I don’t understood why anyone wouldn’t be able to understand the instructions in this video. It’s the perfect demonstration on how to use the machine.
@awfab3517Ай бұрын
Can I come by and buy a drill doctor?
@philipmarcou2 ай бұрын
Had one, motor is not good, underpowered poor quality.Spring system for referencing on flutes is not positive. It is overpriced and , like mine, does not last long only okay for casual day.
@puffnstuff122 ай бұрын
After decades of procrastination I went ahead and bought the 750X today so I can sharpen my bit set.
@AlloyedFrequencies2 ай бұрын
Thank you 🙏
@robertbryce76263 ай бұрын
I will NOT listen to a 2.1/2 minute advertisement for Summit Racing just to watch this video. Bullcrap!
@llVIU6 ай бұрын
1:55 you glanced over such an important part so swiftly... so the part on the left needs to be LOWER so that it doesn't rub??
@user-lk7me1df9x7 ай бұрын
Have several , none have sharpened like the Original 500
@nothankyou55247 ай бұрын
I dont need a sales pitch. I already have one. What I need is a good refresher video on how to use it!
@stanleydavis59888 ай бұрын
I sharpen all my victory knives with that and they are Sharp As a Razor
@devildog95959 ай бұрын
This man is the missile guidance system
@crabapple677511 ай бұрын
Excellent instruction, thanks much
@crabapple677511 ай бұрын
boy, that some ingenious product design there ! Intricate planning and detail.
@saket29 Жыл бұрын
I'm really pleased with this! It works like a charm kzbin.infoUgkxDcr-y2Pf6xdnrFHrSP7dl9kpKaCozcSQ Takes less time than my old electric sharpener because it can take more off the knife faster, and then it smooths out nicely with the finer grit polisher. I don't know how long it will last before the grit wears away, but I wouldn't mind having to replace it every once in a while.
@saket29 Жыл бұрын
I'm really pleased with this! It works like a charm kzbin.infoUgkxDcr-y2Pf6xdnrFHrSP7dl9kpKaCozcSQ Takes less time than my old electric sharpener because it can take more off the knife faster, and then it smooths out nicely with the finer grit polisher. I don't know how long it will last before the grit wears away, but I wouldn't mind having to replace it every once in a while.
@andyjame2583 Жыл бұрын
I'm really pleased with this! It works like a charm kzbin.infoUgkxDcr-y2Pf6xdnrFHrSP7dl9kpKaCozcSQ Takes less time than my old electric sharpener because it can take more off the knife faster, and then it smooths out nicely with the finer grit polisher. I don't know how long it will last before the grit wears away, but I wouldn't mind having to replace it every once in a while.
@sachaleia Жыл бұрын
I'm really pleased with this! It works like a charm kzbin.infoUgkxDcr-y2Pf6xdnrFHrSP7dl9kpKaCozcSQ Takes less time than my old electric sharpener because it can take more off the knife faster, and then it smooths out nicely with the finer grit polisher. I don't know how long it will last before the grit wears away, but I wouldn't mind having to replace it every once in a while.
@8MADJACK Жыл бұрын
You should do a video on dressing the wheel too, the manual is ok, but some detail is vague
@livinglifemyway7349 Жыл бұрын
is this the same as the ddxpk?
@JimyP9 Жыл бұрын
Poor video instruction. Could have used close-ups. The written direction diagrams are too small for a first-timer to see. I know I'll figure it out after a couple of trials but DD could do much better than this.
@shortattentionspangarage1312 Жыл бұрын
Or, you could get some bi-focals. Just sayin'.
@niemdan Жыл бұрын
Such a half ass explanation
@bitjammer3042 Жыл бұрын
Short and to the point - fantastic. I just got the 750X and love it already.
@lmychajluk Жыл бұрын
@1:06, what's the point of the reference plate? Why not just have the plate in a position to hold the blade while in contact with the belt?
@Meekskydiver539 Жыл бұрын
Question do you consider this system worthty for s30v steel? I have a benchmade but im not sure if i should sharpen it on it
@devin2355 Жыл бұрын
Yes, absolutely it will work. Did you end up getting it?
