You shuld turn off main shut off valve for system leave valves open on backflow and just open test cocks
@lisachatham85582 ай бұрын
How do you set it for every 10 days ?
@jorgezepedajr36772 ай бұрын
@@lisachatham8558 hello. I don’t recall exactly. At the days to water section you should be able to hit the right arrow button to get a different set of options through multiple options. I’ll get ahold of one and doublecheck that .
@lisachatham85582 ай бұрын
@@jorgezepedajr3677 I downloaded the manual and figured it out. So I programed it to start at 8 pm and run 20 minutes and 35 minutes later it's still running and says 5 minutes to go. ??
@lisachatham85582 ай бұрын
So it ran 40 minutes instead of 20. This is for avocado trees. So it's not scheduled to run again for 10 days.
@msmae89302 ай бұрын
This was just what I needed. Very clear for a layperson like me. Thanks.
@cjdiaz19912 ай бұрын
My watering times are at 9pm, does anyone know why it runs again around 9:50 on its own? I am also only using the A profile, B and C are off..any help would be appreciated
@jorgezepedajr36772 ай бұрын
@@cjdiaz1991 on program A, are your “ Watering Start Times “ off, aside from the 1st one?
@jackcarter25733 ай бұрын
Thank you for the excellent guide. My power went off, and the lawn suffered. Now I know how to set it myself.
@danpotts50834 ай бұрын
Great video that answered my question about A1 start time running all A Zones in sequence (no need to set an A2 start time if I only want to run my sprinklers once per day).
@TomMorrison-cm1re4 ай бұрын
Jorge was excellent and easy to understand. He went through each step and made it easy to follow his explanation of how-to program the controller. Thank You Jorge.
@masonkulley4 ай бұрын
Excellent video. New home buyer and it was pre set to water everyday. Wanted to change the watering schedule and couldn’t figure it out. This answered all my questions. Had a rain bird before which was more straightforward
@logand14384 ай бұрын
You’re the man Jorge! I just got this model set up and got no instructions on how to use it. Your video was amazing.
@carleicevann5 ай бұрын
Thank you so much for explaining!
@ShishirPaudel-j9s5 ай бұрын
When I'm on "Water Days", there is one more setting on mine, interval and days left. What does it mean and what do I set them to? Interval can be set to 1 - 31 and days left can be set up to 1 number less than the interval. I'm confused.
@jorgezepedajr36775 ай бұрын
@@ShishirPaudel-j9s I’ll go into my controller to double check. I think though, it might mean days left: the number of days before you reach the 30 or 31 day limit , depending on when you have yours set. For instance if mine is 31, I have 16 days left before I reach day 31 if today is the 15th . Again, I’ll double check that for you.
@Ọmọọlọrunmoṣọpẹ79915 ай бұрын
This video is very helpful thank you
@richardhingst5 ай бұрын
My go-to video for my Hunter system. Thank you for doing this. 1 question, when I went to the dial for setting the watering days, it had "A" and "31/30". What do the numbers mean?
@jorgezepedajr36775 ай бұрын
@@richardhingst if I’m not mistaken the 31/30 is on a cycle of 31 days it will water the selected the days every 30 days . I would just hit the left arrow button until you get to the M-Sunday options and select your days as desired. Or you can pick how you’d like the calendar to run and how many days of each days cycle you’d like to water on the original options of 31/30
@richardhingst5 ай бұрын
@@jorgezepedajr3677 thank you!
@pearcleaningconcierge93365 ай бұрын
This was extremely helpful. Great step by step. You saved me so much time. I really appreciate you.
@tkjones755 ай бұрын
Thank you Mr. Zepeda for the video. It was very clear and understandable. You helped me set my sprinkler system correctly and figure out what I was doing wrong and why it was not working. Thank you again!
@FoysalMahmud-vg2qo5 ай бұрын
Very helpful video. But i’m getting 1 issue. Even though when i point on run position, after few minutes it’s showing off. Do you who how can i fix it? Thanks in advance.
@jorgezepedajr36775 ай бұрын
Could be a rain sensor issue . There is a reset button you can press when you remove the bottom cover . Try that .
@cmpineda10356 ай бұрын
Thanks Jorge, straight and to the point. I like it!
@dascribe78576 ай бұрын
Thank you so much. New home owner.
@JLkbd6 ай бұрын
Do I keep it on On? Or Bypass??
@jorgezepedajr36776 ай бұрын
Your call. If you want your system to shut off during rain storms , on . If you want your lawn to get irrigated, whether it rained or not , bypass.
@nickberlin82476 ай бұрын
Thank you! This was super helpful
@OlenMitchell6 ай бұрын
Jorge, excellent tutorial… I’m having problems with my system continuing to go through cycles until I have to just go cut it off manually !
