Would have been nice to put it to use to see how it works. More important than doing what anybody can figure out already.
@bissellcommercialcustomers41007 күн бұрын
We appreciate your input! But the use of the product was not the issue we needed to address with this video. Do we need to provide a demonstration video for you?-Amanda S.
@NjoyArtStudio15 күн бұрын
I can't thank you enough! Great video!❤ Side note...thank you for NOT overtalking!
@venuscruz349716 күн бұрын
Mine smells like it's burning 🙃🙃what would that be??
@miketubeu20 күн бұрын
I have a machine where the flow indicator is intermittent while using but machine still sprays! I raised the machine onto a work bench, the spray pattern looks weird/inconsistent coming out of the machine. I performed the test in the video, looking for looking for a spray of six to eight inches high, failed barley comes out. I sent the machine back to Bissell for repair telling them about the intermittent flow indicator spinning but not the results of the flow indicator per your video. Sadly, Bissell was unable to find anything wrong with my machine and returned said machine. I sent back a video to Bissell on the lack of Flow coming out of the port, they replied to use the machine, which tells me that your test is inconclusive. I asked for a gallons per minute since it would be hard to test PSI of said pump, again same response use the machine. Not happy to say the least...
@bissellcommercialcustomers410018 күн бұрын
@miketubeu - Please call us at 800-242-1378, ext. 2180 and we will be more than happy to see if we can alter your current situation with the carpet extractor!-Bissell Commercial Customer Service
@MsZenJennАй бұрын
Please, HELP: I've changed all three components. No leaks. Vacuum is fine. I was distracted & in a hurry the last time it was working & used powdered cleaner. **Is it possible the 'small hoses' may have been clogged preventing flow? Water doesn't seem to be making it to the new flow indicator. Thank you
@bissellcommercialcustomers4100Ай бұрын
That is absolutely a possibility! If you are on the phone or in person with me, I ask that the spray be checked at each point along the spray path: tube before it joins to flow indicator spraying? If yes, disconnect from the other side of the flow indicator-spray? If yes, keep going down to the solenoid valve and try it there. This should identify where the spray id being "dropped". Sometimes this process helps identify a bad part too along the path.-Amanda S.
@emanuelciobanu4877Ай бұрын
My brush not turn off, what can i do?
@williamwinn948Ай бұрын
Just bought the newer version and i love it.
@bv6542 ай бұрын
The same plastic hose just like on the 2191
@JIZ2152 ай бұрын
Thank you !!!!
@MarcoAntonio-ge9wi2 ай бұрын
Excellent video, thank you very much for the help. By the way, how many bars of water pressure does the pump have?
@bissellcommercialcustomers41002 ай бұрын
The pumps are rated not in bars but in psi (pounds per square inch). The pumps on these units are rated at 26 psi.-Amanda S.
@deejaymikeskillz2 ай бұрын
You wouldnt happen to have a spare Foot Motor bushing you could sell me? (3:48 in video). I accidently threw mine away with the old corroded foot motor. And there isnt a seperate part number for that. I cant find it anywhere! Please help!
@bissellcommercialcustomers41002 ай бұрын
Unfortunately, it is not an available part for replacement. Hence the reason I made certain my Technician tells you to keep it for the new motor.-Amanda S.
@deejaymikeskillz2 ай бұрын
@@bissellcommercialcustomers4100 thank you for the response. I actually used my brain (haha) and took some measurements and designed one and 3D printed it! Works great. I think it's pretty crazy how Bissell has every other piece available and shown on the illustrated parts diagram, except that one piece ! Thank you again for your response 😁
@bissellcommercialcustomers41002 ай бұрын
@@deejaymikeskillz And this is how you get it done! I'm so proud of your ingenuity!-Amanda S.
@KatelynAnderson-z6uАй бұрын
@@deejaymikeskillz Wondering if you had the blueprints for your 3D printed model? Ours is quite shredded so not able to get accurate measurements, thank you in advance!
