Hey man I have a Aimpoint Acro for a 90° Reptilia Mount but it’s it’s too low and I’ve been looking for a Acro to Acro riser does that even exist?
@thegungoober46606 күн бұрын
I have never seen anything like that however, you could buy an RMR or Aimpoint Micro 90 mount and get a conversion plate to acro that will raise it up some. Expensive sadly but an option....
@tpfrk89777 күн бұрын
What red dot do you have on the platypus?
@thegungoober46607 күн бұрын
Its an Aimpoint Acro P2
@Tyr1Outfitters8 күн бұрын
Always cool to see our SLS-QD in the wild! Solid video man!
I think I might have the same issue with my set up. I ordered a reptilia mount for my p2 acro, I’m planning on running this in an LWRC ic-spr billet that has a primary arms 6-30x56 scope on a griffin armament gpm 1.47” scope
@thegungoober466013 күн бұрын
Just looking at the size on that windage turret I think you will have some issues.
@John-qt3vt17 күн бұрын
PWS…
@thegungoober466016 күн бұрын
I haven't weighed a PWS long stroke piston bolt carrier. But I would say... probably it is heavier. And even if it isn't, the weight being further forward, even if its the same weight, would be more cumbersome than a DI gun that has it all in the rear. Does the PWS work?? Is it reliable? Almost certainly. Is it more than a DI gun? Enough more to matter? Maybe, maybe not. I do have a PWS ambi lower, and that thing is slick! <3 What do you think about PWS?
@TjForLibertyКүн бұрын
@@thegungoober4660 The PWS carrier is indeed heavier. I own one, and I am looking into a DI system for weight savings, and parts commonality; but still enjoy piston systems also. I was an avid piston rifle aficianado after first getting into rifles around 2011. Around that time, there was a lot of new marketing geared towards piston rifles, and a lot about how internal piston was inferior. Years later, after l began shooting internal pistons (mostly for work) I began to appreciate them. The light weight of the internal pistons, and slim rails, make them compelling. The PWS carrier is heaver, but also the gas tube housing. The PWS rail is also slightly thicker. This does make the weapon slightly heavier in my opinion. The Mod 2 (flagship) has found ways to shed more weight, and is more enjoyable from what I hear. I doubt they are as light as a internal piston rifle. I find myself enjoying the feeling of our work rifles, more than the PWS, but would be glad to have either. I can get you exact weights on the carriers soon.
@user-cm1yo7uq5kАй бұрын
Great job, that isn't easy
@halvey8518Ай бұрын
I hate shooting prone too😂 It’s definitely something I should practice more of
@thegungoober466016 күн бұрын
The prone aint so bad, its the getting down and getting up haha!
@a-t5380Ай бұрын
How do you memorize the sequence
@thegungoober4660Ай бұрын
Its called "Stage Planning" I TRY do it in 4 steps. 1. Find all of the targets 2. Note mandatory positions 3. Figure out the flow 4. Walkthrough and visualize Its the part of these matches that I struggle with the most.
@a-t5380Ай бұрын
@@thegungoober4660 ya it looks hard… good for you. Great content
@Mrsonicslash5Ай бұрын
the holosun eps is a better enclosed optic
@thegungoober4660Ай бұрын
Why is that?
@Mrsonicslash5Ай бұрын
@@thegungoober4660the acro p2 has a lot of qc issues, dust ingress, glass breakages, fogging.
@Mrsonicslash5Ай бұрын
@@thegungoober4660 the p2 has a lot of qc issues, glass breaking, fogging, dust ingress.
@Mrsonicslash5Ай бұрын
@@thegungoober4660 the aimpoint has some serious qc issues
@thegungoober4660Ай бұрын
Oh wow, none of my P2s have done that yet, probably just lucky. I have an EPS on my Beretta M9 and I like it too. The shake awake is really nice to save battery and I think the window size is bigger than the Acro.
@mateuszsosinski1739Ай бұрын
God, i would i love to have a airsoft version of this gun, it sounds sick
@thegungoober4660Ай бұрын
The pistol or the rifle?
@flylowkey3407Ай бұрын
I never got the point of being able to see through the walls. Isn't the point target acquisition?
