Sketchy Scotsman MTB

Пікірлер

@Titot182 Ай бұрын

When an oriental chap on two wheels gives you advice, heed it! The fact that you had a KTM in the back gave further credence to your post. Found the same screwdriver extension from my draper multi-bit set and a 10mm 1/4" socket. X2 bearing hardware removed, ready to install onto my Bomber CR! Top stuff - saved me £135. Do I care if its tolerances are slightly off? Nah!

@badedit2512 2 ай бұрын

thanks mate worked on my 2018 1290r

@petermordue3245 2 ай бұрын

Thanks it worked

@in.edieudonnesworld3167 3 ай бұрын

Thanks

@JR-ox7ux 4 ай бұрын

This did not reset the date. So the warning light is still on. And I get a service warning still?

@Hilllochflyfisher 4 ай бұрын

Hi you can make a neoprene headset protector for the bottom cup from a neoprene laptop case and Velcro lizard skins make them but I think they only do for standard sized headsets.

@superglwl 4 ай бұрын

Genius. Used your method with 0 hiccup.

@45graham45 5 ай бұрын

Excellent. Just saved me £150 for the rip off Fox tools for this. Many thanks.

@jooliphant 5 ай бұрын

Thank you. I am having problems with a Cube Reaction Hybrid Pro e-Bike headset and this answers the question of why I cannot stop the play and the consequential knock that accompanies it over rough ground. So well explained, it’s really great to see you get to the bottom of the issue.

@MarioGoatse 5 ай бұрын

I replied on your other comment, but in case you don’t see it, I can confirm the Cane Creek ZS56 /ZS56 headset is perfect. It feels so much better. It’s solid now, and the bearings are spinning nicely. I matched it with a Funn Equalizer 50mm stem, as I liked the reach on the original, but it was a little too long. It looks and feels much better now.

@jooliphant 5 ай бұрын

@@MarioGoatse Thank you so much for taking the time to reply, I am determined to get the headset not to knock when i'm off road - I may be purchasing these items shortly.

@MarioGoatse 6 ай бұрын

Hey mate, I’ve got a similar issue with my Cube Reaction Hybrid Pro (Mine is Acros though). My head tube is the same as the Stereo, but my bearings are a ZS44 Top (with a plastic spacer to make it 56), and a ZS56 bottom. I’m upgrading it because the bearings are rusted and gritty, so should I just grab a Cane Creek ZS56 to ZS56? It will fit the 56/56 head tube like yours right?

@jooliphant 5 ай бұрын

same bike, same problem.

@MarioGoatse 5 ай бұрын

@@jooliphant I can confirm that the Cane Creek ZS56 / ZS56 fits perfectly. I removed the old plastic Acros headset, and the newer Cane Creek headset feels a million times better.

@sqeezyx85 7 ай бұрын

just perfect🤌🏻

@romeo1993ua 8 ай бұрын

Thank you! Saved my day!

@InBoostWeTrust7MGTE 8 ай бұрын

This did work on my 2018 DUKE 790 and probably will on all other dukes as well

@OliClothier 9 ай бұрын

Hi, I’ve ordered a new headset from superstar components for the exact model and make of your bike. The top bearing I’ve been sent doesn’t fit over my fork tube. Wondered if you had the same issue or if you recalled the number and top cup bearing size? Mine is about .6 mm to small in diameter. Thanks

@andreid.8347 9 ай бұрын

Salute! by any chance, can you/anyone provide the 3D project file so we can print it out too? Thank you for your videos!

@andreid.8347 5 ай бұрын

Kind reminder!

@defender6754 9 ай бұрын

Worked on 790 Duke ❤

@colinhalliday613 11 ай бұрын

Thank you, much appreciated info 😊

@socalty Жыл бұрын

Concept worked for me. Thanks!

@johnnymoto66 Жыл бұрын

Greatly appreciated 🏁🤙

@rampchamp9283 Жыл бұрын

Do you have a route map for this tour.

@paradox963 Жыл бұрын

Good hack for this, but if you're going to do it very often I would just get the tools from fox, it's much easier.

@45graham45 5 ай бұрын

With the Fox tools you still have to bash them out just the same - but with £150 worth of metal instead.

@maciekczl Жыл бұрын

Under my top cap in Actioneteam 140 from 2020, there were 2 pieces of FSA Micro-Spacer for Micro-Integrated Headset by default, which ensures proper pressure of this plastic ring to the bearing - I don't see anything like that under the top cap in your video. Can these bearings be replaced with, for example, crane creek? They have the same angles but are 1mm lower? Has anyone tried something like this?

@mistatopo8337 Жыл бұрын

Nice job, very easy to follow.

@kingklr1 Жыл бұрын

Thank you sir.

