jevers123

Пікірлер

@Xarza17 5 күн бұрын

I am repairing propellers and I need information

@jevers123 4 күн бұрын

@@Xarza17 what information would you like to know

@Xarza17 4 күн бұрын

@@jevers123 I don't have a pitch block. I want to buy one. And I need to know if the propeller is machined on the pitch block or if I need to measure and straighten the propeller. I work with aluminum propellers.

@jevers123 4 күн бұрын

@@Xarza17 this is a really tough one to answer, if you are a new business start up, you should consult with the propeller manufacturer, a pitch block needs to be secured to a mount base per manufacturing repair specs , aka a jig, thank you for the questions, it's the favorite part of my day job

@Xarza17 5 күн бұрын

what material is the fin made of?

@jevers123 5 күн бұрын

@@Xarza17 aluminum

@Xarza17 5 күн бұрын

@@jevers123 what alloy?

@Xarza17 5 күн бұрын

Doesn't machining on an anvil solve geometry problems?

@jevers123 4 күн бұрын

@@Xarza17 I'm not sure how to answer this, for me it's 3 dementional art , the anvil is the equivalent of the wood frame that supports a canvas, the boat propeller is the canvas and the hammer is the paint brush , the paint is All the tables and gauges and tracking equipment, and that gear you will have to search for on your own, much like the show "Forged in fire" I'm only allowed to show X amount

@Xarza17 4 күн бұрын

@@jevers123 I saw in the video that you straightened the propeller geometry on an anvil. After that, you took a caliper and measured the propeller and then straightened it after measuring. I'm trying to understand, is straightening on an anvil not enough to restore the geometry?

@jevers123 4 күн бұрын

@@Xarza17 yeah the anvil is for fine shaping, the blades tend to get little warps here and there from the heat process, some minor straightening is needed, the pitch block is for twisting the whole blade at once, and the calipers are used to make sure we get every blade into position perfectly, if we don't the prop will vibrate , no matter how good it gets balanced in the end process hope that helps, and if you're looking to do aluminum you should be able to hit them out on a pitch block without heating

@WilliamSchober-l8g 6 күн бұрын

Hey thanks for sharing…?

@andykray1 26 күн бұрын

Can you change the pitch of a 25pFury to 24p?

@tall1fin1 Ай бұрын

Are you still doing prop work? How to contact you?

@jevers123 Ай бұрын

@@tall1fin1thank you! yes, I am still doing prop work, you can contact me here or at work 772 283 1453 , it's a Florida based company, I work for, I'm happy to answer questions and it doesn't cost anything

@erwan2211 4 ай бұрын

where can I buy a pitch block to repair propeller blades?

@jevers123 4 ай бұрын

We get the pitch blocks from the propeller manufactures, we email them or call them.... Hope this information helps

@stanleybest8833 5 ай бұрын

I'll remember your video when my prop is down and out.

@angelobrinkord2204 5 ай бұрын

Good shit, you know Keith?

@sgreene2036 6 ай бұрын

I did a pitch change once. It stayed that way until she let go of my 🏀 ⚽️

@jevers123 6 ай бұрын

Thank you...outside of everything I do this is one of my favorite videos, it's fun do functional metal art work

@MunkyWrench 6 ай бұрын

It's a start.. welcome to van life

@jevers123 6 ай бұрын

Thank you

@eileenhaughton3558 7 ай бұрын

I remember those bed frame, those were the days.

@nancywarner5782 7 ай бұрын

I would have never thought to use those old metal frames for a van bed, great idea. Looking forward to see how it turns out.

@daniyes 8 ай бұрын

👍👍👍👍

@FlatBroke612 9 ай бұрын

No way you didn’t melt the o-rings, seals and heat the bearings if you welded that assembled.

@jevers123 9 ай бұрын

Thanks for for reminding me of something that should have been mentioned in the video, most of this work comes in via marine companies and mechanics, they know all seals will be destroyed, but they won't do that work until we do this work first, when a diy customer brings one of these in that's this bad we tell them they are going to have to replace all the seels

@Rosejade13 9 ай бұрын

Crazy me n my dad have done this a Lotta times we always cleaned the welds up and polished it brand new sanding n stuff why would they leave that wled

@jevers123 9 ай бұрын

Part 2 is up , it's grinding and cleaning, , I don't do the painting thing , every one wants to paint it themselves I just provide a small metal canvas

@allsearpw3829 9 ай бұрын

You know where to hit them , great work , Mr Brain Bates does the same on ours in the UK , PROP WIZARDS ARE HARD TO FIND .

