2 ай бұрын
3 жыл бұрын
Пікірлер
@joshhibschman 3 күн бұрын
wait chevy made 5.3l's as a straight 5 cylinder?
@DavidGurrney7589 Ай бұрын
You did great PS I'm white just kidding 😂😂😂😂 Seriously your very good bro😊😊😊😊
@nevets5891 Ай бұрын
Why paint in an open workshop like that? Toolboxes, doors etc getting over spray. All sorts of crap sticking to the paint. At least wet tge floor to help keep dust down.
@MrKL83 2 ай бұрын
Will this give a P0300 and a P0301?
@paquesepas6696 2 ай бұрын
I thought stuck lifters was caused by bad oil like taking too long between oil changes? I have a gmc 2007 5.3L and my lifter on cylinder 7 got stuck. I have them all out now and will replace all of them. What do you recommend to make sure my afm lifters dont do this again? Im gonna buy a new updated vlom as well. Thank you.
@eligiomeraz0683 2 ай бұрын
You mean pulling the head up not just the intake, cause the lifters are under the head.
@SuperSedingAngeL-yr0 3 ай бұрын
What the hell is that sound?! 😢
@timblue6055 3 ай бұрын
Creamy
@x_DEUS_VULT_x 4 ай бұрын
P0300-P0308 Stuck AFM lifters. And the lifters are under the heads, not the intake. New camshaft and set of lifters. I did so many of these at the dealership during these year model run, I could do the job in my sleep. ASE & GM Certified Heavy Line Chevy dealership technician.
@terrancemcfarland89 3 ай бұрын
Do you have a video or any method I could educate myself on?, I'm looking to do this all on my own I have the infamous lifter tick that really only gets bad when I accelerate
@NuIVIb 3 ай бұрын
What year and vehicle models ?
@NuIVIb 3 ай бұрын
@@terrancemcfarland89what kind of vehicle you have ? & the year
@adandiaz372 Ай бұрын
Hey where are you located @Defiant_Garbage i have the same issue on my 2011 suburban.
@JosephColon-wy1ii 4 ай бұрын
The intake the head the oil pump need swapped
@JuanPacheco. 5 ай бұрын
Good job bro
@chago102 5 ай бұрын
How much
@michaelcastaneda4135 6 ай бұрын
My ford mustang 04 the lifters are easy to get too
@jelanygetmoney6110 6 ай бұрын
Good morning. Will you make a video pulling the intake and undticking the lifter?
@otterchaos666 6 ай бұрын
How much for the repair?
@stevenkleinhenz1017 6 ай бұрын
Looks to clean and new for failure!
@eliezer18yt44 8 ай бұрын
My 2013 dodge dart turbo 1.4L went off when I was driving and it won’t start again but it’s making the same noises can someone help me please
@osstemtirth4579 9 ай бұрын
I would like to know what that was voice also want to fix it
@eugeliodileone5541 9 ай бұрын
Oil
@Alex-sd6mc 9 ай бұрын
It sucks because I've disabled the AFM in my Tahoe, and I'll still have a collapsed lifter every 100k miles or so. (320k miles currently). It's honestly not a difficult job at all. It's just a lot of steps. That doesn't negate the fact that i hate engineers though for designing the AFM. lol
@CarGuruGalore 9 ай бұрын
It’s the parts, not the program. Just replaced my cam and lifters for none dod, and lemme tell you, it’s def not a 32hour job. More like 2 months
@Alex-sd6mc 9 ай бұрын
@@CarGuruGalore luckily my cam is in great shape. THE MOMENT I hear lifter noise or any valvetrain noise, I go ahead and remove the head and replace it all before causing damage further down. I know it's not necessary but I enjoy the process. Takes me about 7 hours. I've never replaced a cam before so I'd assume that would be a much bigger puzzle to solve.
@CarGuruGalore 9 ай бұрын
@@Alex-sd6mc 7 hours to replace heads is god tier
@Alex-sd6mc 9 ай бұрын
@@CarGuruGalore thank you! It's like a puzzle for me. Once I did it the first time, it's something I can just blaze through now. I'm still learning, but once I figure out how to take something apart and put it back together, it becomes thoughtless clockwork.
@MOE13576 6 ай бұрын
Why 2 months?@@CarGuruGalore
@ALCRAN2010 10 ай бұрын
It helps ton know what year this is.
