Пікірлер
@dannyphantom9281
@dannyphantom9281 12 күн бұрын
How do I reset the AVR-1601 model?
@DNSWRLD
@DNSWRLD 11 күн бұрын
Doesn't this one work?
@rBennich
@rBennich 22 күн бұрын
If that "insulator pad" is actually an insulator pad, what about the screws that directly connects the transistor grounds to the heatsink?
@AudioTomReviews
@AudioTomReviews 20 күн бұрын
The screw hole is insulated front through to back from the metal.
@secretsquirrel7788
@secretsquirrel7788 23 күн бұрын
Do you have the wiring diagram for the crossover
@AudioTomReviews
@AudioTomReviews 22 күн бұрын
Sorry, no, and I have since given the speakers away.
@tommythetoe
@tommythetoe Ай бұрын
Great video. Thats a good price for that crossover. I have used mattress foam to line the walls of a speaker and it worked fine. Much cheaper then egg crate foam and got same result.
@AudioTomReviews
@AudioTomReviews 20 күн бұрын
I just ordered a 2 pack of "felt dishwasher soundproofing/insulator blanket". Felt is an excellent damping material, I'll see how this works out.
@beesollom-yp1pp
@beesollom-yp1pp Ай бұрын
i was on the phone for 5 hrs theses people DO NOT KNOW THEIR ASS FROM A HOLE IN THE GROUND 11/13/24 DO NOT BE NIAVE
@themountain59
@themountain59 Ай бұрын
Acrylic mats for turntables is the newest snakeoil for "audiophiles".....90 quid for a mat is ridiculous...sorry.
@briangrant774
@briangrant774 Ай бұрын
this is just my opinion ive used both i much prefer a cork matt.
@AudioTomReviews
@AudioTomReviews Ай бұрын
Actually I agree.
@johnsweeney8157
@johnsweeney8157 2 ай бұрын
My tweeter keeps blowing dui to high volumes
@JumbleTasteSpinning
@JumbleTasteSpinning 2 ай бұрын
I have the APM from funk firm (uk), and all i can say that is amazing product and it was worth the invesment. You can clearly hear the difference in sound.
@rickread5902
@rickread5902 2 ай бұрын
Great tips and a great job making the repair. I recently bought/won an eBay auction of a PS-LX510 that works, but I plan on going through electrical repairs as a preventative measure for longevity. Very good video and explanations.
@AudioTomReviews
@AudioTomReviews 2 ай бұрын
It's well worth the trouble to replace all of the electrolytic caps before they go bad and take out other components. Glad you liked the video!
@alonzoperez1969
@alonzoperez1969 2 ай бұрын
Hi i have a problem my yamaha rx v467 everything turns and functions i have it 5.1 surround sound but only the back Left and right surround sound only working, but not the center and front left and right speaker are not working what's the cause of it and can it be fixed i tried mostly everything but the the system looks like nothing is wrong. Can you please give me advice or should i just trash it ? Thanks..
@AudioTomReviews
@AudioTomReviews 2 ай бұрын
Try a factory reset (google how to do it for your model) and or firmware update. Make sure all the speakers are active in your settings. Does it work on pure direct? If all else checks out, it could be a bad DSP chip, replaceable, but may not be worth it. This video gives the DSP test procedure. kzbin.info/www/bejne/nqjRhmqwoNuhZqc
@vesselinivanov185
@vesselinivanov185 2 ай бұрын
My Dual...701...❤❤❤
@Big_ol_bass
@Big_ol_bass 3 ай бұрын
Denon used to be a quality company. Now their hdmi boards go out if you look at the unit wrong.
@MFARAJR1018
@MFARAJR1018 3 ай бұрын
I do not have sim I only the consumer cellar mint mobile eSIM mint mobile I tried that not working it is iPhone 12 maybe I should take it out of the other phone
@MrStarbor
@MrStarbor 3 ай бұрын
WOW!!!
@MrStarbor
@MrStarbor 3 ай бұрын
Great job man... mine does not olay 45 as well
@Talkinshhyt651
@Talkinshhyt651 4 ай бұрын
when i dont have anything to fix i just others do it
@Marcelov079
@Marcelov079 4 ай бұрын
Muchas gracias. Este método me funcionó con un RX-V477. Grateful!!
@bellacharm629
@bellacharm629 4 ай бұрын
Just out of curiosity, I bought a Takmork acrylic turntable mat on Amazon for about a dozen dollars, and thanks to your advice, it was a very worthwhile investment!
