We can't get the Smart button to come on to adjust tempt....any suggestions

I like how they show a gas fireplace in a corner brush guide

Can you use this on brick inside of a fireplace?

Music drove me crazu

This video was retarded

Yeah I need to get one of these retrofit on to my 30 year old fireplace. I almost never use it because of the smoke drawn into the house 😢

Very good. Thank you for the detailed advice!!

It won’t connect.🥴

Do you have an update for more recent models on how to find the pilot knob?

Perfect. Thank you. Five starzzzz

I just want to spray paint the 2 chain/metal pull-curtain closures. Since it's a hot Los Angeles Summer do I really need to start a fire in my wood-burning fireplace to cure the paint ?

I want to know with your knowledge please explain regarding a gas fireplace wall vent that is 2’ 6” from open neighborhoods private patio

what about paint VOC off-gassing after curing?

ridiculously short video, if you're going to go to the trouble, do it right and show people how you actually do it

You get up every 3 hours and put wood on it …..Daaaaaa

Season your wood for 29 years and you’ll be fine.

Thank you!

almost 20 years on my 1401. Just gaskets and blowers and I use copper washers on the hinge pins

Wouldn't that burn really ineffciently ...lots of particulates and smoke and not to forget the creosote! IMO and most stove manufactures suggest that one shouldn't burn a wood stove all night..unless your ready for chimney troubles..constant cleaning and maybe you're cool with a one off chimney fire.

You didn’t show the regulator replacement. That’s what I’m looking for. There is a threaded piece behind the knob that controls the low/hi flame. Is this a pressure adjustment because mine is loose. Thanks

Maybe I chose the wrong stove but I have to baby sit mine, feeding it wood periodically. The one time I loaded it up and choked it down the temps went sky high! Also if you buy a catalytic stove you will have to periodically clean the combustor.

That annoying music failed to completely drown out the dialog but it did impede it.

Great video!

Why would air go out the fresh air kit? My chimney seems to draw well in my fireplace but I noticed embers and smoke both being sucked into the fresh air intake and being sent outside.

Have an issue where the remote will only communicate with the receiver if the remote is a foot away from the fireplace. Batteries are new. Any suggestions?

Every video should be like this.

Thank you thank you thank you for this video, got my fplace all started up with the remote!

Any idea if milpac black can be used on b-vents too?

Thank you

Is this Approved in Canada ?? TSSA approved or CSA approved

Impossible to hear.

Thank you for taking 1 minute to explain what should take 1 minute to explain, not the usual 9 minutes and 47 seconds. So Appreciated!!!

this is a cute video that reminds me of old films from school .. nice that you've updated it with something more accurate and up to date tho lol. Say Hi to Bob

Full masonry is just the best i had mine clean and its a 3 story chimney it did have a slight crack at the very top the guys said in all reality your chimney is so overbuilt with stone i wouldnt worry the industry standard frowns on that but the brick is so thick and so many layers the whole run from bottom to top i am not worried in the olden days that was all that was used. And with the fresh air intake the air is whipping so quick threw it it is unbelievable. It probably happened from heating the flue to fast i can go from no fire to a ranging fire in minutes i wish i knew when i got the house to heat the flue slower. Oh well live and learn i guess. But ya dont dampen fires yes it slows the burn but slow burn is a dirty one. Amd good dry hardwoods is a must no damp crap wood.

Dry wood and flues wide open. Faster hot burn is cleaner. You slow it it gets dirtier period.

Can I use a 500w power station incase of a power outage so the fan can blow the heat ? Can this would stove be put in a basement connected to a vent(s) to warm the rooms upstairs or the other rooms throughout the house. It's I vent pipe in my basement connected to my furnance.I want to know can I disconnect the vent pipe to my furnace and connect it to the wood stove to warm the house ? When I clear up some stuff off my phone I can take some clear good pitchers of my furnace

I built my hearth with concrete board and tile, the imperial heat shields I grabbed at a store that had them in the back for years ( got both for 84.00) had the concrete board cracked on both so I added another 1/2 inch concrete board to the back of it , I have a 2020 epa and mobile home certified wood stove along with double class A pipes and mobile home install kit, gave front clearance 28 inches and 15 on sides and back to be extra safe and hope I did right .