@davidm8657 10 ай бұрын

Has anyone had to bypass the fuse? My key broke off and I’ guess I’ll need an new fuse assembly.

@jevers123 10 ай бұрын

That's the problem I haven't heard of, and if you find a fix please share a video on how to fix it , the community will watch it

@massthiam4615 10 ай бұрын

Bonsoir je suis spécialiste de réparation dès Eliche

@demetresichinava5088 11 ай бұрын

👍👍

@haroldculhane4110 Жыл бұрын

Just gave mine back because it's junk

@RastusMcbride Жыл бұрын

Yeah was wondering at what point heat would be indicated. Thanks

@kimberlyrogers8672 Жыл бұрын

This happened to mine after 5 years of having it. I recently bought another ryobi brushless self propelled to replace the original u til I could fix it. They deff make it complicated to open the mower because I attempted before. I will bypass the switch sometime soon like u did.

@MelvinEguia-hr4vu Жыл бұрын

Great technic,I'm a pich adjuster of boat propeller,thanks for the video

@MelvinEguia-hr4vu Жыл бұрын

I want to work with you sir,in your great shop

@sondon7103 Жыл бұрын

Lightweight is good and what did I use it for it’s a lawnmower kzbin.infoUgkxTPN04aT-Qdjr_KS3ql7ng8wnU3wwsCqk also recommend Yes it is lightweight so hence not as robust as our old one. But if you take care it does the job really well.

@TheBoneruner Жыл бұрын

Just gonna say it - you look like Jon Turturro

@arwanmanurungmanurung6514 Жыл бұрын

I'm a novice or am I learning to make a ship's fan, and a steamer is less speed than my engine was powered by 3000rpm before it had 12 knots. I need a lesson from you on how to make boat fans or waterjets like those in other areas. from indonesian Batam🙏🙏

@jevers123 Жыл бұрын

I'm not 100% what you are referring to, in the part of the world I live in a ship's fan would be considered or called an impeller, , unfortunately we don't do work on those because they're mostly manufactured over in Europe, by Jacuzzi or bombardier , but like I said I'm not a hundred percent sure of what you're referring to, you give me more specs I might be able to point you in the right direction of what you need

@MrCanonballs Жыл бұрын

Far out!

@PunjabiKush Жыл бұрын

Waste of time

@jevers123 Жыл бұрын

Why?

@kevn22 Жыл бұрын

Badass brother!

@jevers123 Жыл бұрын

Thank you it means a lot

@dimagen52 Жыл бұрын

Отличная работа.

@deliber8cre8tor Жыл бұрын

Looks YUMMY!! I LOVE the retro reindeer garland @ 1:46....

@karelj.rodriguez3942 Жыл бұрын

The music!!!.

@jevers123 Жыл бұрын

Thank you ❤️ that means allot

@stevenyunior2145 Жыл бұрын

Cómo se llama ese model

@stevenyunior2145 Жыл бұрын

Cómo se llama esos modes

@LuisBermudez69 Жыл бұрын

Cool

@gbass7328 Жыл бұрын

Great work and video. Name of prop shop you’re at?

@jevers123 Жыл бұрын

Blair Propeller and marine Stuart FL 34997

@gbass7328 Жыл бұрын

@@jevers123 👍🏻

@lonniesimmonds2294 Жыл бұрын

Can you take a 23 pitch scorpion and make it a 21pitch? What would it coast and whats your address.

@Common-Man Жыл бұрын

Thanks brother!!! I didn't even need to watch the video, the headline said it all and it worked!!

@shepherdsknoll Жыл бұрын

Here’s how I fixed mine - threw it in the garbage and bought an Atlas.

@Bluebark64FIS Жыл бұрын

How much pitch change can a ss prop handle? I have 2 sets of cleavers I've been thinking of having done.

