Every video makes so easy, but there was someone they all left out. Its that metal slide where is connects to a rubber tab that holds it away from drive shaft and muffler. Thank u for this video.
@MasticPlasticАй бұрын
Still listening to it in 2024
@jezreeljamesmanrique67242 ай бұрын
Hope u make a video by pulling the wire.
@MarianoGarcia-em3nt3 ай бұрын
10 years later and you saved me from a hard time 🤣
@TitsMcGeester4 ай бұрын
Thanks Kermit
@UnicycleWheelie4 ай бұрын
Anytime 😂
@jchalmers28jc4 ай бұрын
Hi there my cars running fine but has check engine light on and code is p0134 o2 sensor no activity. Has no cat and when I check this connection there’s no resistor do you think this mod would help my 05 wrx thanks
@UnicycleWheelie4 ай бұрын
It should work, one way to find out :P
@joefazio22585 ай бұрын
awesome!! This exact fix didn't work, but it was the right location to fix it. I suppose it probably depends on the scenario. In my situation, increasing brightness made the noise worse, but i was already at 87%. So i went the opposite direction and turned brightness down. The noise got more silent the lower I went. If you have same situation as me, you just need to go as low as the noise is tolerable. I didn't notice the noise at around 40%, which the screen was noticeably darker, it wasnt so dark the screen was unusable. Didn't impact me at all. Actually got used to it. The darker screen is MUUUUCH better than the screaming buzzing noise. Thanks for the video. Helped me solve my problem 10 years later!!! my monitor was an acer V223w.
@Primatesight6 ай бұрын
Meet me is gay
@MedPaz6 ай бұрын
How do I put that clip back 1:20
@UnicycleWheelie6 ай бұрын
For the air intake clip, I used needle-nose pliers
@devongrant10768 ай бұрын
what size socket did you use to remove the ignition coils 2:25
@UnicycleWheelie8 ай бұрын
E10 socket
@devongrant10768 ай бұрын
@@UnicycleWheelie do you use the same size to remove the spark plug itself?
@UnicycleWheelie8 ай бұрын
Need a 14mm deep 12pt thin wall socket. I used Part # 22814 SKU # 814164 from AuroZone @@devongrant1076
@C435I8 ай бұрын
Good video
@C435I8 ай бұрын
Doing the coil pack n plugs on my c300 right now
@Plush.youtube9 ай бұрын
I have one do you know how to put games on there
@GOMD7710 ай бұрын
when you order these from website does it matter if i choose 2022 mt09 or the mt09 sp? since they don't have xsr900 listed
@UnicycleWheelie10 ай бұрын
My friend bought the exhaust, and that is his bike in the video, I will try and get the model number from him
@Npua_Peb10 ай бұрын
Why didn’t you show up all the steps but I guess it is what it is
@steven_me_gustan_las_casio11 ай бұрын
¿for laidies?
@UnicycleWheelie11 ай бұрын
Fits both Guys/Girls
@neverenough7812 Жыл бұрын
Are you happy with it? To loud ?
@UnicycleWheelie Жыл бұрын
It's my friends bike, he kept the DB killer in, and it sounds good, will try to get more clips with the DB killer in
@rugpull500 Жыл бұрын
I like how they make u take apart the whole car just to do a simple job gotta love Mercedes
@larryreno82933 ай бұрын
What? This is easy compared to many other manufacturers.
@bobkovach14262 ай бұрын
Dude, you do this at 100K miles...no biggie.
@pabloavila7162 Жыл бұрын
friend I have 0156. 2012.0615.1908 is compatible with gtx 1650?
@UnicycleWheelie Жыл бұрын
I sold the rig, so I have no way of testing, sorry...
@pabloavila7162 Жыл бұрын
@@UnicycleWheelie Would it also work with gtx 1650 gddr6 6 pin or is it only for the gddr5 version without 6 pin?
