Hey dude, how about you get to the point instead of making an eight minute video with just a bunch of bullshit

Hello, everyone.Is anybody know if I can add a key to C280 using the I?M 508 s I have a working key

Thank you for this video, it save me a ton of money.

This was exactly what I was looking for! Very informative thank you !

I truly truly must say you every time have the correct answer and have help me time and time again…!!!!

I changed my front pads and rear pads at different times. Do I have to change both sensors (front and rear) even though I'm only changing only the front or rear?

BOSS ... PLEASE 🙏 Where is the ml164 horn fuse location or the fuse color or the number... Please 🙏 I beg u respond ASAP❤

Good job 👍 BOSS❤

Is the shoes for the handbrake or the calipler

Please help I have a ML350 2011, 4mactic , had camshafts replaced and everytime I get work done they are not resetting the codes or clearing them it appears these scanners they are using are not true readers, my engine keep coming back on with the same codes or a new code .!! Which is a problem for admission !!

Thanks, my first time doing anything mechanical. Thanks to you I did it with no problems

Hi Please help. I drive a w202 c240, shows bas asr after engine stalls and restarted bas asr stays on and engine runs with no power and idles weird. After a few minutes when restarted bas asr light does not appear and engine sound fine again. I learned to.check my reluctant ring, my abs sensor. And the one under the steering wheel I think it's the brake sensor.

You legf out showing that you need to flush out the water that will still be in the ENGINE BLOCK! not just in the radiator! or you wont empty the whole system out!

BOSS❤... please 🙏 Where is ML164 " Horn fuse" located or what's the fuse color like or number??... please 🙏 help me

Nobody has a video about the amber turn light bulb because the bulb doesn't slide out the hole like the rest

Does it work on sprinter van ? Thanks for everyone who will respond thanks

I replaced both hub with bearing on front end of a CLS 500 all of them are reading sporadically when the car is on and not in motion but the right front has no reading at all. I’ve changed the speed sensor three times. I also tested the plug to the ABS and it’s showing 10+ volts, what voltage should I be receiving from the DC voltage and voltage AC? I no longer have ABS lights on anymore. any suggestions?

Boss u er the best ❤❤

Boss please 🙏 help me with one ISOFT SCANNER

Good 👍 job boss

Sir thank you so much excellent work

Today I watch you r Video 📹 in Germany 🇩🇪 and I repair the brakes At Mercedes Model W208 Year 2001 respeckt for the video and thanks Hello from Croatia 🇭🇷 Germany 🇩🇪 and Europa❤

Where is the crank shaft sensor located on a 2017 Amg gle 43

Thank you🎉

On my Mercedes M-Class 280CDI is all the time full can sameone tell what i need to do pls

My analog is stuck on kmh

On a 2018 C300 4matic, I'm going to follow your exact instructions. Thanks! Could/Should I use a "car memory saver" hooked up to the ODMB2 port to prevent having to reset or relearn anything?

Thanks BOSS, I ALWAYS DON'T WANT TO MISS UR VIDEO ❤😊

I have a 2007 Mercedes clk 350. My transmission would shift from park to drive smoothly and then goingback to park, would get stuck on neutral, sometimes if I pump on the brakes one or two times, it will move back to park, otherwise I have to cut the engine off , for it to move back to park. Any ideas ?. Thanks

This video literally saved my life. Thank you!

1736

Good evening from France, my problem is the same on my SLK R170? It's unbearable!!!

Hi I have mercedes gla 220d 2018. And when car is cold its running smoothly but after 10 to 15 minutes drive my 1st, 2nd and sometimes 3rd gear makes a vibration like tyre is puncture but actually all my tyres are good. When i stopped the car and car is fully stop than car change the gear from 2nd to 1st and i can feel the vibration. I reset the transmission like you showed in the video couple of times but when car get warm it start making this vibration very often and on the same gear like 2nd gear and driving slow i can still feel something stuck under my tyre. Like dugh, dugh, dugh every 2 seconds. But when i drive over 40km car is smooth no vibration or anything. My mechanic recommended to change gear oil. He checked with his computer and there was no fault in the car. What do you think can be the issue?

You just saved me a whole load and from being skinned alive by Mercedes, I have tried to resolve this problem for a whole year and multiple official dealers and key specilaists, yet by spending a few minutes watching this clip, I solved the problem by re syncing the key of my 2011 SLS GW. Thank you!!!

It's aC240.engineis203

just broke the resivor oin my 09 W211 E350 AMG sport. was only doing some minor mx. I've had a lot of cars and have worked on everything from GTRs to 60s Pontiacs Chevy's, and Fords and many newer GM/Ford, Mopar, Tuotas etc. I'm noticing that Mercedes (and most Eropean Luxury brands have engineers who are a special kind of stupid with over engineering the simplilist stuff. while simultaneously under engineering things that should never be there in the 1st place or should have never been considered. like the use of cheap plastics in areas exposed to high heat. C-Clips hidden behind accessories that are already bolted on with multiple bolts or nuts...just silly stuff. OR more to the point they are designed to run up labor cost when taken to the shop.

Do you know where the front sam is located on a mercedes Ml550? Our car got water damage on passenger side

I have a message on my head unit that says "improper connection of parking break lead". When I start the car, as soon as I start moving I hear a grinding noise and the car won't go. After about 2 minutes of this, she starts to move fine and I can drive all day without an issue, until I park and turn off the car. Then I have to go through that again. Any ideas?

Thanks!

Thanks alot ot worked immediately

thank you!

Good morning I want to join KZbin channel the fact is I have a new phone and don't know how to use it yet

I drove my 2006 E-350 while running hot from a busted radiator hose; without realizing it for about 30 minutes and then started having the same problem with my fan staying on with the loud airplane noise. I was told that my computer module needs to be replaced.

How you can start the car if power steering reservoir not hooked up yet ?

Wow!!! Very helpful!!!! Thank you so much

I’ve subscribed to your account but can’t see the full video of this. 🫶🏽

What if I don't have start stop button? The older ones

Help. Warning message with beeping on my 2006 ml350. Message says to release parking brakes, even when not engaged. I checked fluids and pads and all looks good. Please advise thank you.

I would like to ask you something, hopefully you can help me out. Cause I don’t know if this worth fixing and keeping the car or just sell it 😢 My ML350 (09) for some reason when outside in the cold weather or raining sometimes will turn on the ABS, ESP. I’ve been trying to put it on the garage now but it’s getting cold and it already left me on the streets 2 times, sometimes the wheel get like stuck and abs light comes up right after that. I have a check engine but it’s cause the coolant sensor or something like this, I’ve replaced it but the light is still on not sure what could be. I have a video of the situation if you would like to check, the snow is almost here and I’d like to have a reliable car to transport to work and my family.