@workct4102 10 ай бұрын
Engine looks clean at least
@ACM1PTLOCO 10 ай бұрын
Reminds me a wankel engine 😅
@Kemari101 10 ай бұрын
Now, my next question is, does it work for a 95 Chevy impala cause they saying you have low compression on that too
@Kemari101 10 ай бұрын
I totally appreciate that bro. It actually works.😊
@noahsumner1621 10 ай бұрын
How did you get the top passenger side bellhousing bolt out? Trying to take mine out.
@mikep490 11 ай бұрын
Yes an excellent post. Multi-air is used in the 1.4L Dart and many later small FCA (now Stellantis) cars and that is priming the "Brick". This procedure is explained in the owner's manual and can happen if the car sits for a while. The Brick uses oil pressure and electric solenoids to open the intake valves. It can sometimes take many tries and some people remove the oil filter, press gently on the bypass valve, and crank until oil comes up. That method is shown in Fiat 500 vids. Sometimes there can still be some air trapped and the car can run rough for a while so you might want to shut off and restart. As you explained, make sure to do this with a battery at 12.4V or higher or the electronics might not work.
@schlick93ify 11 ай бұрын
My 2010 Silverado 4.8l just developed a lifter issue, it’s got the P0301 cylinder #1 misfire code, I just paid the truck off, I got the truck with 90k miles it’s got 190k now so I paid all that money for a truck that only lasted me a 100k miles I’m so pissed! I never owned a vehicle that developed major engine issues this is the 1st, I’m a Chevy guy but they ripped me off on this truck so they just lost a customer I’m getting a Toyota tundra f*ck Chevy there junk now!
@tyrellmyles4132 10 ай бұрын
I literally Just paid my truck off and this happened to me as well, I’m currently fixing I lol
@schlick93ify 10 ай бұрын
@@tyrellmyles4132 it sucks man I’m to busy working this is my auto glass truck I have a business to run I don’t have time to be taking my motor apart to fix it when it shouldn’t be having this issue in the 1st place, it’s going to cost me a lot of money bro! I’m thinking about getting a stage 2 cam & lifter kit it comes with everything gaskets & all, I’ll just have to pay my buddy $150 to tune it for me.
@dayday1744 10 ай бұрын
Read this assuming you were a woman! It’ll be alright buddy.
@kadihedrick3850 8 ай бұрын
Or just fix it what the fuck😂
@tyrellmyles4132 8 ай бұрын
Lifter*
@schlick93ify 11 ай бұрын
😂
@rubenvasquez021 11 ай бұрын
Let me finish what he forgot to mention you cannot access the lifter by just pulling the intake the heads have to come off and and if it’s an AFM have to replace it with the same kind of lifter people will mistake a misfire code with a collapsed lifter
@gordocarbo 6 ай бұрын
One huge design flaw of the LS. Pain in the arse
@montewestlund8880 11 ай бұрын
Chevy start to make junk just like Ford. Time to start boycotting Chevy too.
@gordocarbo 6 ай бұрын
It the EPA all mfrs are having to come up wiht goofy valvetiming systems to make them happy. If I werent in Ca Id buy a late model truck, get rid of the AFM system and drive it a few hundred thou like my 02
@SrColon309 Жыл бұрын
The problem was the battery that needed more power.
@ricktotz4078 Жыл бұрын
And people still buy the crap
@Godsoldier Жыл бұрын
oh man i wish i check that before removing it, what was the engine doing? was it having a miss fire and no compression, that's what's going on with mine with the same cylinder, i just post it a reel on it, makes me want to put it back and check, I'm replacing it.
@rubenvasquez021 11 ай бұрын
Those afm lifter when they fail will through a misfire code cylinders 1,7,4,6 those are know to fail first year that came out believe was 2008
@hislove4me3 Жыл бұрын
Where are you located
@gordocarbo 6 ай бұрын
Over there
@jeffholliday9205 Жыл бұрын
Could have split two about an inch or 2 and went around with a wrench!
@elmeromero3578 Жыл бұрын
Head is coming out soon
@gordocarbo 6 ай бұрын
No way around it. Head gaskets are probably old and crusty anyways
@cesarconh895 Жыл бұрын
Warning: you cannot access the lifters by taking the intake off 😂. Not on this engine by the way
@Ghost-vr5zg Жыл бұрын
pull the whole intake, then the heads, but first break a few exhaust manifold studs
@slycarlo8747 Жыл бұрын
Yes but you can use a punch down the oil passage to the lifter to release it.
@aaronzavala4336 11 ай бұрын
I had a question I’m not getting oil to come out to my lifters while I’m cranking my 5.3
@workct4102 10 ай бұрын
That's ridiculous!
