Жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
Пікірлер
@RastusMcbride 11 күн бұрын
Gotta be a better way, than butchery.
@IronMountainPlumbing 10 күн бұрын
@@RastusMcbride thought it came out pretty clean myself 🤔 let me know when you come up with a better way!
@RastusMcbride 9 күн бұрын
@@IronMountainPlumbing It is clean, I just can't won't drill holes in my dash. Personally, I (carefully) bent 5$ piece of aluminum tubing to go from bottom of the pass seat bolt and mounted a claw type RAM tablet mount to that.
@IronMountainPlumbing 8 күн бұрын
@@RastusMcbride I prefer having my devices up near eye level hence the reasoning behind the dash mounted solution. Also, my 100 was pretty rough so I didn’t have an issue drilling into the dash. If it was in pristine shape then I wouldn’t of touched the dash.
@lmalesci Ай бұрын
hello warm greetings from Pontassieve province of Florence Italy I am the esteemed owner of a 4x4 off-road vehicle Suzuki Jimmy 4x4 with a 1.3 LT petrol m13a engine, all original from 2001, all original that I usually use on rural and forest tracks and with the right mud tyres it goes well and for me the Suzuki Jimmy 4x4 even if it is completely original I see that it is in its natural habitat in tackling rural farm tracks and forest roads that are used by logging companies for the transport of timber with forestry trucks!
@IronMountainPlumbing Ай бұрын
Awesome! 🤙
@alpinecenter Ай бұрын
I've had 3 Land Cruisers and a bunch of Jeeps, and wheeled everything from Moab to Johnson Valley. You have a nice rig there, but what you need is an experienced spotter.
@albetherechillin Ай бұрын
Man that's a legit bumper held up pretty good imo. You gained .025 mpg with the new aerodynamics
@IronMountainPlumbing Ай бұрын
@@albetherechillin 😆
@dominicgreen115 Ай бұрын
Time for a aftermarket bumper! I have the rival and love it.
@IronMountainPlumbing Ай бұрын
Dang right!
@BluefieldsFisherman Ай бұрын
Nice Rig man, enjoy it
@IronMountainPlumbing Ай бұрын
@@BluefieldsFisherman thoroughly enjoying this 200!! Thank you
@PabbyRibbons Ай бұрын
Bummer about the damage man, but glad it wasn't worse. Pretty gnarly through that section!
@IronMountainPlumbing Ай бұрын
@@PabbyRibbons yeah it had me puckerin for sure. I guess bumpers are in order next 🤷♂️
@markmiguel3350 2 ай бұрын
Rig looks good🤙 Any rubbing and what did you do to make it fit?
@IronMountainPlumbing 2 ай бұрын
@@markmiguel3350 thanks! Plastics had to be trimmed and it definitely rubs on hard lines. Uploading a new video soon and there are a few scenes with some good rubbing with flexing
@johnkamau3678 2 ай бұрын
What tire size are you running? Looks sick!
@IronMountainPlumbing 2 ай бұрын
@@johnkamau3678 thanks dude! They’re 35” x 12.5” x 17”
@jraddd3477 2 ай бұрын
Use a small tad of grease or silicon grease on the airbox tube and its easy
@thewolfz1779 2 ай бұрын
💪🏻
@DurisM 4 ай бұрын
Nice looks on the rear wiper delete. Where did you get the plug from? Looks like a good fit.
@IronMountainPlumbing 4 ай бұрын
It was just a sink hole cover wrapped in black vinyl
@DurisM 4 ай бұрын
Can you tell me more about your wheel fender overlays? Where did you get them from?
@IronMountainPlumbing 4 ай бұрын
I believe they were Bushwacker fender flares. They were oem and installed on gulf state land cruisers back in the day.
@Mancitytreblewinners 5 ай бұрын
Oh my days
@coohjay 6 ай бұрын
what phone mount is that?
@IronMountainPlumbing 6 ай бұрын
It was a ram mount mounted to the ram track. I have a video of the install
@IronMountainPlumbing 6 ай бұрын
kzbin.info/www/bejne/rHzKZ5KDl6erjcksi=8zZdqefgNJUbRwq7
@yevgenykungurov574 6 ай бұрын
Good afternoon, friend. I ask for advice on what kind of departure do you have wheels for the 315/75r16 wheel? Thanks
@IronMountainPlumbing 6 ай бұрын
Hey! I am not sure of the departure angle.
@yevgenykungurov574 6 ай бұрын
@@IronMountainPlumbingThanks for the answer, friend. Please answer another question, what do I need to buy for the suspension to put the Land Cruiser 100 on 35-inch wheels.
@yevgenykungurov574 6 ай бұрын
@@IronMountainPlumbingWhat is the offset of the wheel?