@thegungoober4660Ай бұрын
Yeah its kinda weird, personally I would prefer it if the walls were not see through. Also I don't like that you get to walk through the stage ahead of time and see the whole course and plan your route. I would rather go in fresh. But this is way the competitions are, Stage Planning (where to go, remembering where targets are, ect) is an interesting skill, something I am still really bad at haha...
@flylowkey3407Ай бұрын
@@thegungoober4660 you did great 👍! I didn't mean to downplay your performance.
@JustJustin0016Ай бұрын
Why is brown the target?💀
@thegungoober4660Ай бұрын
They are cardboard so its just brown naturally
@JustJustin0016Ай бұрын
@@thegungoober4660 it’s a joke lol
@thegungoober4660Ай бұрын
oh yeah its kinda funny normally at matches, the white ones are "no shoot targets" like hostages or something and the only ones you shoot are brown. :D
@Sami_GenchАй бұрын
Nice man 🔥🔥
@thegungoober4660Ай бұрын
Thanks 🔥
@Zay5.56Ай бұрын
Sounds sick!
@DouglasBVBАй бұрын
Slow Motion vídeo
@MariamAbrahams-rc2srАй бұрын
Wow amazing bro must say 👏🏻😉
@thegungoober4660Ай бұрын
Thanks 😋
@seanwhite304Ай бұрын
Squad 3 .
@thegungoober466017 күн бұрын
Finally posted the ones from the match we were squadded together: kzbin.infotzqp8TG7mMQ?si=2bUadW_SR5A1rRlS
@seanwhite30416 күн бұрын
@@thegungoober4660 Yeah that match was not my best performance that's for sure . I usually finish in the top 40% at Shadowhawk , top 40% at TCSC and top 20% at PNTC for 2Gun Matches .
@ColtPinkyАй бұрын
Why did you make your rifle so heavy?
@thegungoober4660Ай бұрын
Free gainz!
@StilettoCraftАй бұрын
Like 👍
@thegungoober4660Ай бұрын
<3
@alexgatewood5183Ай бұрын
Did you miss every single shot
@thegungoober4660Ай бұрын
Next time I will add hitmarkers :D
@jordanhiggins8645Ай бұрын
@@thegungoober4660 if that man couldn’t tell you was hitting every shot, hell he probably can’t even spell “hitmarker” a hitmarker to him probably is the meaning of his wifes eye every sunday morning after his alcoholic wife beating freakout the night before.
@cesarwalker4705Ай бұрын
Paper/cardboard targets. You just see the bullet passing through hitting the dirt
@alexgatewood5183Ай бұрын
@@cesarwalker4705 ohhhhh ok that makes sense
@thegungoober4660Ай бұрын
Last Part: kzbin.infodeR3Bgy5ELc
@thegungoober4660Ай бұрын
Last Part: kzbin.info_4muV8Ip1gY Next Part: kzbin.info77k5X0rdGV8
@thegungoober4660Ай бұрын
LAST PART: kzbin.infoCztc6-_uSMU NEXT PART: kzbin.infodeR3Bgy5ELc
@thegungoober4660Ай бұрын
p2: kzbin.info_4muV8Ip1gY
@xmldigitz1Ай бұрын
Top ring at a 45??
@LoL-pw9ox2 ай бұрын
My adams arms & pws shoots flatter and less recoil than my aero precision, theyre all 16" rifles to compare
@thegungoober46602 ай бұрын
All things being equal the piston **should** have more recoil. Although, typically the piston guns are heavier, as described in the video, so they have less felt recoil. Perhaps your Aero is more over-gassed than Adams or PWS? Or does your AERO have a adjustable gas block? Probably just getting the right gas setting for your rifle is more important than if its di or piston when it comes to recoil. So you are probably right.
@tasjan91902 ай бұрын
DI is indeed superior to piston driven systems, save maybe for a slight advantage when suppressed. The DIs are lighter, more accurate, and more reliable in adverse conditions. That being said, a lot of the Piston driven ARs are still nice. Edit: Liked and Subscribed.
@thegungoober46602 ай бұрын
Yup! Pistons might give you slightly less gas in the face, but so much gas comes out of the barrel anyways with a suppressor (even a low back pressure one) its kind of a wash either way...