@AlphaXiro
@AlphaXiro Ай бұрын
How much is a dozen dollar?
@user-gv7uo2ez8w
@user-gv7uo2ez8w 4 ай бұрын
Hi, do you know the same procedure for RX V775? I need to change model from V675 to V775- thanks
@AudioTomReviews
@AudioTomReviews 4 ай бұрын
Did you try following this procedure? I thought all the "75" models had the same menu system, but I could be wrong.
@user-gv7uo2ez8w
@user-gv7uo2ez8w 4 ай бұрын
@@AudioTomReviews hi I tried but it seams that it's only possible to view data but not to modify...
@AudioTomReviews
@AudioTomReviews 4 ай бұрын
the service manual says "When the DIGITAL P.C.B. or IC82 on DIGITAL (1) P.C.B. is replaced, this unit will display “Internal Error” and will not operate properly. The model name MUST be written to the backup IC (EEPROM: IC82 on DIGITAL (1) P.C.B.) to have proper operation. (For detailed procedure, refer to related Service News or Service Bulletin. Or contact your local Yamaha representative.)" That is the procedure in my video. Did you toggle from "PCB" to "model" before trying? PCB will only show info, model is unlocked so you can change it. Here is your manual, but it doesn't cover the procedure. elektrotanya.com/yamaha_rx-v775.pdf/download.html#dl
@AudioTomReviews
@AudioTomReviews 4 ай бұрын
You can also try a firmware update and see if that gives you the ability to update the model
@user-gv7uo2ez8w
@user-gv7uo2ez8w 4 ай бұрын
​@@AudioTomReviews Hi and thank you. The problem is that the menu SW-PCB doesn't appear. Do you have the Service bulletin? I have the service manual but it seams that it's only possible to read data but not to change it.
@vijaykumarsharma2293
@vijaykumarsharma2293 4 ай бұрын
Hi Tom, I have Yamaha RX-V485. I am facing a issue where Receiver doesn't connect to the router in the 'wired' mode. It does connect in the 'wireless' mode perfectly - no issues here. I have checked for the faulty cable and the router ports. Both seem OK as other devices when connected there work Okay. Any suggestion what could be the issue? Thank you.
@AudioTomReviews
@AudioTomReviews 4 ай бұрын
Did you change it to "wired" in the settings menu?Selects the network connection method. Setup menu “Network” > “Network Connection” Choices Wired Select this option when you want to connect the unit to a network with a commercially-available network cable. Wireless(Wi-Fi) Select this option when you want to connect the unit to a network via the wireless router (access point). NOTE For details on the network connection, see the following: ▪ “Preparing for connecting to a network” (p.29) There are several other network settings possibilities I won't get into, but you may need to manually set an IP address as it may be trying to use one that is already in use by another unit on your network.
@vijaykumarsharma2293
@vijaykumarsharma2293 4 ай бұрын
@@AudioTomReviews Thank you, Tom, for your response. I tried setting up the IP address manually by choosing the wired connection option and turning off DHCP. I provided a new static IP address while keeping the same subnet mask, default gateway, and primary DNS address as shown in the wireless settings. However, the wired connection still doesn't work. The new IP address, subnet mask, default gateway, and primary DNS all show as (0.0.0.0) in the information window under the wired connection. Do you have any other suggestions I could try, or is it fair to assume that the network card might be the issue?
@Aandemaat
@Aandemaat 5 ай бұрын
Thanks for sharing this info. The manual is too long to find this bit of knowledge. I do have a question and I know it's a long shot. I did this because I wanted to fix my receiver freezing after a while but since i did it, it doesn't give any amplified sound output. On full volume it I get the sound of the input very soft and crackly. Does anyone know if I just killed my amp?
@kakarrot62
@kakarrot62 5 ай бұрын
another great video! Awesome work!
@fleuristestation
@fleuristestation 5 ай бұрын
Juste wow merciiii beaucoup
@Amkooo1987
@Amkooo1987 5 ай бұрын
Hi, First of all I wish u luck solving all the issues that You faced with this great turntable, I have one as well. I am planning to replace capacitors too, if You have time I would appriciate if you could post the list of all capacitors that You had used, I also think that this turntable deserves best possible parts. I live in Germany so it should be easy to find suitable capacitors. I hope video no. 2 will cover replacing Sylicon oil, because I'm quite unsure how to do it properly. Great job so far, and I look forward to part 2. Greetings from Germany 🖐️
@AudioTomReviews
@AudioTomReviews 5 ай бұрын
Thanks for the comment, I hope to get over there one day as it was my great grandfathers birthplace. The good news is everything is done I just have to compile the video, the bad news is I showed how to replace the damping fluid on the lift but it didn't help. I may not have had the right oil or I didn't use enough of it, but the topic is covered. It's an amazing turntable (I still own my Dual 1257 I purchased in 1983) and I am planning other videos that will feature the 714. I will try to find the capacitor invoice and add it t the video for you.
