if i buy the Two Trees SK1 CoreXY 3D Printer With Enclosure Kit do i need to do everything in the video or dose the kit come pre installed with the printer

Is the door glass? Thanks

No idea if these comments are real. Still waiting for my T1 pro to be delivered and not sure I made the right choice. The price was good at least.

I really dig the attention to detail, man, your full print videos show some real authenticity, which is rare these days, keep going!.

The assembly process was really detailed, and it was super helpful. I’ve subscribed, and I think I’ll be using it.

from benche to pumpkin lto vases, its versatility seems great. Maybe it can handle different types of models with ease. It just looks reliable

Comprei uma e não funciona o lança laser o que fazer,?

Unboxing and test prints looked solid, looking forward to more shares, and more model ideas with your T1!

how to buy this product

Excelente muchas gracias da una idea de como armarlo

As someone with two years of experience, I highly recommend avoiding GRBL-based control boards. They often encounter random stopping issues, which can be incredibly frustrating and time-consuming, especially during CNC operations. Despite upgrading my stepper driver to the BT6600 and trying multiple solutions-such as upgrading the firmware, replacing the control board, and using different CNC software, changing usb cable, changing firmware, changing speed, changing power supply, supply voltage, usb settings, by running on different speed, Applying ground to machine body, changing usb cable, changing different current and precision settings from stepper driver, the problem persists. Unfortunately, this is a problem rarely discussed on online platforms, KZbinrs mostly show good part of there's project only rather than ground reality,such a worst random stop problem can completely disrupt a job when the machine unexpectedly stops during cutting. If someone have solution for this, please don't hesitate to reply back!

покупал в официальном магазине, в Европе в начале сентября у меня сразу приехал с последними обновами v2.0.2.17 и версией прошивки v3.22

พัดลมนีีช่วยอะไรบ้างหรอครับ

My robot has a connection problem, the raspberry is working, but the leds of the screen are not turning on, and it doesn´t move with any of my instructions (on my blockly), how can I solve this?

Hari aja

Donde lo consigo?

Please tell me are there any CNC routers agents in various countries?

can cut acrylic plexi glass 3-4mm with 80w 775 spindle ?

please can the add-ons also be attached on mbot 1?

Very cool, how long would you say assembly took?

Can this cnc print to cut?

What a useless robot dog, can it carry grenades or a rocket launcher? :))

Can I install multi-color printing here ?

I'm looking for such a device. I really like the design of it, and the speed of work with print quality. And where did you order, is there a link to the store?

Could I use this to cut out signs and also various designs for cutting boards? Looking for something to compliment my 55w CO2 laser.

sound is horrible

Amigo, sabe qual a voltagem para alimentar esse spindle 500w?

Françis

Thats an Ardunino nano, not a pico

i got the new mbot2 channell link @Col468

maybe don't call it a review if its not actually review?

Hi, where can I buy mbot2 speaker module?

Excelent!

I'm posting this anywhere there's a video or article about the TwoTrees TTC 450, as a warning. I thought I'd share my experience with TwoTrees service, in case anyone is thinking about buying one of these things. I purchased my TTC450 from Microcenter, and the same day purchased the 500 watt spindle motor on Amazon. It took me about a day (off and on) to assemble the CNC itself and get it ready for the upgraded spindle motor. The motor came in the next day, and I got it all hooked up and upon testing it...NOTHING. Not even a blip. Sent some emails to TwoTrees, and eventually got a reply asking me to TAKE A VIDEO OF THE PROBLEM TO SEND THEM. Wow. Never seen THAT kind of nonsense before. So I take a video, figure out a way to upload it to them, and their next response is to instruct me to disassemble the power supply (!) and jumper 2 wires to bypass the relay. Wow. HUGE red flag there, asking a customer of your product to take it apart and perform an operation that obviously voids the warranty and kicks it right out the door. Not including the SAFETY CONCERNS. So I went through all that, sent them ANOTHER video of the result (getting REALLY tedious by now) and then I wait... And I wait...and I wait...and eventually like about a week later send them another email asking when I might be receiving my new power supply. Because the brand new one is obviously bad, right? Well, I got an email today informing me that they're sending me a NEW RELAY. Which is to say, not only did TwoTrees ask me to disassemble sensitive electronic equipment, now they're actually asking ME to FIX IT. When the original that THEY SHIPPED was CLEARLY UNTESTED AND DEFECTIVE. Gee. Sending me a new relay so I can operate on my brand new equipment that doesn't work. Thanks, TwoTrees. So, ordering from TwoTrees, know several things. 1: There is no QC process during manufacturing, and you may receive defective equipment from the get go. 2: TwoTrees has NO QUALMS about expecting the money-paying customer to do extensive repairs to otherwise new equipment to make it work, despite any potential safety concerns about working with high voltage equipment. 3: TwoTrees will do the ABSOLUTE MINIMUM to get your product repaired for you, requiring you to perform delicate and complex operations you should never be asked to do. In short, my experience with TwoTrees has been an absolute NIGHTMARE, and had I known before hand, I would have purchased something else. I recommend everyone take a good, hard look at the company you intend to buy from.

Video great, music is terrible.

This a little late but it may help new users that find this video. The wires rubbing against the frame is because the drag chain is attached too far forward on the Y axis (1:07) . The rubbing cable that comes out of the end needs to bend back to connect. It can't bend back with enough slack to keep it out of the way of the fame when tied to the side of the upright . Unsnap a couple of bars (not the entire link) from the top of the Y drag chain to release a little more cable. This will let you wire tie it to the back of the upright instead of the side. The video on the SD card shows the cable tied to the back not the side. The cable doesn't get in the way of the limit switch when tied this way (tested). Love you videos thanks for everything you share with us.

you damm genius I liked this video💜

jesus... shitty loud music

What's wrong with the sound/music?

ดูรายการนิลมังกรเมื่อกี้ ยินดีกับแชมป์ด้วยครับ สมแล้วที่ได้รางวัล สุดจริงๆ

i want ingredientics 😁😄😃😀😅😅😅😅😅😅

what is the highest speed of 500w motor. Does it have ball bearings?

How much cost this cnc router

$1000 for a small robot that uses servos instead of stepper motors I dont think so.....this shaky weak robot is NOT worth $1000

great job!

Do you have Code you could share? I would love to try this out!

Did you get the simulator?!

Did you complete the programing !

Sir which sensor r u using

Sir which sensor ur using