Hi Please check out 6:00 to see how you can enlarge. I belive that will answer your question

Hi Artlantis 2024 is best for that

Thanks very much

In Archicad 27, you can rotate your building to align with both project north and survey north using the following steps: Setting Project North 1. Open the Project Map: o Go to View > On-Screen View Options > Project North. 2. Adjust Project North: o Use the Rotate Orientation tool to rotate the entire building model so that it aligns with the desired project north direction. Setting Survey North 1. Import or Create the Survey: o Import the survey data or create a survey plan within your project. 2. Align Survey North: o Place the survey data correctly within the site plan. o Use the Rotate Orientation tool to rotate the survey plan so that it aligns with the survey north direction. Synchronizing Both Orientations To switch between project north and survey north views in your floor plans and site plan: 1. Create Two Different Views: o Create one view with the building rotated to project north. o Create another view with the building rotated to survey north. 2. Save the Views: o Save each view in the Navigator under the appropriate category (e.g., Floor Plans, Site Plan). 3. View Settings: o For each saved view, go to View Settings and make sure the Orientation is set correctly (either Project North or Survey North). Using the View Map 1. Access View Map: o Go to the Navigator and open the View Map. 2. Adjust Orientation in View Settings: o Right-click on the specific view and select View Settings. o In the Orientation section, choose either Project North or Survey North. By using these steps, you can manage and switch between project north and survey north orientations for your building's floor plans and site plans in Archicad 27.

Thank You!

You are a welcome

Thank you!

In Archicad 27, you can add a new mesh point to your terrain or mesh using the following steps: 1. Select the Mesh Tool: o Click on the Mesh Tool from the Tool Box. 2. Activate the Mesh Tool: o Ensure the Mesh Tool is active by clicking on it in the Tool Box. 3. Select the Mesh: o Click on the mesh in your project to select it. 4. Add a New Mesh Point: o Right-click on the selected mesh. o Choose Insert New Mesh Point from the context menu. o Click on the location within the mesh where you want to add the new point. 5. Adjust the Elevation: o Select the newly added point. o Adjust its elevation by entering the desired Z-coordinate value in the Info Box. Detailed Steps with Screenshots 1. Select the Mesh Tool: 2. Activate the Mesh Tool: 3. Select the Mesh: 4. Add a New Mesh Point: o Right-click on the selected mesh and choose Insert New Mesh Point. 5. Adjust the Elevation: If you still can't find the option, it might be helpful to check the official Archicad documentation or look for tutorials specific to adding mesh points in Archicad 27.

I don't get what you mean

To create sections in Archicad 27, follow these steps: Step 1: Activate the Section Tool 1. Open the Tool Box: o Locate the Tool Box on the left side of your screen. o Click on the Document tab to reveal the Section Tool. 2. Select the Section Tool: o Click on the Section Tool to activate it. Step 2: Place the Section Line 1. Draw the Section Line: o Click on the starting point of the section line in your floor plan. o Drag to where you want the section to end and click again. 2. Define the Section Depth: o After placing the section line, you will be prompted to define the depth of the section. This determines how far back the section will cut through the building. o Click to define the depth. Step 3: Adjust Section Settings 1. Open Section Settings: o Select the section line you just created. o Open the Section Settings dialog by right-clicking the section line and choosing Section Settings. 2. Modify Settings: o In the Section Settings dialog, you can adjust various settings such as the section name, marker style, and drawing scale. Step 4: View the Section 1. Open the Project Map: o Go to the Navigator on the right side of the screen. o Expand the Project Map. 2. Locate the Section: o Find the Sections folder and expand it. o Double-click on the section you created to open it. Step 5: Refine the Section 1. Edit the Section: o Use the various drawing and editing tools to refine the section view. o You can add dimensions, annotations, and other details to your section. Tips for Working with Sections • Multiple Sections: You can create multiple sections by repeating the above steps. • Adjusting Section Lines: You can move or adjust the section lines after placing them by selecting and dragging the ends or the whole line. • Updating Sections: Any changes made to the model will automatically update in the section views. Visual Guide 1. Activate the Section Tool: 2. Place the Section Line: 3. Adjust Section Settings: 4. View the Section: By following these steps, you can create and refine sections in Archicad 27. If you encounter any issues, refer to the official Archicad documentation or tutorials for additional guidance.

Welcome

Hi Rosemary, In ArchiCAD, to unselect a specific wall, you can hold down the Shift key and click on the wall to toggle its selection state. Alternatively, you can use the Marquee Tool by holding Shift and drawing a marquee around the wall to unselect it, or you can go to Edit > Edit Selection Set and deselect the specific wall in the palette. To cut out walls from selections, you can directly select the walls you want to keep and hold Shift while clicking on the walls you want to remove from the selection. Another method is using the Find & Select command (Ctrl + F), setting criteria to filter the walls, clicking Select Elements to apply the filter, and then cutting or deleting the selected walls. You can also use Select All (Ctrl + A), then hold Shift and draw a marquee or click on the walls you want to deselect. Thank You🙂

You are welcom!

Hi, you have to draw it. Here is a tutorial on how to do that kzbin.info/www/bejne/h6DaqaZ5l9aFo7Msi=UNTWBmu_1kvzcuzR Thank you.

Hi Jay, I will make a tutorial about that.

Thank you. I have a tutorial on how to do a 3D in Autocad. Here is the link : kzbin.info/aero/PL3-CCtTWsvaaYCXrP_zDSwauPnWQyG6mV&si=4yNLgHh-l_Gp9xxM

Hi, we don't offer a free tutorial about but if interested in paid training kindly send your details to our email. Thank you.

Hi, I followed the same steps as the one in living room. Search for the object you want and insert it. Thank you.

And the measurements in their settings do we change ??

Yes, you can adjust them to fit your room size if they are larger than the room dimensions.

@@SpectrumVirtualAssistants thank you

You are welcome

Thank you!

Thank You. Please check my ArchiCAD 25 tutorial for that part here is the link kzbin.info/www/bejne/ppPQlYaao8mmgrs

Thank you so much - I just started ArchiCAD with ArchiCAD 26 so I haven't watched previous versions videos.@@SpectrumVirtualAssistants

I understand. Glad the tutorials are helpful so far.

Hi Yenye, I will do that. Thank you!

@@SpectrumVirtualAssistants Thanks I will be waiting 🙏

Hi I am using a student version from Graphosoft.com. Can't be shared unless you have your own account.

I am not a student that I haven't student Id

I see. I use licensed ArchiCAD 26 version from Graphisoft.com not a cracked one. It can't be shared unless you have an account from their website. Kinldy create an account they will give you a key.

Now I created my Graphisoft account and How can i get the free key ?

Welcome, Right click once on the first wall, click on shift key and right click on second wall. Thank you.

Welcome Riz

Hi I don't get the question. Do you mean how I choose the lengths of my dimensions ?

You are welcome!

Hi Daria, thank you for the comment. I will check out how to solve that issue and get back to you.

Hey, did you figure out how to make the surface appear when you render?

You are welcome.

Hi, please let me know if you are using ArchiCAD 26

Hi, glad my videos are helpful!.Thank you!

Hi Danial, I did that to teach beginners how to drag walls in ArchiCAD 26 . Thank you!

Welcome Yenye I will do that. Thank you.

Hi Let me check and get back to you. Thank you.

Hi Faith, You are welcome!

You can increase the speed of the video that why there is that option and learn how to articulate yourself without using profanity!

They are part of ArchiCAD's library