I wish I could make a radiating something so all my heat isnt literally going out the roof... it seems like such a waste.....

clean and environmentally, humans have been burned fire to keep warm and cook on for nearly 6000 years and yet the earth had no issues...all this crap about save the earth is the issue. they give glory and worship the creation and spit in the face of the Creator, the Lord God the maker of heavens and the earth and all it contains... The Lord has shown me what is coming, I've been preaching this hard message for over five years and most carried on like all would be okay, well here we are and the Lord is turning up the heat...for when a nation forsakes the Lord, the Lord forsakes that nation...Psalm 9:17.... Due to the abhorrent sins of this once great God fearing nation, the Lord God has removed His hand of blessing and is now pouring out His indignation upon us. The Lord works in this fashion... 1. He removes the food production of the land. 2. He removes the wealth. 3. He removes the people. This pattern is well documented through out the Holy Scriptures. Yet even most sin blinded Christians still point the finger at the leaders... Sin of any nation against the Lord God comes with consequences Haggai 1:5-7 King James Version 5 Now therefore thus saith the Lord of hosts; Consider your ways. 6 Ye have sown much, and bring in little; ye eat, but ye have not enough; ye drink, but ye are not filled with drink; ye clothe you, but there is none warm; and he that earneth wages earneth wages to put it into a bag with holes. 7 Thus saith the Lord of hosts; Consider your ways. Like Isaiah, I asked the Lord how long do I preach this message and this is where He lead me too... Isaiah 6:11-12 King James Version 11 Then said I, Lord, how long? And he answered, Until the cities be wasted without inhabitant, and the houses without man, and the land be utterly desolate, 12 And the Lord have removed men far away, and there be a great forsaking in the midst of the land. Now understand these words are written to the children of God and not the children of the devil....let that sink in.

Be careful how much paper you use to start the fire. I would use too much and after a while the fly ash from the paper clogged the catalyst

EXCELLENT PROCEDURE

I have a 19 57 Illinois golf Central caboose in the backyard and it has a wood burning oven and I'm trying to learn how to get the most heat keep it consistent without smothering it or letting the flames run wild

SMOKE-- a large amount of smoke emits to house when lighting. Please share some pointers on what to do~~

Can I paint inside my wood burning fireplace - insert?

Can I use spray paint for engines on stove.

If I don't know what type of paint is currently in my fireplace can I paint over it with high heat paint or do I have to remove it first? Someone painted the bricks inside and out of my fireplace. Thank you

Burn only dry hard wood with an epa stove. Lowest creosote. + use double walled insulated SS flue from the flashing of roof to the sky.. In doors can be single wall

Ty sir

I got a home with an addition and a gas fireplace. They used a ridge vent as the chimney vent.. im not sure thats up to code or not but is a cathedral ceiling and they put in the ridge vent and built a u channel out of 1x6 on the ceiling to channel the fireplace.. ridge vent is 15 feet long.. the issue i have is since there is a ridge vent on a cathedral ceiling with only the 1x6 in between the conditioned air and outside air, there is condensation building up and causing mold to develop on the drywall ceiling and wood.. i dont use the gas fireplace because the stupid vent and i dont trust it. But the mold is too much so im going to have to remove the vent, fill in the channel with firestop foam then install some kind of chimney like a simple double wall 4" tube with a cap and boot .. bitch of it is they built the entire wall the fireplace is on out of flag stone.. so theres a good 1 foot by 2 foot hollow leading up to a metal enclosure directing the air to the ridge vent.. i dunno what they were thinking because i dont get how any air was supposed to create the negative pressure for the chimney to work properly without blowing the carbon monoxide right back in on a windy day.. theres no flu only the built in one on the gas insert.. some people arent all there i think..

I used b vent on my wood stove and it was a really bad idea.... kzbin.info/www/bejne/bXOWonqmbbySjdk the whole inside melted. I see you are using a gas stove however, so this is way different. Great video, awesome camera work and editing.