That's really exciting, you'll have to let us know how it turns out! What color(s) did you choose to go with?

You can use the J Channel as the starter piece for installing vertically.

@@QualityEdge Thank you very much for answering me

Thank you for that feedback as it helps us to improve our content for you!

"When cutting steel siding a ferrous cutting blade must be used. A carbide tip saw blade with the max number of teeth per the diameter of the blade. Cutting thin steel requires lots of teeth on the saw blade. Never use a grinder or an abrasive type of saw. Failure to do this may damage the protective finish applied to the siding and void the warranty. Always make sure to wear protective safety glasses and gloves when cutting/handling steel siding. Follow safety instructions that accompany your tools/blades and wear the suggested protective gear." Here is a link to our Installation Guide: d1xlilmgcz8o42.cloudfront.net/resources/Installation/VIGEN1022.pdf

It can be installed vertically, but we recommend an eave above due to the design.

Actually we test against wind, fire and hail ratings and we receive top scores. Our weep holes allow any water that may get behind the panel to move down and away from the home or evaporate. Steel offers a premium solution, but with our lifetime warranty including chalk and fade many homeowners feel it's one of the best values on the market. Thanks for the comment.

Get rekt

Not today.

I can ship to Europe it will be a bit more for shipping.

Cant

Furring Strips, I'd Imagine

Great question, is there a specific type of exterior insulation you need an explanation for?

@@QualityEdge buildblock icf

Please make a video How can be installed over insulation. Thank you

I would like to know the same - can't find it on their website

Vesta 5" Planks are steel siding.

Hi David, we'd love to assist with connecting you with a local distributor for pricing. Could you fill out the form at the link below, including your location. And we will have a representative reach out to you. www.qualityedge.com/contact/

@@QualityEdge Yes, thank you. I submitted the question.

We sell through distributors and would be glad to connect you. Please contact me at [email protected] and I am glad to assist you further or call Customer Service at 888.784.0878. Thank you!

The are .42 mesh, .440 micron mesh panels made out of strong surgical grade stainless steel that handle 60 gallons of water per linear foot.

These are the Quality Edge Gutter Gekko 5" Fascia Mount Micro Mesh Panels.

Can you link to the product? Not finding it online.

The G Channel can be located at a distributor in your area. Please call our Customer Service team for more information. 888.784.0878

Opening is driftwood

This was demonstrated using our Ironstone color.

This is our Ironstone 414. Our Coal 463 is much darker and almost black. Thank you for asking!

Since you said you have worked with steel sidings a lot, what do you think about steel sidings? I heard it’s really loud when it heats up in the summer, is it true?

@@King-2077 Back when Alside was owned by US Steel I worked a lot of brown steel siding. It got real hot. Average steel siding has PVC as the color while other brands use the type of paint used on steel roofing. The PVC absorbs the suns heat while the roofing kind of paint reflects the suns rays. I've seen my share of vinyl siding melt. I'd prefer Hardy board but being a cement product expands and contracts like nothing else. My biggest complaint with steel is the PVC coming off and how Gentek carelessly comes and paints what's peeling and leaving the mess. The manufactures have priced steel siding to where a valid conversation to go with brick should be considered. Every other month I get notice that steel siding and its accessories are going up 12-15% and brick is forever. I try to stay as close to gutter work and stay away from an unstable siding industry. During the Soetoro years I watched as small siding manufactures were gobbled up by bigger corporations and a lot of products were deleted meaning not available.

Nothing wrong with Midwest snips, they work better than m2000's any steel heavier that 29g

Thanks for the inquiry. We offer h-mold to our customers who have contractor needs in their area it supports. Because we provide specific products across the US and Canada, many specialized products are unique to a region or area based on code or preference. If you'd like additional information I'd be happy to send some your way to learn more.

@@QualityEdge With a little searching these were found and ordered. Code in this area is not a problem. My hardie plank siding is buckled. Wind lifts and separates, and creates water intrusion. Like I said, seems like a great idea. Thanks for the response.

@@keachmister Okay guys... very nice conversation, but can you both please SHARE? Who makes the H-Molding that fits Hardie Siding and is even color matched as shown? How about SKU numbers, web-links, something? Thanks

@@FirstClass- if you give me a week until I get back to them I can maybe give you a SKU number in the meantime I found them at Meynards and had them shipped without too much trouble give it a try.

@@keachmister Thanks!

Thanks for the note. For demonstration purposes we did not do a vapor barrier on the wall, but do recommend one for actual installations.