@cyberdude721 Жыл бұрын
what a piece O shit I am sorry I bought this for my father he prolly hated me for this awful gift!!!!!!!!!!!!!! I can grind better with a shitty grinding wheel LOL dont buy this POS no wonder he regifted it to me LOL
@donswords6671 Жыл бұрын
A little confused. It says when adjusting the point angle, most twist drill bits should be sharpened on the plus + setting but the whole video it's placed on the center setting. Is the center setting for split points?
@neil139 Жыл бұрын
Yes. The "plus" is for standard point bits, the middle is for split points and the "minus" is for masonry.
@gavin4981 Жыл бұрын
Fy.,tdaeo'.ezzqo,.mvjqur
@quintonbennett Жыл бұрын
Great tool, not very good video for a couple reasons :(
@OthmanAlikhan Жыл бұрын
Thanks for the video =)
@TheMrdocmanny2 жыл бұрын
Very important to follow instructions i was doing it wrong the whole time 😂
@gizzyguzzi8 ай бұрын
the hole time? haha
@user-jo5fz8iw3b2 жыл бұрын
Will it work on kitchen knives??
@terry322 жыл бұрын
This video is not much better than the confusing instruction manual that came with the tool . He only really covers 'how to ' for a 118 degree bit . What is the alignment port setting for a 135 degree split point ? So much missing here !!
@davidhansen56282 жыл бұрын
Anyone try sharpening spade bit?
@timothylongley10562 жыл бұрын
How do I get one of these sharpening belt systems for my was 3000
@timothylongley10562 жыл бұрын
WS 3000
@steveposey84462 жыл бұрын
Awesome product Five-stars, love my XP !!!
@juleskeslar50572 жыл бұрын
What is the part # for the DD500. Please,
@Galdraz2 жыл бұрын
one shower thought later and im here now
@mehtaptopaloglu50192 жыл бұрын
👏
@williamhuang53292 жыл бұрын
Hanzhen harmonic gear , strain wave gear , robot gear , over 30 years experience ,
@mikeleuchs13262 жыл бұрын
I have one of these for 8 years and I think it works very well
@gerardtonno94582 жыл бұрын
Love my KO Edition. I've had it for a few years now and finally got around to providing this feedback. I got all the bells and whistles; The blade grinding attachment, extra belts and I even snagged one of the tool grinding attachments before they retired it. I also got a leather strop and what can I say other than this thing has enabled me to hone the best edges I've EVER been able to attain. I won't bother with anything else because this bad boy really does the trick, and they can't make it any easier. I purchased a Darex Drill Doctor years ago, and based on the performance of that puppy I knew the quality would be great on this device, and no doubt it certainly it. The only drawback is now I get to sharpen the whole families knives. I had to brag about how sharp I get mine, right? Anyway, it's nice to see an American company come out on top for a change. Great Job Darex!
@donovanllewellyn16992 жыл бұрын
is this the mk2 sharpener
@ferdinand25062 жыл бұрын
a closer focus would be nice
@user-ic5zn3zd7g2 жыл бұрын
[행정안전부] 내일 아침까지 기온 하강과 강설이 예상됩니다. 각 가정에서는 난방유지, 계량기 동파에 유의하시고 결빙에 대비 대중교통 이용 및 운전시 감속 바랍니다
@Jimmy_Cavallo2 жыл бұрын
💥💥 thanks for the great demo. 3:28 why does it sound like the motor is so weak that it is about to stall when the bit contacts the stone.?? 🤟🏼
@Jimmy_Cavallo2 жыл бұрын
💥💥 Thanks for this nice video. 3:08 I am not understanding this part because you are continuous rotating the bit and not holding it in a position where I’m expecting it to be locked into.
@keningilbert2 жыл бұрын
Great professionally made video but crazy how it ends so abruptly.
@edstoro38832 жыл бұрын
The video is worthless. No real detail, no explanation of why the 118 or 135, poor demonstration of the pawls, just plain bad. We are sure you know ALL this stuff. Good for you. (and I mean Darex, not the poor kid). No quality control by management. Actually I do not care if you know all this information. I care that I do not!
@GopherBaroque2 жыл бұрын
not getting audio... Where are instructions for aligning the tool post?