Jah Right

Пікірлер

@badhabit7379 3 ай бұрын

You can just remove the fuse box and change the blub without pulling out the whole housing ....duh

@jahright2806 3 ай бұрын

Yeah I’ve seen that method too, might be easier for some, but also looks more scary for people.

@adalbertovazquez6194 3 ай бұрын

Wow thanks if i would have went to a mechanic he would have told me to buy the whole front New saved me some bucks 😊

@jahright2806 3 ай бұрын

Glad to be of help!

@johnrobertson7583 4 ай бұрын

Not every damper has A built-in spring to extend it...that affects the coil spring rebound rate...a true unilateral shock only uses valuing based upon the compression and extension qualities you need...

@ednja 5 ай бұрын

I don't know how you got the shock mount bolts out so easy. I've spent hours just getting one out and I bent the shock mount from pounding while stressed out. I'm so stressed out that I feel really sick. What happened is there is a sleeve that the bolt goes through. The bolt was stuck in that sleeve so the sleeve spins with the bolt. I bent the shock mount wider to get my vice grips in there to hold the sleeve, which slowly did work but @#%%^^. I haven't tried the top bolt yet which is much harder to get at. I tried removing the lower bolt on the other side and it's the exact same problem. I'm thinking about using a cut off wheel to cut bolts off but I need to know if I can get replacement bolts. I'm wondering if that sleeve is part of the new shock.

@jahright2806 4 ай бұрын

Yeah check Lowe’s or hardware store for the bolt before you cut it. Penetrating oil spray like PBlaster can help a bit. We sprayed like every other thing with it.

@Justwatching746 7 ай бұрын

I have a 2004 Chevy venture. It makes a sound in the rear whenever we go over any bumps. It also makes the same rattling type noise when going 50 mph or above. I replaced the shocks. The noise improved quite a bit but is still there. I am assuming it’s the coils since shocks were replaced. What type of noise did you guys experience happening when driving?

@rebecaenriquez635 10 ай бұрын

😂

@The_SniperViper 10 ай бұрын

good old Herman

@Texasgalsquad 10 ай бұрын

Wait how do you know that’s his name?

@The_SniperViper 10 ай бұрын

@@Texasgalsquad 🤔

@The_SniperViper 10 ай бұрын

@@Texasgalsquad maybe I'm someone you know

@cameronmarshall9918 Жыл бұрын

Proper

@stevenjohnson8458 Жыл бұрын

Best video ever! Helped out so much because I couldn't really find a video like this and plus your directions were very thorough and direct. Love the humor too😂

@lextmb Жыл бұрын

somebody please tell me can i put rear coil springs from FWD to AWD car ??? in rockauto there only FWD mark....its only 1 website where i can buy parts to europe

@aaronajbird07 Жыл бұрын

Great job I'm try do this in a week or so, very nice video

@purplepigfarms5888 Жыл бұрын

He is fed up with having no hens so is trying a new way to attract ‘em.

@jahright2806 4 ай бұрын

😂😂

@kevinlafayette879 2 жыл бұрын

I believe you bought heavy duty variable rate springs, not standard duty constant rate. Looking at the order page on Rock Auto, it says the heavy duty variable rate spring add 1.5 to inches of height. I am about to do the shocks during my summer vacation, 2004 Silhouette. That hole in the wheel well, is in exactly the same place. Thanks.

@pennytull7578 3 жыл бұрын

Nice job. Thanks

@MrRsv123 3 жыл бұрын

Can't follow this video. Terrible communication.

@vinnyfernandez9929 3 жыл бұрын

Thank you!!

@minnesota-matt 3 жыл бұрын

Thanks brother, got a 04 with 202k all original tranny and motor. Time to fix the shocks.

@mavtay21 3 жыл бұрын

Thanks - saved me a bunch of time - appreciate the info on socket size and location - worked like a charm on my 04

@otm646 3 жыл бұрын

You are doing this the hard way. You don't need to remove the track bar, you don't need to drop the brake line bracket. It doesn't take much with an external spring compressor that you can rent for free at any auto parts store and the coils fall right out, some worn springs can be compressed and pulled out by hand. Same thing on install, even if you use the 2" lift springs commonly available.

@jahright2806 3 жыл бұрын

Great Tip!

@otm646 3 жыл бұрын

@@jahright2806 I just did another one of these. You just need to make sure you don't pull too hard on the parking brake cable as you drop the beam. Nothing else needs to come out besides the shocks.

@garmin1488 3 жыл бұрын

I tried it that way, got the old springs out, couldn't get the new ones in still needed about 2 inches of compression.

@garmin1488 3 жыл бұрын

Great video , however the tighter coils go at the top as per the instructions.