@Aquahutch7022 ай бұрын
Alright, well my solution is flowing freely without me squeezing the trigger, so it sounds like my solenoid valve is stuck open. Thanks, that puts me in a direction to go
@lovesjesusmysavior37483 ай бұрын
Thank you. I'm going to try again keeping it straight as possible. 😊
@annacoats29883 ай бұрын
Thanks for this video.
@TheSonOfSammyTerry3 ай бұрын
Maybe point the camera at something useful?
@TheOriginalMrBadaBing4 ай бұрын
Thank you for putting this together - straightforward, easy to follow, solved my problem.
@jorgeespinoza70864 ай бұрын
I just bought one yesterday and it was working fine now it won’t spray or flow indicator spins I can’t find any video explaining whats the problem. Please help thanks.
@bissellcommercialcustomers41004 ай бұрын
Are you using the machine with or without the hose attachment?-Amanda S.
@ingridlandinezlara39124 ай бұрын
HolA. Mi maquina aspira pero tengo q presionar la parte de adelante para q recoja bien el agua q seria lo q se le daño?
@ingridlandinezlara39124 ай бұрын
Hola. Mi maquina no me quiwre aspirar bien en la parte de adelante. Tengo q presionarlla hacia abajo para q lo pueda hacer m que sera gracias 1
@aildefonso8084 ай бұрын
Question, my problem is water leaking at the suction cap next to the flow indicator as soon as button is turned on$ any solution ?
@bissellcommercialcustomers41004 ай бұрын
As explained in the video, this is a direct indicator that your flow indicator has failed. That is not a suction cap, it is a diversionary port for the hose/tool combination with a self-sealing gasket inside that is a part of the flow indicator. If water is escaping from that port, the flow indicator in its entirety has failed-Amanda S.
@stephaniek291314 күн бұрын
I'm afraid to get shocked pushing something into the hole while machine is running!
@stephaniek291314 күн бұрын
So on mine, the water is pouring out from the flow indicator cover itself, not the open white cap hole next to it. Same failure? A frozen flow indicator?
@ibartels4 ай бұрын
I don't get suction out of the tube/brush attachment either - would this make any difference in that case?
@bissellcommercialcustomers41004 ай бұрын
Because the hose is a separate piece, the answer is not. This area is not the problem. You will need to thoroughly clean your hose and tool, removing anything from both that might prevent appropriate working order.-Amanda S.
@FacilityFleetAEA4 ай бұрын
Hi i need to replace the solenoid valve on my Bissell where can i get it?
@bissellcommercialcustomers41004 ай бұрын
You are looking for part #2037436. It can be obtained through different locations, but you can also call us at 800-242-1378 and ask for the Sales Department. They will gladly assist you!-Amanda S.
@swiftice55 ай бұрын
Thanks fixed it!
@Jimbo501355 ай бұрын
Should the solution spin wheel indicator always be spinning when on or only when trigger is depressed?
@brianperry86845 ай бұрын
where do you get the hose?
@bissellcommercialcustomers41005 ай бұрын
You can obtain this hose through many different sources. You are looking for part #2037905 and you can call us at 800-242-1378 and ask for our Sales Department-Amanda S.
@TheReal0necrown5 ай бұрын
Where I buy the replacement from ..?
@bissellcommercialcustomers41005 ай бұрын
You can call us at 800-242-1378 and have a credit card ready, or you can simply do an online search for "solenoid valve part #2037436" and you will find several choices from which you can purchase the part. Thanks for watching!-Amanda S.
@ayannahicks84755 ай бұрын
What if the flow indicator is spinning but the lever isn't being pushed?
@bissellcommercialcustomers41005 ай бұрын
Then the flow indicator is bad and will also need replacing.-Amanda S.
@swiftice56 ай бұрын
Thank you so much, problem is fixed. You rock!! 😊
@greglambert17586 ай бұрын
Excellent video Ms J 👍
@Desideratapoem6 ай бұрын
How do I tell if my Bissels problem is the Foot Motor or the Vacuum Motor? What does the Foot Motor do?
@tuanas4586 ай бұрын
how much is the mtor?
@bissellcommercialcustomers41006 ай бұрын
The foot motor, part #2037431, is available through many different authorized retailers. Search by the part number and you will have choices. Just remember to keep your gray bushing from your foot motor for the new one!-Amanda S.