@gordocarbo 6 ай бұрын
@@Ghost-vr5zg Thats mandatory! PLus a few pigtails and the plastic vaccum lines.
@Dmkpit401 Жыл бұрын
good shit man im not a mechanic but i been working on cars 25yrs, and my first thought would have been timing belt, ive built few engines well complete cars but never egg beaters like these, i have a locked up dart i just bought seeing if i can bt reak it free , it rotates 70% then locked 70% backwards locked, som started looking to see if vvt could do it too, a girl went in puddle i drained gallon of water and flushed gallon oil threw it and let ATF sit on pistons over night with plugs out to see if i cant save it
@SuperSedingAngeL-yr0 3 ай бұрын
What's an egg beater mean in this context?
@JM-lk6wo Жыл бұрын
The failure must be due to AFM, not one of GM's best ideas.
@schlick93ify 11 ай бұрын
My 4.8l doesn’t have AFM & it developed the same lifter issue as the AFM motor
@nates9353 10 ай бұрын
@@schlick93ifyhow did you fix it?
@eleazararriaga3349 6 ай бұрын
@@schlick93ifywhat year ?
@schlick93ify 6 ай бұрын
@@nates9353 I didn’t fix it I bought another truck & parked the Silverado for awhile until I have time to fix it, mines a 2010 Chevy Silverado 1500 with the 4.8l V8 motor, but there is a trick you can try, try using automatic transmission fluid, get the stuff for import cars it’s got cleaners in it that clean the lifters & if your lucky it will clean it enough to get it to work again, I was f so lucky I tried the automatic transmission fluid but it didn’t unstick my lifter, but a friend of mine tried the transmission fluid trick & it got his lifter working again he’s still driving his truck, now he adds a quart of transmission fluid at every oil change, instead of 6 quarts of oil he does 5 quart of oil & a quart of automatic transmission fluid, I’m not going to fix my motor I’m getting a rebuild motor for my motor plus $2500!
@gordocarbo 6 ай бұрын
@@schlick93ify How many miles?
@jaidenlewison6953 Жыл бұрын
Can I do this on my 5.3 Tahoe? Is it hard to inspect ?
@gordocarbo 6 ай бұрын
Heads come off to replace lifters. Use a new GM tray when you do...not aftermarket
@kapethybridge9509 Жыл бұрын
I have a 2013 dodge dart sxt 1.4 turbo I lost compression in cylinder 1 any ideas
@SrColon309 Жыл бұрын
You have problems with the multiair system, seek advice on what I'm talking about.
@mtsanchez27 Жыл бұрын
Would it be the same issue on a 2.0l engine 2013 Dodge dart?
@battousaix1234 Жыл бұрын
Yes
@mtsanchez27 Жыл бұрын
@@battousaix1234thanks for replying!!
@handyvoice3943 Жыл бұрын
hey man great video, my van today cut out at cruising at 60mph on the motorway, when i tried restarting it it made that sound so i called the recoery ppl and they will bring it home later , im wondering if i try this if it may start ?!!
@Familyrootsllc Жыл бұрын
I’d like to know what that was I have the same sound
@ckinney76 Жыл бұрын
Worked like a Champ, You the shit!!
@AngelMiguel3280 Жыл бұрын
Thanks for this video I was about to pull out the car Engine, …
@noahali206 2 жыл бұрын
You don’t think giving the battery a extra boost is what started it
@abee3515 2 жыл бұрын
no the car is multi air the intake valves are actuated by hydrolic pressure- the block that holds and sends the fluid into the actuators when one of these engines sits for any significant period of time without being started the multi air block drains that fluid out and the car wont start. What he did by holding the pedal to the floor is bypassed the fuel system so it wouldn't flood the cylinders. By turning the engine over several times it builds the fluid back into the multi air box allowing the valve system to work properly. The last time he left his foot off the gas which allowed the fuel system to work and it started. It sounded to me like one of the valves is sticking possibly from the emptying of the multi air block but I'm not sure that's for another video.
@timcameron7371 2 жыл бұрын
So is this a "Dry" start? Like no oil? Thats what it sounds like after it finally turns over. .....sounds like shit.
@Martianj88 2 жыл бұрын
Question , the same thing is happening to my car except it has a blinking check engine light, is that normal to happen during this situation or is that worse?
@fanfare466 2 жыл бұрын
Normal..
@Acidburn3141 2 жыл бұрын
Bad
@Martianj88 2 жыл бұрын
@@Acidburn3141 yeah I sold it to a junkyard ,