@jorgezepedajr36776 ай бұрын
How many start times do you have? It’s 4 capable but only 1 should be set
@workwithmiller7 ай бұрын
Dude, this video is perfect! No nonsense, straight to the point. Thank you very much!
@nuraelmagbari42047 ай бұрын
Thank you! Finally someone explains how to use this well.
@daltonconner34157 ай бұрын
I have A B and C, so I am not sure if A is on one side of the house and B on the other, and C is in the back or if A covers them all. Thank you.
@yasserhassan66477 ай бұрын
Thanks Jorge for the job well done! In my X2 control the water days showing calender 1-31. Would you please explain to me how i could set up this calender?
@krisvanhees4627 ай бұрын
Super easy video to follow. How do I set a second watering on the same day for each Zone (e.g. water 15 min at 1 a.m. and 15 min at 3:30 a.m.)?
@jorgezepedajr36776 ай бұрын
Add a second start time at your desired time
@Arlind867 ай бұрын
The valves will freeze you didn’t drain anything but the top which is plastic and doesn’t get effected much by freezing. The valves do feeeze and crack
@kimberlyyoung33137 ай бұрын
New homeowner and single mom here and I have been struggling with this for sooo long! Thank you so much for this detailed video.
@anemixinthemix7 ай бұрын
What happens if this doesn't turn off, even with the programming?
@jorgezepedajr36776 ай бұрын
It could be the valve is bad or open manually
@mariosainz9598 ай бұрын
I'm terrible at following written instructions. So Jorge's video on the Hunter x2 was outstanding. It really helped me. I've seen other video's but Jorge's was the best.
@edgargomez94948 ай бұрын
My zone A2 continues to run. Instead of it stopping when it goes to zone 3 it just continues. It stops when all zones are done. What can I do?
@jorgezepedajr36776 ай бұрын
Do you have a master valve or pump ?
@johnsouthworth48218 ай бұрын
Jorge, what an excellent tutorial! Just what I needed for the newly installed Hunter X2. You're a lifesaver. Well done.
@Artmad928 ай бұрын
This is exactly what I was looking for. Thank you!
@EnergyMedicineAlice8 ай бұрын
Nice and quick. Hunter X2 has 6 stations (zones) but you showed how to program 4. How about A5 & A6? thank you.
@qbnmusica8 ай бұрын
We bought a home with a system in place, unknown how long it’s been installed. How do we pair the system with the app?
@rafaelrobles67638 ай бұрын
Muchas gracias, me ha servido de mucho
@kevinegan17708 ай бұрын
Simply explained for most homeowner's systems. One question: the last thing you showed, to just run it now, you pushed the "next" button?
@jorgezepedajr36776 ай бұрын
Yes, to manually run it, press and hold the next arrow button until the screen changes to duration and release
@whowantsit98208 ай бұрын
Awesome video
@asdfasdffdcd8 ай бұрын
so detailed and helpful. Thank you !!!!!!!!!!!!!!!!!
@rammerjammer96978 ай бұрын
Thank you! Now I have to find out why my WiFi disconnected…WiFi stays on Amber, press twice, light just goes off. I think something happened after my app updated.
@JPGwinn9 ай бұрын
why do I get a line through days and not on others....created a schedule on the 18th and the dates have a line through them and it starts on the 21st?
@kdelete49499 ай бұрын
Step 1: Throw out Hunter unit. Step 2: Buy and install a Rachio sprinkler controller and go about your day.
@NicHoneycutt Жыл бұрын
Thank you! Most informative video!
@lemonhds1 Жыл бұрын
Thank you! Finally able to get it working properly.
@zachariamtd5545 Жыл бұрын
Thanks ❤
@Shortstuffw Жыл бұрын
Thank you!
@MKalee Жыл бұрын
Thanks so much!!!!
@shadylanenb Жыл бұрын
Hey! Is there a way I can have my odd numbered zones run on odd numbered days and my even numbered zones run on even days?
@jorgezepedajr3677 Жыл бұрын
Yes you can use program A to set your even number zones and program it to run even number days on days to water and you can use program B to set odd number zones and odd number days to water .
@shadylanenb Жыл бұрын
@@jorgezepedajr3677 I actually realized that and was in the process of programming it. Lol. Thanks for the quick response!
@KyuLee-n8q Жыл бұрын
HOW DO I RESET IT ? The installer has it running A1 -A4, B1-B4 abd C1 to C4 for an hour each!! New house and tried to contact installer but they refuse to return calls!!! I informed the builder of this and NO MANUAL given.
@jorgezepedajr3677 Жыл бұрын
On each program you have to zero them out . If the start times have all 4 start times set on all programs , you’ll have to turn them all off except for the program A- #1 start time .
@KyuLee-n8q Жыл бұрын
But there are different zones for my sprinkler system. Will A1 run all 4 zones?