@jevers123 Жыл бұрын

2 inches, up or down, 3 inches is possible, but not recommended, hope that helps

@Bluebark64FIS Жыл бұрын

@@jevers123 You should add a link to your shop...

@clarkgwozdecki6782 Жыл бұрын

Can a nibral prop be brazed to fill in some missing metal or does it have to be welded? If brazed can you recommend a rod I can buy?

@jevers123 Жыл бұрын

Thank you that's a tough question, I have seen some props come in that were brazed, and they didn't last very long, , not to get too technical, I recommend having it tig welded , I run AC if it's thin , DC if it's over an inch thick, argon to keep oxygen from getting to the weld , hope this helps

@sledgenwedge 5 ай бұрын

@@jevers123If I wanted to apply for a job at a propeller shop.Would it be smart to show up with a copper hammer? I mean, I would have a jump.Start on anybody else applying.Because I have the tool.And a clean slate that they would teach me how to do what they do and nothing else

@DSKim-ej5uf 2 жыл бұрын

At this moment when a little nostalgia approached, I caught my eye on your KZbin window, passing by an unknown and mysterious algorithm. Just because the thumbnail caught my eye, I accidentally saw your video, and I liked it the most and fell in love with your channel. You have the ability to make your videos instantly stunning and attractive. My past memories that shimmer in your video are stained with nostalgia. My past memories that shimmer in your video are stained with nostalgia. When I watch your video, it feels like an ecstatic and pleasant wind brushes my cheeks as the sun goes down in the field and evening. Even if it's just a passing relationship that I've never seen offline or don't know the name of, even if it's over a mountain or across the sea, even if it's far away, like this in the online KZbin world. Thank you for the algorithm that you can meet with great images. Even if strong waves are swept away in the vast expansive and fantastic space of KZbin, I will not forget the relationship we met with your beautiful video for a long time. Like a grain of sand on the beach, I am very lucky to have accidentally encountered an algorithm introduction video among countless videos. I am happy that I have finally found what I am looking for. Your video shines the brightest on my KZbin window right now. When I watch your videos on KZbin, somehow everything feels like a dream. My reflection on the monitor window looks like I'm leaving for a distant KZbin world that I don't know with an expression looking for something. Please continue to upload your wonderful videos often. How did you have such a wonderful talent that is full of the mysterious charm of your video? Your video is the best video. Your video, which I feel was made with unsparing sincerity, has a feeling that positive energy will surely come to you in the future and will receive a lot of love soon, so my heart is very happy.

@scottknabb2927 2 жыл бұрын

Cool video. Groovy jam too

@robertjerome1889 2 жыл бұрын

Should have used a hole saw to lighted the boards.

@joshymcdaniel9233 2 жыл бұрын

Dang I wish lower view videos showed up this took 3 different times and hours to find’ lol Anyone have any ideas here….? Loosing my mind lol The plastic battery cover door randomly fell off 1st time in 3 years of owning it when moving it in fold down position just straight fell off’🤦🏻‍♂️ Plastic piece is not broken nothing damaged on it’ How in gods name do u get that little ass spring back in the hole? Anyone??? U will be my hero lol

@5199John 2 жыл бұрын

Great video! Had never seen this before an didn't realize it could be done. Your music, however, is really distracting. I tried turning the sound down, but in order to here your explanations, that doesn't work. Thanks for posting.

@jackbeveridge6215 2 жыл бұрын

thanks for the video about the crummy switches. fortunately i haven't had that problem yet. but i'll know what to do when it happens. my problem is that the lowest setting is too high for my grass. is ther any way to lower it more than the regular setting. as it is now i have to mow once a week because it grows so fast. it is pretty and green though.

@danalex255 2 жыл бұрын

I have a SS Stiletto in Spanish Fort, Al. 15 x 15, pressed hub, cupped, rake, vented. I need to change pitch to 13, and diameter could decrease - from no change to an inch would be ok. I don't think it make a lot of difference. Where are you, what would you charge, would you be interested in doing it, and when could you do it?

@scottst.vincent6964 2 жыл бұрын

Thanks for sharing. I was wondering if my stainless steel prop could be repitched. Well now I know it can be!

@jevers123 Жыл бұрын

Thank you it means a lot glad Iwas able to help...sorry I'm a slacker

Ең жақсы KZbin

Пікірлер