11 ай бұрын
3 жыл бұрын
Пікірлер
@igotJesus88 13 күн бұрын
I’m having trouble keeping the temps stabilized. It goes all the way up to 300 and down to 200. I have it set to 250 and using small splits. Same setup almost.
@RelicArms 12 күн бұрын
+@igotJesus88 Where do you have your temperature probe installed for the smoke daddy ?
@igotJesus88 12 күн бұрын
@@RelicArms hey! I have it all the way to the left side by the smoke stack. Where it is on this smoker in the video.
@RelicArms 12 күн бұрын
+@igotJesus88 I gotcha. Does it fluctuate when you’re using pellets only or mainly when you’re adding splits ? you might possibly be using too much or too big splits .
@igotJesus88 12 күн бұрын
@@RelicArms I thought about that. Without splits it will go up to 280 and back down to 217. Thanks for the replies BTW. What does yours stay at?
@RelicArms 12 күн бұрын
@@igotJesus88 man mine probably stays within 5° of what it is set at . I’ve never seen it swing like that so I don’t know what is going on with yours?
@dontblameme6328 Ай бұрын
Instead of spending money to fix a mass manufacturer's poor design, just get a properly designed smoker. No need for the failure prone electro-mechanical contraption.
@stevegreene6176 Ай бұрын
What were the results
@Redstagwsmnp Ай бұрын
Turn that noise chit off
@nelsonwaters4867 Ай бұрын
Have been to David’s shop. The engraving is phenomenal
@russellgrigg5202 Ай бұрын
I hear ya buddy yall guys watching you need to get your stuff engraved it's really cool
@Redstagwsmnp 2 ай бұрын
The music is just annoying
@sgtserginsky 2 ай бұрын
Thank you for showing the deform selection tool. Never noticed it before.
@Davidesquivel-iv4pw 2 ай бұрын
I cant get my fiberlaser20w to engrave like that I'm trying to figure out my settings and what I'm doing wrong
@lyleswavel320 2 ай бұрын
That's awesome. Definitely need me one like this smoker
@MCBuildNH 3 ай бұрын
Seems like the 2d setup is a lot of work just for one area. I have a hard time thinking of a time I have graded anything with one slope or flat. 3d is definitely the way to go. Topcons MC Mobile system is affordable and integrated.
@dasfreakster 3 ай бұрын
Kool video. Where can you find the tubing?
@RelicArms 2 ай бұрын
Hey buddy, it’s just standard 1 in. square mild steel tubing available at any steel supply company
@tadpolebo 3 ай бұрын
Looks more like in a lake than Holston river!
@halftime174 3 ай бұрын
Refreshing to see the BIG inland stripers now that I moved from the coast - Keep your great content coming !!!
@mouafishing559 4 ай бұрын
So you’re using pellets and actual wood? I’m assuming you’re getting more smoke flavor since you’re biting actual wood.
@RelicArms 4 ай бұрын
+@mouafishing559 that’s correct, it’s awesome
@williamarnold1963 4 ай бұрын
How fast were u trolling
@RelicArms 4 ай бұрын
+@williamarnold1963 typically between 1.5-1.7 mph
@seanhaywood1789 4 ай бұрын
Nice setup, I am currently looking for a 500 gallon tank to build a reverse flow pellet rotisserie system with a water tray setup where can add water from outside, then the plate in the bottom for the reverse flow system angled to catch grease and drain it to a shutoff valve where can have a bucket to catch. This will be on a trailer and also have a mounted generator to provide the power. The thinking behind it is to help support different Masonic Lodges with cooks for charity. Do you also have fire bricks in there to keep heat? Just a thought, maybe when wrapping keep the door closed till ready to put back in this would keep the temp up until ready to put the meat back in,
@Baddest_mfer 4 ай бұрын
Hello fisherman? Does Russel lake have any trout? Not that you’re using them haha.
@RelicArms 4 ай бұрын
+@EthanY-ih9yc it does they actually stock them there as well
@Baddest_mfer 4 ай бұрын
Thanks
@williamturner6527 4 ай бұрын
I’m sorry for your lose! Love you man! Keep on keeping on!
@RelicArms 4 ай бұрын
+@williamturner6527 thanks William. We appreciate your support Buddy.
@donniemccorkle8671 5 ай бұрын
Enjoyed video, brag on Jesus
@Nynexx 5 ай бұрын
can you send me the setup files fo the rotory?/lightburn file. thx
@d.l.huntministries8131 5 ай бұрын
. Awesome!
@philipxj18 5 ай бұрын
👏🏼👏🏼👏🏼👏🏼👏🏼 beautiful. The eagle is super badazz
@RelicArms 5 ай бұрын
+@philipxj18 thank you sir. We appreciate your support.
@winklers12 5 ай бұрын
How do you keep it from rusting when you're done?
@RelicArms 5 ай бұрын
+@winklers12 hey buddy, you can either keep it oiled or tape it off and spray with a satin clear or whatever sheen matches the original finish the best thanks for watching
@OMGLaser 5 ай бұрын
That's Awesome!!!
@SweetSmokeBBQ111 5 ай бұрын
Great video! Any chance of getting the specs on that pellet hopper housing?
@tateramos2576 6 ай бұрын
I just put in a vertical baffle aka “scoop” for my brazos as well. I have seen a few people drill a few holes in them to let a little more heat through, seems getting higher temps like 300 can be a challenge without them. Did you put holes in yours?
@RelicArms 5 ай бұрын
+@tateramos2576 I have not put any holes in mine and honestly 275 to 300 is about as high as I ever go anyway and I haven’t had any trouble with that
@Ruckusism 6 ай бұрын
Great video I have a pitboss I have been playing around with, are the fire bricks worth putting in a pellet smoker?