@TOMMY-kd1ed
@TOMMY-kd1ed 6 ай бұрын
i have a amply reciver sony STR V626. I cant control on the front device. help me pls. Thank you
@johngomes2005
@johngomes2005 6 ай бұрын
I have a rxv 475, i switch on but automatically switch off after 4 or 5 second
@AudioTomReviews
@AudioTomReviews 6 ай бұрын
It's protecting itself. Unplug all speaker wires from the back of the unit and see if it will turn on. If it does you have a bad speaker or speaker wire, if it doesn't then you have an internal problem
@johngomes2005
@johngomes2005 5 ай бұрын
@@AudioTomReviews thanks sir
@xharkBM
@xharkBM 6 ай бұрын
Thank you it works on my RX-V475 (firmware 1.34)
@yormajesty
@yormajesty 6 ай бұрын
Have a AVR 4306 (Don't have remote) can't get any sound, don't see it on your list though.
@AudioTomReviews
@AudioTomReviews 6 ай бұрын
Sorry, that's not a model I'm familiar with.
@yormajesty
@yormajesty 6 ай бұрын
@@AudioTomReviews Okay, Thanks Anyway
@andrewpadilla5893
@andrewpadilla5893 6 ай бұрын
Same problem different model
@COUNTRYANDY65
@COUNTRYANDY65 6 ай бұрын
Top notch buddy i amost bought an acrylic platter thanks to your advice i didnt waste my money on this!! Congrats!
@7prs965
@7prs965 6 ай бұрын
An acrylic PLATTER is way different and far superior than an acrylic MAT that he's demonstrating in this video.
@imperialdagger
@imperialdagger 6 ай бұрын
Anyone know reset procedure for avr-1700? I’m stuck in standby. Manual doesn’t show. Thanks!
@davidevans1128
@davidevans1128 6 ай бұрын
Same here I hate these Denon receivers this is the third damn one I've had and they're all junk when it comes to this I don't care what anybody says these things are just too finicky. I TOO HAVE AN AVR 1700 I'VE BEEN SEARCHING FOR 2 AND 1/2 HOURS ONLINE WITH NO LUCK... ON HOW TO GET THE DAMN STANDBY OFF!!!
@AudioTomReviews
@AudioTomReviews 6 ай бұрын
It could be in protect mode. First thing to check is unplug all speakers from the receiver then try turning it back on again, If it comes out of protect mode, then it's a bad speaker or speaker wire. If not then the problem runs deeper.
@imperialdagger
@imperialdagger 6 ай бұрын
@@AudioTomReviews thank you for your advice. 😃
@AudioTomReviews
@AudioTomReviews 6 ай бұрын
Oh, here you go, factory reset for your model on Denon's site: manuals.denon.com/AVRX1700H/EU/EN/GFNFSYvyalrwrt.php
@aosperoni
@aosperoni 6 ай бұрын
Listening from KZbin, I don't notice an "improvement" compared to the original... The upgrade took away the bass. The treble improved logically due to the change of tweeter. The mid frequencies do sound clearer. It sounds different, but for me not necessarily better... But the important thing is that you like it!! That was the goal. Beyond tastes, very good video, very neat work and explanation!!
@AudioTomReviews
@AudioTomReviews 6 ай бұрын
Yeah, it's really hard to capture the difference with the current equipment I have. I need to get a mixer and 2 good mic's, hard to justify right now. The bass is what really wasn't captured the way it needed to be (and the recording is in mono). The "before" bass was more prominent, but extremely low quality. Boomy, boxy hollow sound, not good. After was articulate, clean and well defined, but that made it seem like there was less. I kept the eq the same for comparison, but they would handle a bass boost much better afterwards. I am slowly upgrading my equipment warchest and hope to bring better samples in the future. Thanks for the post!
@SlowCarsFastSFV
@SlowCarsFastSFV 7 ай бұрын
USB to TRRS adapter with an extension TRRS to TRRS cable makes it far easier. Also, having your test files on a USB stick plugged into the car makes it much easier, too. I used pink noise and some Michael Jackson files and sat in the back seat making adjustments on my DSP. Also.. don't sweat minor noises.. listening environment is never perfect. I just do it a couple times in different sessions and then give a final listen or two by ear.