@derellscott66956 ай бұрын
Do you recommend this vacuum?
@bissellcommercialcustomers41006 ай бұрын
@derellscott6695-Thank you for the inquiry! As this vacuum is an industry standard design, I do recommend this vacuum for customers that want a straightforward, no frills vacuum! It has one purpose in its life and that is to get the dirt off of the floor :) But, please make sure you keep belts (BG-23) on hand. They are the only "consumable good" on these machines as the dirt passes the belt as it enters the vacuum.-Amanda S., Customer Service
@derellscott66956 ай бұрын
Ok I'm probably going to buy this on bissell commercial website.
@bissellcommercialcustomers41006 ай бұрын
@@derellscott6695 We will be here and ready to support you should you need us for any reason during or after your purchase!-Amanda S.
@derellscott66956 ай бұрын
I do have a question.What's the difference between the Bissell bgu8000 and the bgu8500 vacuum?
@bissellcommercialcustomers41006 ай бұрын
@@derellscott6695-The biggest difference between the BGU8000 and the BGU8500 is that we are still manufacturing and selling the BGU8000. The BGU8500 has been discontinued-Amanda S.
@johnwhite66676 ай бұрын
Does anyone know of a multi-surface brush that can be used with this vacuum? We are a small cleaning company and aren't comfortable using this brush on hardwood floors. Any help would be great.
@johnwhite66676 ай бұрын
Does anyone know a good hard surface floor attachment for these vacuums?
@StampwithGailsu6 ай бұрын
I have to say that the floor brushes bleed brown. I had to soak them to get more color out of them and still have brown suds on my floor.
@bissellcommercialcustomers41006 ай бұрын
@StampwithGailsu - This is the first time I have had this reported and I am needing some details if you would be so kind as to provide them! Are you referencing the brown (natural fiber) brushes? And what solution are you using on the floor/brushes? We are only asking so that we might be able to recreate during a test scenario for you and any other future customers.-Amanda S.
@greglambert17586 ай бұрын
Great video👍
@شركةالاماملتنظيفسجادالمساجد6 ай бұрын
ممكن رقم تليفون للتواصل ❤❤
@dixirkt7 ай бұрын
Perfect! Thanks a lot
@dougmcfee83517 ай бұрын
Excellent video, very well done
@thofli7 ай бұрын
Thank you! This fixed my BG cleaner. Excellent video!
@bissellcommercialcustomers41007 ай бұрын
We are vey glad to have been able to assist you!-Amanda S.
@greglambert17587 ай бұрын
Awesome video !
@bissellcommercialcustomers41007 ай бұрын
Your feedback is the one we look for! You taught me what I know!-Amanda S.
@billtmarchi43208 ай бұрын
Thanks for the video.
@jacksonsworld90758 ай бұрын
Isn’t this just a green power force bagged? What’s the difference? Is it more durable?
@bissellcommercialcustomers41008 ай бұрын
This is, indeed, a commercial version of the extremely popular Powerforce vacuum. It has been adapted to meet OSHA standards for use in the workplace. The machine is built to endure every day usage in a high volume environment (hotels, medical facilities, etc.)-Bissell Commercial Customer Service
@LaLa-mw4xb9 ай бұрын
Jesus Loves you ❤️
@maryjuanarasta92209 ай бұрын
My flow indicator is not spinning nor is the brush and i cant spray water from the bottom. What can be the issue?
@JakeTylenol9 ай бұрын
Thanks
@jbt89229 ай бұрын
You are just the nicest person. You explain everything nicely. I am sure your customers appreciate you so much.
@drewmoorefield587510 ай бұрын
Brand new out of box mine isn’t work. Flow indicator not moving at all. Tried pushing the gasket down. Nothing. It’s not leaking. The vacuum motor turns on. When I pull the handle down you can hear it turn on but that’s it. Water isn’t spraying and it loses suction
@dpe28187 ай бұрын
Did you figure it out or just return and exchanged for a new one?
@CVRCI10 ай бұрын
Would this machine clean tile and grout?
@CVRCI10 ай бұрын
Would this unit also work to clean tile and grout?