@TONiiKs 7 ай бұрын
Is that your friend in the grey/silver f150 at the yellow post ?
@IronMountainPlumbing 7 ай бұрын
No but we did see him run into a bronco though
@TONiiKs 7 ай бұрын
@@IronMountainPlumbing was he drinking? Dude was flying down the road with no care in the world
@IronMountainPlumbing 7 ай бұрын
@@TONiiKs I’m not sure. I just saw him send it from the campsite to the main road and looked like he t boned a bronco
@MrSlamtana 8 ай бұрын
Can you share the measurements you did for the plywood cuts? Thanks!
@IronMountainPlumbing 8 ай бұрын
I have a copy of my rough draft I drew up. Can I email it to you? It has a bunch of dimensions.
@Kyle-uq2fc 8 ай бұрын
Ive watched a few vids on this as Im about to put a snorkel on my 100 soon and this is the best one Ive seen. Thanks bro, nicely done.
@IronMountainPlumbing 4 ай бұрын
That’s awesome! Glad to help!!
@latintrotter 8 ай бұрын
You make this video for what?
@kendrekmarrero5585 9 ай бұрын
I installed a 2” ome on mine a it’s also got some rake..if you get it figured out pleaseeee make a video😂
@IronMountainPlumbing 9 ай бұрын
After some time it definitely has settled. I’ve since added a rear drawer/platform and that has really leveled it out.
@avpr1c 10 ай бұрын
My 80 would look great in that matte black. do you have a color code or any pearls of wisdom going with that paint?
@IronMountainPlumbing 10 ай бұрын
I agree! It’s also extremely tough stuff. I’ve taken it through some gnarly bushes and it doesn’t even show. It’s Run Forest Run by Monstaliner. You can either spray or roll it on. I used a small rigid compressor and sprayed in my garaged. The hardest part was just prep work. That sucked
@miis05 10 ай бұрын
Happy to see you made it! Feels different seeing it through your eyes in the vehicle, usually I’m walking the road. Enjoyed the commentary especially from your son 😂
@IronMountainPlumbing 10 ай бұрын
Lol yeah he cracks me up. By the way who the heck was Joe Elliot?
@miis05 10 ай бұрын
@@IronMountainPlumbing Joe Elliot was with the Forest Service in charge of the forests in the area. His grand daughter made a comment saying that on Google Maps reviews for Joe Elliot but I couldn’t figure out how to contact her and find out more details. That’s all I know at this time, and that the big tree remains you saw were the Joe Elliot Tree Memorial which was brought down by the forest service for safety. Apparently people were having fires at the base of it and it was deemed unsafe and dynamited down.
@florintudic5093 10 ай бұрын
10000
@ryanteter 11 ай бұрын
This video is missing the cursing, throwing stuff, farting, and general frustration that a guy faces when doing such a project. Please edit all of that stuff back in.
@IronMountainPlumbing 11 ай бұрын
😆 dude no way it was a blast!
@spencerwood-vx9os 11 ай бұрын
How do you like the dobinsons suspension? Is it stiff?
@IronMountainPlumbing 11 ай бұрын
It’s not bad. I don’t have much to compare it to other than my wife’s LX with AHC. The AHC is way more plush. My next setup will be dobinsons IMS.
@hyuui98 Жыл бұрын
What size are you running 295 75 R18?
@IronMountainPlumbing Жыл бұрын
315/75/16
@craigmayer3403 10 ай бұрын
How bad is the rubbing? I have a 98 LX470 with 285 75/16s. Would love the bigger tire but worry about rubbing and the mpg
@IronMountainPlumbing 10 ай бұрын
@@craigmayer3403 definitely have to cut the front bumper, some metal and plastics had to be cut in the wheel well. If done right you can’t notice it but cutting definitely required. If you’re concerned about MPG and feeling even slower then avoid 35’s.
@stefanauto7454 7 ай бұрын
Dużo gorzej przyspiesza? Z tyłu też trzeba było coś podcinać?
@stefanauto7454 7 ай бұрын
Co oznacza mpg przymierzam się do takich opon w mojej hdj100
@miis05 Жыл бұрын
I was talking to another guy and he said he was stopped back before Buck Point by boulders, and you said you saw tracks from a bulldozer and got further than where he was stopped so the road is being worked on, so maybe they will get there and finish the job in the near future. You were so close to Joe Elliot, I have been there so many times and you were within a mile and could have walked there not too far away.
@IronMountainPlumbing Жыл бұрын
Was that other guy me? From my other channel “KJ”. Yeah man hopefully they move it soon before the snow hits. I would not want to drive that little section at Buck Point on ice. It’s too exposed for my liking.