@danielchmura6245 Жыл бұрын
This video is so trash
@user-hd7jc2kr8j Жыл бұрын
Love ur video bro I got a 86cc roketa I don't know where the clutch location at
@UnicycleWheelie Жыл бұрын
Some dirtbikes have a semi auto clutch, just let off the gas and shift up or down...no clutch lever
@MikeFico998 Жыл бұрын
What a POS nightmare this job is
@pheflin526 Жыл бұрын
And what if this doesn’t work?
@UnicycleWheelie Жыл бұрын
Then there is another issue to find
@rforracing Жыл бұрын
LOL such a nightmare changing spark plugs on this engine.
@UnicycleWheelie Жыл бұрын
Yeah tell me about it, on my Honda fit, it was a cake walk lol
@mymemories925 Жыл бұрын
My bmw 330e 02 sensor upstream black connector clip, one of the 5 pins has snapped off when pushing it back in? Will it still run or send a fault code?
@JosephSirard Жыл бұрын
Could this device get ruined or recordings erased if it happen to end up in a pocket next to a magnet on a wallet???
@slidin5672 Жыл бұрын
Good video my guy thinking of doing it myself instead of taking it to a shop! My only concern is do you have to torque the new spark plugs to a certain lb?? And do you have to change the coil packs also or can you just do the spark plugs?
@UnicycleWheelie Жыл бұрын
Depends on the miles, my car had 60k, 23 Nm/17 ft.-lbs. on the plugs. 9 Nm for the coil pack bolts....NGK recommends a torque range of 18 ft-lbs to 21.6 ft-lbs for their plugs.
@slidin5672 Жыл бұрын
Okay thanks for the response and the lbs to use! I think ima go with the Bosch spark plugs any difference between oem and Bosch or should be good?
@UnicycleWheelie Жыл бұрын
@@slidin5672 OEM have a resistor
@slidin5672 Жыл бұрын
Do you have to disconnect battery when removing the ecu to get to the driver side spark plugs?
@UnicycleWheelie Жыл бұрын
@@slidin5672 I would just to be on the safe side
@pg4221 Жыл бұрын
You should check the review of your phone dude. Your sound SUCKS!
@JohnnyRayBoggs Жыл бұрын
Thank the lord just information only. 🙏 you rock
@angeladavis3977 Жыл бұрын
Great review. Thanks
@reckergamer5247 Жыл бұрын
Dude do u have any kind of AGP GPU like 128mb to 256 mb ? if u have it so tell me :) becuase i need it for my older pc !
@reckergamer5247 Жыл бұрын
Dude that board is good fore i7 3rd gen ! because i wana used it for games right so i confused which is good and better like H 61 and q67cl or bl ?
@UnicycleWheelie Жыл бұрын
If you have a LGA1155 CPU i7, like say a Intel Core i7-3770, GIGABYTE GA-Z77X-UD3H, GIGABYTE GA-Z68A-D3H-B3, the Z is good. B/H are ok, all about how much you want to spend on the MOBO and what ports you want to have, should be around 60-130 bucks, do not get no name boards...
@reckergamer5247 Жыл бұрын
@@UnicycleWheelie so whats the best option for me ! i just wana to ask u brother ! actually my budget is less so what i do now ! select h61 mobo or go for q67cl mobo for intel !
@UnicycleWheelie Жыл бұрын
@@reckergamer5247 The H61/H67 chipset is designed to be entry level, These boards are a basic board that will not allow for overclocking like the K CPU's, Plus side is they let you choose either to use a GPU for graphics (GPU card) or to use the onboard from the CPU (if your CPU has HD grapics) (not good for gaming).You can get a Intel DH67BL for under 50 bucks on ebay that includes shipping. (search 295239235960)
@reckergamer5247 Жыл бұрын
@@UnicycleWheelie dude i have r7 360 and i7 3770 right i just need to chose mobo ! so can i go for dhq67cl ?
