Hi, i dont see the part numbers.

Excellent. Straight to the point

What aluminum pedals do you have?

Your video was exactly what I was looking for!!!👍👍👍

Where did you get the Halo Decal?!?

Hello, Are you interested in testing our products? We would like to invite you to test the Drive Belt for you Hisun

Funny I have mine into the shop right now and one of the things I told him I didn’t like was the wireless charger it just makes my phone hot and apparently August 2023 tech tips from Subaru says that that’s normal for just get warm

Looks great! Love the idea of an outlet up front, gonna add that myself . You have a link for the galley screen? Assuming you had to trim it?

Where did you get the black trim around the gear selector

what kayak is this? make/model?

Where did you get the suction device to hold the door steady? The wind plays havoc on these large doors.

I'm picking up my touring XT tomorrow. It has a factory wireless charger, but I think it was installed at the dealer as there was the parts shortage. I say this, because in the back of the car, I found the removed parts for the wireless charger. I will have to see how much I like the wireless charger and whether or not I take it out and put back in the original parts.

Pretty simple to do and I am not a mechanic. I have a 2023, and the wiring was slightly different. There was only 1 main wire terminal to reconnect after I took out the wireless charger. Hint - when putting in the new base, the first screw to put in should be that one at the end which was the hardest to remove. I have a Wilderness edition and the wireless charger is part of the package. It overheats the phone and provides very little charging. There also is no other convenient spot to place my phone other than the wireless pad. I prefer to use a cable which charges faster without the heat. I'm really glad to be rid of it. The dealer where I bought the car wouldn't do it for me.

Need some more videos on this camper!

Is this the same parts/procedure for a 2020 Outback Onyx XT?

Do you have eyesight on your Subaru? I wanted to add an antenna to mine on the front but was worried it’d interfere with the eyesight

Thank you for the video what are the part numbers?

Just used this video to remove the charger from my 2023 Outback Wilderness. Took me 20 minutes and is exceptionally accurate. I had already taken the mat out of mine and it did not good. The charger just heated up my phone, but was exceptionally slow to add charge. I'm fine plugging my phone into the USB C port. Thanks for the video and making me obsess on the clip to hold the shifter knob in........

Where did you buy this part? Could you please leave a link?

I plan to get wireless charging in my 22 OBW and it is good thing I get it as my phone is Android Samsung galaxy Z Flip and I hope not cost alot to replace it at my dealership in Wexford Pa? If around $30.00

This how i did mine . kzbin.info/www/bejne/p6SreaGhlrKGeZo&feature=share8

$45,000 and Subaru has to nickel and dime buyers and make them buy this as an add on.

Just ordered the parts to do this to my 2023. I can’t stand the wireless charger like many others.

Lol

Good upgrade. My 2023 I need all the space I can get lol.

Just took mine out. Peace of crap and if you drop something in the slot it's to thin to get fingers in to get it out. Phone will over heat or it turns off to prevent overheating .

What was this mount please?

oh crab, I am about to put one on to my 2023 OB. is it a bad idea? Can anyone educate me more about the charger so I can make a better decision? If anyone spends extra money and goes through all this trouble, the "wear" seems to be out weight the "awesome." please 🥲

Thank you for the video. I know you we’re removing your wireless charge pad but I’m going to be doing the opposite lol. 😂. It was easy to follow your process.

Okay but how did you get tuxmats with the wilderness logo? That looks epic

Great video, are you selling that wireless charger you removed? 👀

Thanks for the video! What phone holder is that?

I have the 23 outback with out wireless charging and with the wireless android/apple car play it drains the battery quick so I need to have the phone charging, I see the benefit but I don't want another $500 for it and have warm issues.

Hisun stinks. Went for price and got what I paid for. Nothing. Go Razor, or CanAm. Cost more but they take care of the customer.👎👎👎👎👎 no stars here.

Glad I didn't get the wireless charger! Figured my phone would be plugged in for android auto anyway

Got the exact same one. Waiting for my special order OBW (Geyser Blue) to come in any day now. I actually bought a bunch of stuff waiting to install when I get the car. All 6 speakers, a REAL front skid plate, center consul cover and Anti Wobble Insert which is supposed to eliminate the jerk every time the "Auto Engine Shut Off" starts and you go into gear. Great OBW content you have, keep em coming!

Great tutorial man, really well done. I didn't get the wireless charger in my special order OBW because its kinda pointless when ill always be tethered with CarPlay which charges anyway. HOWEVER, for 2023 Subaru will have wireless CarPlay and that makes a wireless charger worth having!

Great video I didn’t even think of this despite not being a fan of this charger. If I’m using CarPlay for maps I’m already plugged in. So this is really only useful when I have friends in the car who need a quick charge. Definitely going to try removing the rubber mat. Would be interested to hear if you know anything about turning off the auto engine shutoff feature when idling. Wish I could set it to permanently off. That and the rear seatbelt reminder ! My setting is in the off position yet it keeps beepin with our dogs!

I spent $160 to purchase and install this veru charger. So when I had some issues, I was unwilling to toss it away. I figured out some answers but not all. 1. Take the rubber mat out and toss it. It contributes a LOT of the heat problems. 2. Under Power saving. Test different settings to reduce Power used from Battery and/or Chargeing of the battery. I find I don't need the power saving unless I am on a 1+ hour trip then it starts to get a bit too warm (using google maps, Charging, Bluetooth, Plex (music), email, internet) the trick really is to remove the rubber mat. It insulates that slot and with virtually all cases on phones (with no airflow in that slot) they will all (and I mean all) get hot. Nothing to do with the charger, It charges at full power and the phone naturally heats up in that insulated slot. Reduce insulation is the basic fix. It it is used a lot, I would get a small PC fan , and install it to circulate air inside that slot. I just don't worry about it cause I rarely drive over 1 hour with cell phone active.

My wireless charger is really poor quality in my OBW also. Its barely charges and really only heats up my phone. I wonder if we can just upgrade to a better quality charger pad? I will look into it!

I used your link to go buy one! Is there any issue with the door popping open while you drive? Some of the Amazon comments say that.

I had to go a little lower with my propeller because of fish finder is on right side of boat . i also put the pwm by the seat . I do have a backup system incase pwm went out . kzbin.info/www/bejne/p6SreaGhlrKGeZosi=6PHaGb2pUNoe02ik

Let us know how that antenna location works with the eyesight

Great mounting location!

Waste of money

Are your footrests upside down. The instructions for my moment and beaver tail show the foot pedals with adjustment rods on the bottom not on the top. Hope I’ve fitted mine the right way

What is that orange thing hanging off the back of the yak?

Now that I have looked at the wiring in the front hatch again, the one you modified to run power, I realized that I can use that wire run designed for the Feel Free motor option. It appears the wire is 10 or 8 gauge which should be fine for my smallish 30lb trolling motor. Now it’s about trying to find a smaller battery. Any opinions anyone?

Good videos of your power set up and how you have rigged a few things. I'm in the process of outfitting my new dorado with a trolling motor in the pedal system hole. YakGadget has a transom mount system that I have purchased. Ordered Watersnake Tracer 30lb. I believe everything will easily go in and out. Fingers crossed. I like the Dorado a lot but not having access to the inside means I am going to have to run power within the working area of the Dorado. Using 10Ga wire so using the front wiring is probably out because that appears to be less than 10Ga??? Wondering if you have come across anyone that has fished wiring through the inside of the Dorado. I'm guessing it's closed up the way it is because of the self-draining aspect.

Can you still adjust the pedal position when the rudder is installed?