, try let it go the other direction and see if it is still stuck. finally definitely use some McLube (basically PTFE suspension solution) , very effective if it's just friction

Brooo, I didn’t know you had footy of the whole process! Niiiice, man people gonna love this story haha! I can tell y’all as someone who’s seen this story unfold, there’s some epic stuff to come. Between the gas in diesel tanks and the noodle mast plus all the other crazy stuff, you got one heck of a tale to tell bud. Stoked it’s goin well man. Livin the dream!

Bummer. Have you contacted the previous owner to guilt trip him at least?

Is that a Perkins 4.107???

I just purchased a Morgan 41io ketch. 1983. I will be following you for some advice. I did not get an inspection. Was on the hard for over 8 years as i found out. Here we go!!!

The capacitor does not need to "charge up" before the compressor starts. It is an AC circuit. The voltage and current reverse 120 times a second.

Thai man sexually assaults women , stay away from him

This man sexually assaults woman on his boat, stay away from him.

Another E35-2 owner here. We sail mostly on Genoa only and hit 6-7k often in Ventura California. These boats love to sail!

A lot of fond memories of 13 years sailing out of Berkeley!. Now sailing out of Vallejo. Thanks!

I’m so lost all I gotta do is remove dip stick and I can remove from bottom that’s it I don’t have to remove intake manifold ?

I think you're docked next to my old boat Windrose!!

reminds me of my cal 34

How can i convert for the thermostat of ac of hond del sol.. because my themistor sensor was already busted

I've found that a common problem leading to many failures is gov't overreach and regulations...... all for your safety.... of course. Great video on getting gov't out of the dehumidifier. Lol

What if I use 3 prong switch?

Fantastic, great tutorial. Thnx

I am trying to do this however I don't have a power coming from the blue and red wire

Thanks for the the video, just did the fix on my dehumidifier

I'm still debating whether I want to do this repair or pull the climate control box,open it up, and solder the broken joints,I just did that with the speedometer on my 85 Civic.

Milkshake oil problem has been fixed! Motor is back to healthy shape. Was a bad water pump seal allowing freshwater into the engine crankcase. Decided to bypass the old water pump and installed two electric pumps instead.

yeah, all my dehumidifiers have died after a while because it is all cheap Chinese crap and the government trying to make everything more efficient it is not efficient to replace a dehumidifier every 5 years because of too many gadgets to make it run the way the government wants not to mention planned obsolescence of all these companies to make more money

Sad to see the milkshake oil. Clipper cove is a great choice for anchoring!

Nice show ,but you’re music is to loud.

Sailing on and off anchor is the best!

Sorry to hear your engine is down. Old boats have problems, hope you get the engine running again. I have to replace the rudder tube on my 1979 Ericson 25+ which should be to much fun.

Artic monkeys!

Mi same model is new and is dead any ideas???

Thank you for this. I didn't want to buy another climate control just to possibly have the same issue.

Dangerous. Grrrr

You didn't show how to take the frame off :(.... I needed that part, because I can't get mine off. But thank you anyways!!!

Looks like the same model as mine. I wish you would have shown how to remove the control/circuit cover. I can't for the life of me figure it out. All the screws are out. It pops up in the middle but the skinny ends won't budge no matter how hard I pry.

i have 2006 bmw 325 xi can this starter be changed without pullin intake

Sir what is others ic number?

Thanks for this video, I followed it and my coils were not getting cold, so tells me that compressor lines are blocked or it leaked all of its gas

I picked up a rather nice and clean Whirlpool unit at the curb on garbage pickup day. I plugged it in and ran it overnight. The bucket filled with water to the point of shutting off the unit. But... I detected that occasionally when the electronics were powering the unit off, the compressor would remain running. Now, when the evaporator/condenser fan isn't running, but the compressor is, heat builds up. It doesn't take long for the thermal overload switch to trip at the compressor. Okay, let's check the relay operating the compressor... Sure enough, the control side goes high and low (12 volts) as commanded by the electronics. However, the power side remains hot all the time intermittently. Even with the power cord removed from the mains, continuity was at the power side of the compressor relay. A lookup of the number printed on the relay shows eBay has them for under $10 U.S. including shipping. A relay is on the way! Once the relay arrives and the faulty unit replaced, we'll see if that was the only problem or there are other issues in the electronic logic. Boy, let me tell you... The dehumidifiers sold today are pretty much garbage lasting barely out of their warranty periods.

Do you all have any videos of the other models having the same issues?

While you are stowing your fenders you can close the life line gate. ⛵