@AudioTomReviews
@AudioTomReviews 6 ай бұрын
I will give the USB/TRRS adapter a try. I have not been able to find 3.5mm TRRS cables that didn't seriously degrade the sound. (well, at a reasonable price anyway)
@antoniolupo3873
@antoniolupo3873 7 ай бұрын
Hi how i can factory reset my Denon AVR390? Thanks!
@AudioTomReviews
@AudioTomReviews 6 ай бұрын
Here under "resetting microprocessor" www.manualslib.com/manual/814558/Denon-Avr-390.html?page=33#manual
@djfredy1716
@djfredy1716 7 ай бұрын
thank you. you helped me a lot. the exact same thing happened to me, i just couldn't figure out why i.postimg.cc/8ktP1mRn/k-ivky-bas-k.jpg
@OnlyAudio-jn1zm
@OnlyAudio-jn1zm 7 ай бұрын
Excelent work!
@AudioTomReviews
@AudioTomReviews 7 ай бұрын
Thanks!
@TD402dd
@TD402dd 7 ай бұрын
If you have the typical $200-350 turntable, who cares! If you have a$1000 - whatever, then you need an acrylic platter. My $1300 Thorens has a metal platter that is nicely balanced, but with my line contact cartridge the rubber mat versus a good acrylic (without the problems stated) has a more isolated sound, indicating it isn't picking up vibrations externally. You should add the quality of the turntable, and the type of cartridges used makes a difference. The quieter the electronics used, the more the turntable benefits. We've done a blindfold test with the same records, and all my friends can tell when the acrylic mat is used. On my Rega with heavier acrylic platter (private English made), the difference is more pronounced with a richer midrange and less noticeable distortion. This stuff isn't cheap, so determine the quality of the system and turntable before buying a high quality acrylic platter (turned, not molded), and so perfect you can't see the rotations. Sensitivity of speakers, especially with ribbon tweeters, also makes a difference. You should always remember it's the total system that gives the quality of the sound.
@AudioTomReviews
@AudioTomReviews 7 ай бұрын
Ideally an acrylic mat should be made model specific to a given TT, and there are some out there. There are so many variables with different TT's that it is hit or miss for the consumer, and that is probably why we see so many different review from good to bad.
@josebaaz7461
@josebaaz7461 7 ай бұрын
I got free pair of Sony ss u601av 3 way towers and decided to make some improvements as well. I braced the inside and changed the tweeter with an infinity tweeter pair I had laying around. And changed the mid range . I lined the wood inside with carpet cushion mat and also use poly-fil . I didn’t use to much ploy-fil because the speakers cabinet are ported . Now I have a good looking set of vintage speakers that don’t sound bad . I was dumbstruck when I realized they sounded better than my advents and infinity Rs 4000 . One little experiment I did with the poly-fil since all the drivers are installed 1 1/2 “ on top of each other I tried using different amounts of poly material behind each driver to the ports and it made the bass sound cleaner and not interfere with the mid and highs coming out the speakers. The sound stage improved significantly .
@AudioTomReviews
@AudioTomReviews 7 ай бұрын
If I had to choose one thing to improve a speakers sound, it would be damping. Glad your speakers turned out so nice!
@CharlesDowiot-qv7pp
@CharlesDowiot-qv7pp 7 ай бұрын
Mine are from 1976 Kenwood kl888 and they are working Excellent maybe 🤔 Because the Pledge furniture polish 😂
@AudioTomReviews
@AudioTomReviews 7 ай бұрын
I'll post a video with audio samples "With Lemon Pledge......Without Lemon Pledge"
@CharlesDowiot-qv7pp
@CharlesDowiot-qv7pp 7 ай бұрын
@AudioTomReviews pledge furniture provides a condition spray light on clean cloth around the outside of speaker provides protection from wear works best on rubber surround and nylon also good for aluminum woofers and polypropylene
@bisarowood
@bisarowood 7 ай бұрын
nice , I just picked up the same unit , and it's dead !! nothing happens when I push the power on ... is there a fuse anywhere ? I can't see one ...thanks
@AudioTomReviews
@AudioTomReviews 7 ай бұрын
Not one that I remember, but there are two of those ICP10 circuit protectors. I only blew one of them, maybe you blew the other one or both. Unsolder each one and check it for continuity. If one is bad replace it as well as all of the electrolytic capacitors. I hope that works for you.
@jeffreywillner7672
@jeffreywillner7672 7 ай бұрын
Great now how do I turn up or down the bass?