@Craigovideo Жыл бұрын

Information put across very well! Top video I’m going changing mine now 👍🏻

@YB_He Жыл бұрын

It worked on my 23 890R! Awesome!

@giddyrightonup Жыл бұрын

Thank you, this has made my day 👍🏻

@letsgoletsgoletsgoletsgoletsgo Жыл бұрын

im just gonnaa bring it to the shop

@Youtube_Globetrotter Жыл бұрын

Thank you!

@artd2472 Жыл бұрын

Спасибо

@bcddd214 Жыл бұрын

Thank you so much for this.

@BlindIo42 Жыл бұрын

Thank you! The service manual was not clear and said to press up and down for 3 seconds.

@mikesav9 Жыл бұрын

Much appreciated

@snyderryanw81 Жыл бұрын

Awesome!!

@75ajw Жыл бұрын

Really useful video! Got a creaky headset on my Reaction PFM 625 and now got some ideas for what to investigate.

@iainrice1517 Жыл бұрын

Good vid and insight in to issues with the headset, I have the same problems with my CUBE STEREO HYBRID 140 HPC SL 2022 after 6 months, do you no if our head sets are the same size as I would like to purchase the seal bearings in ur vid , many thanks iain.

@sketchyscotsmanmtb9173 Жыл бұрын

Thanks. Are you sure it’s the same problem? The cube website suggests it has an Acros headset in there which I’m sure comes with sealed bearings and also Not the plastic wedge. It does look the same size of headset though. archiv.cube.eu/en/2022/536152

@iainrice1517 Жыл бұрын

@@sketchyscotsmanmtb9173 I think so, bike is at local glasgow work shop for service , ive had to have all the drive train replaced and they are saying bearings need replacing and is not covered under warranty , quite disappointed with cube , so was doing some research to see if any1 else had similar issues.

@iainrice1517 Жыл бұрын

@@sketchyscotsmanmtb9173 yes you are right , had them replaced on Saturday sealed and no plastic , but still failed after six months , thanks again for your insight into this.

@gavinheron1 Жыл бұрын

You make all these features look way too easy. Great video- I ride often at the braes and love it.

@bencummings8389 Жыл бұрын

Well done sir 👍

@microlaxhextril Жыл бұрын

Worked on my 890 adventure. Thanks !!!!

@sparty94 Жыл бұрын

thanks man, this has been driving me nuts.

@justmyself1000 2 жыл бұрын

Thank You!

@Mr4321aldo 2 жыл бұрын

Thank you from Tasmania.

@GNX157 2 жыл бұрын

On the sealed bearings, you can service them if you want. You’ll need a dental pick or an exacto knife to pop the seals out, working on the stationary area of the seal that’s against the outer race. Practice on s9me old seals first if you have any and need the confidence. Once you have the seals off you wish wash them clean using an old toothbrush and some Dawn dish detergent. Dry them and pack with Phil woods hydrophobic grease and pop the seals back on and you’re good to go.

@timothybroga1704 2 жыл бұрын

Thank you

@federaldelii 2 жыл бұрын

💯💯🤘🏻🤘🏻

@gapback 2 жыл бұрын

I think its good to know that this same headset purchased aftermarket comes with proper quality sealed bearings etc. but in a situation like this the OEM manufacturer ordered these headsets with these cheaper components to keep costs down and is not indicative of FSA products.

@marclutz2993 2 жыл бұрын

Music sucks!

@sketchyscotsmanmtb9173 2 жыл бұрын

Thanks love you too man :)

@LooChino81 2 жыл бұрын

3d print file please. My 1 month old Cube has just began to creak....can you load to thingyverse or similar? Thanks in advance.

@obscurazone 2 жыл бұрын

It is most likely that you simply need to tighten up the top bolt / steering nut, and also need to re-grease the bearings. The file he is printing is a very extreme fix, for a semi integrated headset. Getting those pre fitted cups out of the frame is difficult, and if you do it will also void the warranty. I absolutely would not recommend doing it. If you grease the bearings and tighten everything up, but find it still creaks, take it to a Cube dealership. It is only one month old so it is covered for everything that requires any major repair or replacement.

@fuckinellitsraymo 2 жыл бұрын

A very old traditional route (along with gypsy Glen) that was in use long before the Seven Staines was even thought off. The three Brethern route. Normally done as a loop with Caddon Bank at the end. This route has been ridden by riders on manual bikes for years so not just for ebikes. Having rode this on an ebike recently it does show a lack of use compared to a few years back probably as it is considered old school nowadays. I can't say I have heard of many people returning the same way you came.

@K1ngJame5-mtb 2 жыл бұрын

Can you share the brand of that socket extender?

Ең жақсы KZbin

Пікірлер