@RelicArms 6 ай бұрын
+@rzor93 they definitely don’t hurt that’s for sure. They maintain temperature great
@Ruckusism 6 ай бұрын
@@RelicArms I been wondering if a taller smoke stack would benefit my 1100 pro series pit boss. Ive heard someone saying running a bigger stack than the grill needs will cause "stale smoke" and creosote build up.
@OMGLaser 6 ай бұрын
That's helpful!
@RelicArms 6 ай бұрын
Thanks Richard
@Boats20 6 ай бұрын
Awesome video and graphics. Where did you get your Pmag jig? If yours, would you sell the stl file for it? Thanks
@RelicArms 6 ай бұрын
+@Boats20 Hey man thanks for watching, I sourced the jig on Etsy, I don’t yet have a 3d printer. Have a good one!
@David-er1cy 6 ай бұрын
Nice fish, where did you get your 3 rod holders at
@keithhobbs 6 ай бұрын
how much?
@arnoldaguirre1250 7 ай бұрын
This will be my first time using a pellet smoker and I’m fixing to build me one. I like that hybrid idea that you built. I just need to learn how to set my pellet smoker so I can try to perfect my on hybrid.
@OMGLaser 7 ай бұрын
Awesome!!
@stellageraldputnam5406 7 ай бұрын
That’s cool, great job
@MikeEller-l9i 7 ай бұрын
Where can u buy trout for striper fishing
@RelicArms 7 ай бұрын
+@user-ep7vv1zj9b Lake Hartwell Outdoor Center is where we get ours. Thx for watching
@calvinflowers369 7 ай бұрын
This is amazing 😮
@michaelschuld9970 7 ай бұрын
Turn off the clicker, please
@RichardZhang-i4h 7 ай бұрын
Looks great!
@RelicArms 7 ай бұрын
+@user-zr2lk8oj8c Thanks Richard
@mainelylocks 7 ай бұрын
Very nice. First comment too. 😎
@RelicArms 7 ай бұрын
+@mainelylocks thx brother
@thomasquantz5173 7 ай бұрын
So how well does this cook compared to normal offset
@RelicArms 7 ай бұрын
+@thomasquantz5173 that’s the beauty of it , for the first 4 hours of the cook when the meat is taking in the most smoke I primarily run it like a traditional offset adding splits like u would a traditional. The pid controller automatically reduces pellet input while still controlling temps. Then when I’m ready to let it ride and get some sleep, I just stop adding splits and the pid makes its adjustments to pellet input and will still maintain the set temps throughout the rest of the cook
@mainelylocks 8 ай бұрын
Awesome. Let's see it in action 😎
@RelicArms 7 ай бұрын
Thanks buddy, stay tuned!
@CharlesMoore-ve9wp 8 ай бұрын
Could I set up a spread using planer boards with live bait and Mini Mack's, or would the slower speed for live bait (<1 mph) impact effectiveness of the Mini Mack's?
@RelicArms 8 ай бұрын
+@CharlesMoore-ve9wp you absolutely can the mini Mack’s will swim down to about .7-.8 mph depending on current. The biggest difference will be the depth they run at that speed. Works great. If you purchase from us , I have created an extensive depth chart I’ll be glad to help you with! Thanks for watching!
@CharlesMoore-ve9wp 8 ай бұрын
Thanks. I had also posted a question about whether I can troll Mini Macks with my 7" boards? Would appreciate your thoughts on that too.
@RelicArms 8 ай бұрын
+@CharlesMoore-ve9wp I would guess it would work in some cases. Though if trying to pull them faster or in rougher conditions they may struggle.
@CharlesMoore-ve9wp 8 ай бұрын
@@RelicArms Got it. I'll look into adding the 10" boards. Appreciate all of the thoughts.
@RelicArms 8 ай бұрын
+@CharlesMoore-ve9wp we are now able to do custom engraving on boards and lots of other stuff You may be interested in do check out our facebook page to see them Thanks facebook.com/share/p/mvWzHKBmXXJY1Uuw/?mibextid=WC7FNe
@CharlesMoore-ve9wp 8 ай бұрын
I have the 7" Perfect Planer boards used for live bait. I like to use relatively light tackle. Can the 7" boards handle the weight of the Mini Mack's or would I need 10" boards?
@i_s_a_i_a_h 8 ай бұрын
Thanks for the video. Just reached out to him yesterday for a quote. Look foward to seeing you mark some stuff up!
@RelicArms 8 ай бұрын
+@i_s_a_i_a_h Thanks you won’t be disappointed. It’s been great so far
@coastalcustoms123 8 ай бұрын
Thanks for the vid 👍. What was the current and wind speeds?
@RelicArms 8 ай бұрын
+@coastalcustoms123 thanks man I can’t remember the exact wind speed, but it was pretty rough all week because we stayed in shore and didn’t go offshore for any reason cause it was just too windy. Thanks for watching
@michaelgarrett3622 8 ай бұрын
The Savage Gear swim baits y'all used, were they the 7 or 10" and what color? I see they don't off a true gizzard shad color. Thanks and great videos!!
@RelicArms 8 ай бұрын
+@michaelgarrett3622 we were using the 10” primarily that day I believe. We do use 8” alot as well
@OMGLaser 8 ай бұрын
Awesome bro!
@RelicArms 8 ай бұрын
Thanks 🔥
@OMGLaser 8 ай бұрын
The sound is amazing!
@michaelgarrett3622 8 ай бұрын
I see you have a Marine Mat type floor in your boat, how long have you had it installed? I don't live too far from you and always wondered if boots in the winter time or colder months would wear out the foam any? What's your opinion? Thanks!
@RelicArms 8 ай бұрын
hey bud, It had it in it when I got the boat. I like it. It cleans up pretty good and seems to be holding up just fine I believe its the seadek brand