@UnicycleWheelie Жыл бұрын
@@reckergamer5247 Yes, its a LGA1155 socket and has 1 PCIe 3.0 at x16
@@UnicycleWheelie vlw amigo atualizei aqui mais não pegou minha placa de vídeo 😞 acho que meu slot pci parou de pegar!
@UnicycleWheelie Жыл бұрын
isso é uma merda meu amigo, espero que a GPU não seja ruim. pode ser uma bios mais recente para o MOBO.
@understandingtruth10 Жыл бұрын
It worked for me just now too with the same board and a rx 480 8gb that would not post thanks, now I have windows 11 on it lol.
@zarrar26 Жыл бұрын
My rx 580 is not working with this board, is this the solution? The pc works fine and there is also the sound on lock screen but no display whatsoever.
@TheOrfil1002 жыл бұрын
Finally a genius no one else explains this part thx bro
@alidi41445 ай бұрын
Exactly
@DA-ql3vt2 жыл бұрын
I just did it without removing the manifold and am glad I didn't go through the extra trouble. That rear plug didn't seem so hard to me. I'm sure watching this video saved me a little time though.
@slidin5672 Жыл бұрын
Do you gotta torque down the new spark plugs?
@moisesperez46594 ай бұрын
Spark plugs are indexed and must be torqued.
@raspberry1440kb2 жыл бұрын
Seems like the card requires UEFI to be enabled
@GreenTRC12 жыл бұрын
Wow! That is a pretty impressive little recording device. 👍 Great review! It's exactly what I was looking for, thank you.😊👍
@user-xh9ql2lw4d2 жыл бұрын
good job friend
@shawnfleming14052 жыл бұрын
I can't hear you I've got it all the way up I know its 2.2 k but which wires what type of video
@hanachubi63612 жыл бұрын
Tried this method with no expectation at all, but it actually worked on my VG240YSb monitor. Thank you so much!!
@inakalimba94282 жыл бұрын
Camera provided a clear view of this engine, only missing the real -time removal of the wiring harness and all it's weird clips. What tools are best for that?
@mirandasmith83862 жыл бұрын
Mine has stopped recording. Do you know what I could have done wrong? I transferred files to my computer and now it won’t record any more.
@UnicycleWheelie2 жыл бұрын
1. Copy all the files in the USB Recorder off onto your computer into a folder, naming it: Recorder Backup. 2. Check to see if you have the following folders: a. SetTime b. Record (if not, please create one) 3. Format the recorder selecting FAT32. 4. Copy all the files inside the Recorder Backup onto the recorder. DO NOT copy the entire folder called Recorder Backup, but rather the contents of this folder. Make sure the 2 folders mentioned in point #2 above are present. 5. Go into the SetTime folder and run the .exe file within the extracted folder. The file name is called SetTime.exe. 6. Physically remove the recorder and use the recorder to record something. 7. After you are finished recording, switch it off and plug it back into a computer. 8. Check the Record folder to see if the recorded file is there. Try playing it back using Windows Media Player or VLC Media Player. Also make sure its getting charged, I use a phone charger.
@mirandasmith83862 жыл бұрын
@@UnicycleWheelie thanks so much!!! It’s back working!!!
@stretchmoneyrico Жыл бұрын
@@UnicycleWheelie het i dont have any of the files mines is completely blank it wont record and i dont have the settime exe
@deez66862 жыл бұрын
Can you make a video of change if brake and rotors
@deez66862 жыл бұрын
Can you make a video of brake and rotors change
@thor2942 жыл бұрын
They have a special tool for that airbox clip it makes life a lot easier
@brassmule2 ай бұрын
It looks like a big Clic-R clamp?
@thor2942 ай бұрын
@@brassmule something like that I forget the name
@brassmule2 ай бұрын
@@thor294 It's definitely a Clic-R, and you're right, the tool for those makes it very easy to unclip and re-clip them. Just did this job on a c350 today and confirmed it.