@AudioTomReviews
@AudioTomReviews 7 ай бұрын
I don't have it now, but I think you have to control that from the remote.
@zimmsrx
@zimmsrx 7 ай бұрын
Any idea why my tone arm go down? The weight goes down like yours, but the actual needle arm won’t move. I must be missing a linkage but I can’t see where it might be.
@AudioTomReviews
@AudioTomReviews 7 ай бұрын
Ouch, without seeing it is is hard to tell, make sure nothing is binding and no spring has come loose.
@gcmmidwest
@gcmmidwest 8 ай бұрын
😘
@juliocesargonzalez8590
@juliocesargonzalez8590 8 ай бұрын
Good morning everyone!! Could someone tell me if it is possible to configure this receiver from the front panel? I just bought it but it doesn't come with the remote control, and where I live it is very difficult to find it... the receiver is the DENON AVR-3312CI
@mattharwood4413
@mattharwood4413 8 ай бұрын
I got a good quality mat (the Acromat by the Funk Firm) for my Rega. Rega does not recommend a weight or record clamp. My 10 y/o Rega was sounding a bit dark, lacking openness and detail in the upper mids. The cartridge was a good one and new) I tried a cork mat but it made the bass more pronounced but did not open up the sound or allow more upper-mid detail. So upon recommendation of another KZbinr, I tried the Acromat. It opened up the sound (vs the wool stock mat) and allowed more upper-mid detail to emerge. What a difference. I was shocked. (I was shocked at the cork mat too. I just didn't like the effect). I think the two other factors that determine the effectiveness of mats are the specific turntable including platter material and the quality of the mat. That's why higher end manufacturers are using Delrin platters. Rega is using ceramic on its high end tts now. A lot of manufacturers use wool mats, even Rega. They are more neutral sounding. Mats making a difference in sound...I would have thought it was ridiculous three years ago.
@AudioTomReviews
@AudioTomReviews 7 ай бұрын
I would take a wool mat over a poorly coupled acrylic any day.
@mattharwood4413
@mattharwood4413 7 ай бұрын
@@AudioTomReviews That's probably true. A poorly coupled one is no good. I got a Funk Firm and it is solidly coupled to the platter via thin tack strips.
@redneckcoder
@redneckcoder 4 ай бұрын
Thats because Rega uses weak ass motors and belts that can barely keep a 12" record spinning against the friction of a stylus.
@NgawurkuAsal
@NgawurkuAsal 8 ай бұрын
How to reset the remote only? Please
@onesikm3
@onesikm3 8 ай бұрын
Hey Tom is this microphone worth buying as of today do you recommend i save the extra few dollars and get this instead of the umm6 ? Did you finally perfect connecting it to the laptop with rew?
@AudioTomReviews
@AudioTomReviews 7 ай бұрын
UMM-6 is really the way to go. The IMM-6 is cheap but has drawbacks. The biggest is all the 3.5mm trs/trrs cables on the market suck. They are noisy and degrade the sound, so I plug directly into the PC. This will get the job done in the basic sense, but I will be upgrading. It does work with REW fine, but in a clumsy way.
@NickP333
@NickP333 9 ай бұрын
An acrylic mat is good for setting anti skate, but sound wise, they’re not for me.
@bluemantom77
@bluemantom77 9 ай бұрын
I have the same Sony Domi digital surround receiver got mine in 1998 add nobody beats the wiz $499.99 came in a remote with an LCD screen still works only issue I had back in 2009 was the the display light went out disconnect the front panel and pull the cable gently control panel which reset the whole display works 100% also I don't push the power high so strain on the caps. ( Long time since I seen it fully decked out of the original what's the sound of a headphone jack
@richardelliott8352
@richardelliott8352 9 ай бұрын
instead of a weight, I prefer a well designed record clamp, because I never wanted extra weight on the platter bearing, and figured a clamp serves the same purpose .. I use the Michell clamp now, but others have worked well in the past, including a five dollar plastic one from the now defunct radio shack . the Michell clamp is made of Delron, a hard material they say has the benefit of closely matching the resonance of a vinyl record, if that matters, and which they also use in their turntable platter, without a mat. When the presenter mentioned the ceramic platter has a sharp edge , that was enough to satisfy my product curiosity, because that edge is not consumer friendly, and will stay that way, like a ceramic knife.
@AudioTomReviews
@AudioTomReviews 9 ай бұрын
I may look into a clamp. Some turn table motors won't handle the added weight. Clamps were pretty scarce for a while but it looks like more options are available.