@miis05 Жыл бұрын
@@IronMountainPlumbing yes, it was you then! I didn’t realize you have two channels. Let’s keep our fingers crossed 🤞
@IronMountainPlumbing 10 ай бұрын
Hey! We went up today again and the Boulder was gone! We finally made it all the way to the campsite.
@miis05 10 ай бұрын
@@IronMountainPlumbing that’s awesome! Hope it was everything you have been looking forward to seeing. A friend of mine went up about a month ago and got through too, I want to go back and work more on the trail to Cucamonga Peak.
@IronMountainPlumbing 10 ай бұрын
@@miis05 it was everything and more. I believe we stood on the big tree. It was very large! That campsite is so prime though. A fire pit and everything. I’d love to camp, hike cuc, and come back down. Sounds like an epic time!
@maxturgidson568 Жыл бұрын
Move it
@IronMountainPlumbing Жыл бұрын
Rangers said we couldn’t touch it
@ImportDriver Жыл бұрын
Thanks for taking the time to film that. Very helpful!
@IronMountainPlumbing Жыл бұрын
My pleasure! It was fun!
@tynado1173 Жыл бұрын
Hey man thanks for making the video. Just getting ready to order some myself. How are they holding up? Do they seal the window as well as the original? Thanks!
@IronMountainPlumbing Жыл бұрын
Yep they look OEM and they’ve held up great so far. They sit in the sun all day too. Time will tell!
@tynado1173 Жыл бұрын
Awesome thank you for the response!
@DuanDao Жыл бұрын
Good start to your build. Who is this guy from Pakistani? Got a contact?
@IronMountainPlumbing Жыл бұрын
I’ll get his email and send it to you.
@DuanDao Жыл бұрын
@@IronMountainPlumbing appreciate it
@IronMountainPlumbing Жыл бұрын
@@DuanDao [email protected]
@DuanDao Жыл бұрын
@@IronMountainPlumbing thank you
@IronMountainPlumbing Жыл бұрын
@@DuanDao no prob! Hes also on Facebook. That’s how I originally ran into him
@ddpete1563 Жыл бұрын
I run 285/75/17 Nitto Ridge Grapplers with my Dobinson lift.
@IronMountainPlumbing Жыл бұрын
Nice. What wheels?
@ddpete1563 Жыл бұрын
EVO corse Dakar wheels
@florintudic5093 10 ай бұрын
@@IronMountainPlumbing 45100
@sykoslug Жыл бұрын
Nice work. I appreciate the info!!
@IronMountainPlumbing Жыл бұрын
It was a fun learning experience for sure!
@craigjackson2881 Жыл бұрын
Bad ass rig.
@IronMountainPlumbing Жыл бұрын
RAM Mounts RAP-HOL-UN7B-201U X-Grip Phone Holder with Composite Double Socket Arm(Medium) Compatible with RAM B Size 1" Ball Components a.co/d/hpoN70K Yak Attack GTSL90 GearTrac Light/Medium Duty, Black - GTSL90-BK08 a.co/d/6ky4RYw RAM Mounts Track Ball with T-Bolt Attachment RAP-B-354U-TRA1 with B Size 1" Ball a.co/d/6AStB4C
@IronMountainPlumbing Жыл бұрын
www.ebay.com/itm/322564953297?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=4LoaV7M6QcG&sssrc=2349624&ssuid=MoWgxaHmSGO&var=&widget_ver=artemis&media=COPY
@earcamera Жыл бұрын
When I did my actuator motors i used zip ties and a strap gun to leave the clamshell serviceable. Seems to be working well. That paint/coating is wild! Love it.
@IronMountainPlumbing Жыл бұрын
Oh that’s a good idea! I might as well do that on the remaining motors I have to do. Thanks man! The green has been growing on me but I love it.
@omarnic2007 Жыл бұрын
@@IronMountainPlumbing about the what this are/do those bulbs turn on when your lights are on and there is a position that only those are on. I believe is your daytime running lights but your bulb is not working. I have the same type of light but mine is diesel 2001
@IronMountainPlumbing Жыл бұрын
@@omarnic2007 they seem pretty non-functional so I’ve ignored them. For now lol
@IronMountainPlumbing Жыл бұрын
www.ebay.com/itm/374074853647?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ype5qs9yr9g&sssrc=2349624&ssuid=MoWgxaHmSGO&var=&widget_ver=artemis&media=COPY
@tuddrussell 2 жыл бұрын
Did I count 12 locomotives?
@IronMountainPlumbing 2 жыл бұрын
Yes sir!
@craigjackson2881 2 жыл бұрын
Kickin’ arse!
@IronMountainPlumbing 2 жыл бұрын
Yeah buddy!
@craigjackson2881 2 жыл бұрын
DPU Alright!
@craigjackson2881 2 жыл бұрын
Love your train videos!