I have a 2010 Toyota Matrix (basically a Corolla hatchback), and the cruise control switch broke a few months ago. I replaced the switch myself and am very happy with the result. I called a the service departments of a couple of dealers and the customer reps told me it would cost $370 (plus 13% tax) for the replacement switch and an hour and a half for labour at ~$150 an hr. All in, it would have cost about $700 CAD. So, I watched a couple of KZbin videos on how to fix it. It appeared to be 15 minute job, and I could get the part on Amazon for less than $30 or more than 20X cheaper. I did it with the help of a friend who had the tools. Removing the airbag took a little jiggling and a sharp pull. Replacing the broken switch was easy. But replacing the airbag was tricky and instead of 15 minutes it took us closer to an hour. That time was spent in trial and error. Since this issue wasn't discussed on the videos I thought I should mention it here in case someone has the same problem. We finally solved the problem when we looked carefully at the screws and found a "small quirk" involving the 2 screw assemblies that held the airbag into the steering column hub. The airbag screws aren't just screws that come right out, but are held in place by plastic cages they fit into. The screws extend past the end of the threads and the cages push them towards the column so that when they are fully unscrewed, the small extension still holds the airbag loosely in place. And when we tried to reinstall it, the screw extensions in their little cages wouldn't let the screws fit into the holes. The answer was to manually pull on the plastic cages, just a touch, and that allowed the screws to move away from the column far enough that the screw extension could easily slide into the screw hole.

My Backpack loop snagged on mine and snapped it off. I don’t have cruise buttons on my steering column so I assume I won’t need to deal with the yellow and orange cables. Sweet! Thank you man 👍

Finally someone who can speak english and that shows actually how to do it.

Did you need to do anything with the airbag? Did you unplug battery?

I had a pzt zero turn that wouldn't start ended up being the accessory fuse blown.

Do you have the link to buy it, of all the accesories cables included?

I got so fortunate that we have the same exact washer!!!

One of the " best DYI videos" ! This 10 minute fix saved me $ 150.00 great job and a big THANK YOU

Thanx, this fixed mine 😊

Thanks so much for the video. Mine just all the sudden broke off one day. This video turned this disaster into a $15 DIY repair

This video helped me fix my dishwasher, thank you very much!

i just replaced in my 2011 corolla along with a new harness provided but it didn't work, fuse is fine number 19. Is there any other fuse for cruise control.

Just piling on with another "you fixed my issue". Thank you!

screwdriver size?

Thank you so much, solves our issue!

Do you have the part number? I need to replace mine as well. Thanks

Does your zero turn have a keypad?

This is beautiful

I just subscribed!

This worked for me!!! So thankful!!!!!!

This solved my immediate issue but where does the water come from? I need to find the root cause.

Will this be the same for a Samsung dishwasher?

You saved me! Thank you so much.

It worked thank you

Thanks for fixing my car for me!

This was super helpful! I fixed this with my son last week!!