@jahright2806 3 жыл бұрын

These instructions actually said to do it this way. It varies by make. This has been an ongoing debate for several years. So you just do whatever the manufacture says I guess. The general consensus is that it doesn’t actually make any difference. Sometimes the tighter coil is smaller diameter, so they only fit one way.

@gtavballas1434 3 жыл бұрын

i wish i was in the land of cotton old times that are not forgotten. look away, look away, look away dixie land.

@joseavelar3089 4 жыл бұрын

Por qué mi vehículo suena mucho de las llantas traseras me pueden ayudar por favor Gracias

@hassanbalaghi9335 4 жыл бұрын

So loud and so funny I want more videos like this.

@nyancat402 2 жыл бұрын

Yes

@anukaur8846 4 жыл бұрын

"Away Down South In The Land Of Traitors"

@johnland6965 4 жыл бұрын

Soutern pride bro that's all

@lpkzach92fu 4 жыл бұрын

What is the difference for 2003 model? My buddy and I could not get the driver side light assembly off and we feel we have followed every detail with still no luck.

@biggcuz3424 4 жыл бұрын

How do you install the rubber hose that's coming out of the in the rear of the vehicle rubber hoses for the

@jahright2806 4 жыл бұрын

Bigg Cuz which hose?

@cruzzepeda9209 4 жыл бұрын

Wow That's was dixie's awesome LOL Texas southern📝👌😇💪👍

@jahright2806 4 жыл бұрын

Thanks for watching.

@brandennunn9416 4 жыл бұрын

hey buddy were did you put that jack at the the back to lift it up. The spare tire , or some sort of frame part? or was it the hitch?

@Texaca 2 жыл бұрын

12:24 ...it clearly shows, he puts the jack underneath the tow hitch, that's installed on his vehicle.

@ibrahimazawe9405 4 жыл бұрын

3 like 👍

@Esther_Grace 4 жыл бұрын

Dude, you need a haircut.

@jahright2806 4 жыл бұрын

I did cut one... Should I have cut another too?

@Esther_Grace 4 жыл бұрын

This one’s my favorite art video!

@Rev22-21 4 жыл бұрын

Might suggest adjusting your head lights after this job. 😉

@rogerhershberger4149 5 жыл бұрын

Nobody has seen the full transcript

@jahright2806 5 жыл бұрын

Yep, there has to be stuff like phone numbers, and wire codes that must be kept confidential. And naturally it’s a relative term.

@PerryJ1970 5 жыл бұрын

Which way does the Gray cupling need to face. It fell off now I can't seem to screw it in right

@jahright2806 5 жыл бұрын

I think the threads would face towards the front of the vehicle.

@jamesstanley5503 5 жыл бұрын

Thanks for posting your video, Just an FYI for anyone else who may be replacing Venture/ Montana springs. Check your installation instruction with your new variable assist springs, the tighter wound coils should go toward the top not the bottom.

@jahright2806 5 жыл бұрын

Yes some manufacturers say to do it the other way. There is no common practice. I have heard some ways for certain conditions.

@jamesstanley5503 5 жыл бұрын

@@jahright2806 , thanks again for posting the video, it made my spring and shock change much quicker. I originally put my new springs in the way you suggested but after I was all done I found the spring instructions in the bottom of the box.. Ugh!! then I read variable springs install tight coil up.. No big deal just dropped it all back down and flipped them over. Also for anyone else doing this coil change, the rear end will drop completely down without unbolting the stabilizer bar which will save more time..

@aaronajbird07 Жыл бұрын

Well shit I a just did mine and put them tighter wound, face down 😢

@Justwatching746 7 ай бұрын

@@jamesstanley5503I’m considering replacing the coils myself. How hard was it? I already replaced the shocks about 2 months ago.

@jeremykeller2492 5 жыл бұрын

When it said try a hand at huge pancakes I was hoping it would cover the entire griddle. Alas. I was wondering how j'all would do that... Could j'all do banana bread next?

@jahright2806 5 жыл бұрын

With a square griddle... but maybe one could increase the size if they had a bigger spatula.

@marcelovintino7590 5 жыл бұрын

Great video Thank you 👍.

@jahright2806 5 жыл бұрын

You’re welcome, I’m glad it helped!

@ProperGander011 5 жыл бұрын

Ghoulie-ani

@ninjagodzilla6402 5 жыл бұрын

Looks fun.my wife hit something & bent the whole axle!!! Of course she said no way i didnt hit anything lol.but i just replaced the whole axle & calipers ect but i rented a coil spring compresser because ive never done a job like this & it was pretty handy.but i see ur method works just as good.good video