@ismaelrecinos53002 ай бұрын
Nice I’m thinking of getting an a1 lower from them
@thegungoober46602 ай бұрын
Yeah a classic style one would be cool too! They also make the A1 Style with the ambi controls too, if you want the best of both worlds.
@ismaelrecinos53002 ай бұрын
@@thegungoober4660 I don’t mind the standard controls I heard he’s gonna be releasing some uppers real soon I might pick one up.
@thegungoober46602 ай бұрын
What do you think about the brownells uppers?
@ismaelrecinos53002 ай бұрын
@@thegungoober4660 I was actually gonna get one of those first to build my upper I hear a lot of people complain about the machining marks but I don’t mind them as long as the upper works and is in spec but I’m gonna wait on the STS uppers I think there gonna be unfinished hk forgings
@bluemixal2 ай бұрын
Great video! You should do a cost video!
@thegungoober46602 ай бұрын
Hrm maybe, but you can't tell my wife about it! ;D Honestly the cost/availability fluctuates so often its hard to make a video about it that is accurate for more than a few weeks or days even. For example, the Slimline HK stock was 150 when I got it. But now I only see it for 250.
@craykard83252 ай бұрын
Just got my STS 416A5 lower in and this video helped a lot. Much like you, I am using a BRN-4 Upper. I have sourced most of the items but I totally forgot about the Bolt release/stop being different. A question, I could use a standard magazine release button and not have to do the dual one?
@thegungoober46602 ай бұрын
Yes it would work perfectly with a regular magazine release button. Other non HK brand AMBI mag releases MAY be incompatible because of the extra fencing on the left side.
@craykard83252 ай бұрын
@@thegungoober4660 Excellent. This helps a lot. I found d some sources that have OEM or at least well vetted alternatives. Mine being a BRN-4 I don't need to shell out 4 to 5 c-notes for a Giessele HK one when I cam get a Geissele SSA-E 2 stager. AR parts are not too hard for me. The armorer in me hordes AR-15 small parts.
@thegungoober46602 ай бұрын
The Giessele trigger is nice but you are right it is way to expensive. Gotta pay the HK tax one way or another haha. SSA-E should work beautifully!
@GlitchTheDeer2 ай бұрын
What is that wack looking optic on the hand gun
@thegungoober46602 ай бұрын
Its a frame mounted Trijicon RMR. The mount is made by Agency Arms its called the AOM (Agency Optic Mount). Its an improved version of the 6 second mount that Geissele used to make.
@thegungoober46602 ай бұрын
pt.5 kzbin.infozWuHODYDnkg
@thegungoober46602 ай бұрын
pt. 4 kzbin.infoVVsEuDsYfg0
@thegungoober46602 ай бұрын
pt. 3 kzbin.infoXyuoLReAA3c
@thegungoober46602 ай бұрын
pt.2 kzbin.infoOO9tp1hZX-w
@thegungoober46602 ай бұрын
pt.1 kzbin.infonQ_SwR-jhig
@AKEFMA2 ай бұрын
THANK YOU!!!
@thegungoober46602 ай бұрын
You're welcome! Hope I answered all your questions.
@jeffellinger32572 ай бұрын
Flinch
@thegungoober46602 ай бұрын
you caught me :'D
@tacotuesday3702 ай бұрын
What kinda dot is that?
@thegungoober46602 ай бұрын
On the shotgun its Aimpoint T2 on a scalarworks SYNC/01 direct mount. On the pistol its a Trijicon RMR in a Agency arms AOM mount, which is an improved version of the Geissele 6 second mount.
@AKEFMA2 ай бұрын
Great video!!! Can you do a build overview on your STS lower? I’m currently building my HK 416 clone and it would be great to see a video to assist on my build, what parts I need, etc… Thank you!!!!
@thegungoober46602 ай бұрын
Certainly!
@thegungoober46602 ай бұрын
Here you go! kzbin.info/www/bejne/iWnYdHiHdpefhck
@carloszegarra96833 ай бұрын
Nice!!
@alanwright7824 ай бұрын
I have a few of there mounts! Great quality with everything I’ve purchased from them.
@thegungoober46605 ай бұрын
Small correction I said that RAL8000 anodizing and RAL8000 plastic are the same color. What I mean is that H&K refers to them both as RAL8000 even though they are different colors.