This is not really a video about how to install the hitch, but an advertisement! Very little detail, no mention of tools needed, explanations etc.
@melonlab802 күн бұрын
I would love to see this pulling a 5000lb trailer up an incline 😂
@jaredp193 күн бұрын
You guys need to make a plastic piece that covers the hole showing the bolt. It would look 10 times better, sleeker, and prevent theft. You can literally just steal the thing by unscrewing the bolt.
@implausiblegrrl6 күн бұрын
Is this compatible with the 2023 CR-V Hybrid?
@torklift_central6 күн бұрын
Yes it does
@omggreenleaf9 күн бұрын
Can you put it on an xse hybrid
@torklift_central7 күн бұрын
Yes you can
@flamingrice722712 күн бұрын
Will it support a yzf 250 dirt bike
@torklift_central10 күн бұрын
This hitch supports a tongue weight of 525 lbs at the trailer ball. Please keep in mind that every 12" extended from the trailer ball results in about a 30% decrease in tongue weight. Your vehicle may also be rated lower than the hitch. Be sure to consult your owner's manual for more info.
@mrnonpc988515 күн бұрын
Looks like a good quality lift, but at the hight you have the bike lifted to it blocks the taillights.
@aren5555517 күн бұрын
What prevents someone from unscrewing the bolt (pictured at 4:54), removing the receiver drop-down part, and making off with my trailer/hitch accessory? Is there a way to lock the hitch drop down to prevent this?
@torklift_central7 күн бұрын
The EcoHitch is equipped with an advanced anti-theft security bolt. We know that it works because we have not encountered our customers needing to order a replacement receiver due to theft.
@avanors17 күн бұрын
I'm sure you can do better then That.
@Dragonborn666617 күн бұрын
This took a lot of cooking I bet, truly unique!
@kyleperez524118 күн бұрын
Is it a class III hitch?
@torklift_central14 күн бұрын
The tow rating depends on the part number
@kyleperez524114 күн бұрын
@@torklift_centralis the stealth hitch for a 2024 VW GTI class III?
Is this being installed on a model with the factory tow prep package already installed?
@markricharddavies25 күн бұрын
This is fantastic, I’m going to order
@torklift_central25 күн бұрын
Thank you for the support!
@ratha866525 күн бұрын
This fit 2024?
@torklift_central25 күн бұрын
It does not. We are releasing a new part number for the 2024 model year. Details to come.
@hojushigolsaneunsaramАй бұрын
Will you be exporting this internationally? I live in Australia.
@torklift_central28 күн бұрын
We do not currently ship directly outside the US or Canada. We've had good reports from our customers that use a shipping forwarding service called BonVu.
@samgoldfish4806Ай бұрын
holly shit....thats a lot of work
@HandirifleАй бұрын
Its better to loop around the front fork between the fender and fork. No load on suspension, thus no chance to dome loose when bike bounces,cand absolute tight.
@ijustwannaseethevidАй бұрын
Can this product be installed without lifting the vehicle?
@torklift_centralАй бұрын
It is recommended per the instructions that you use ramps or suitable jack stands to lift the rear of the vehicle for installation.
@sixdollarfrogАй бұрын
Do you have one that will hold a predator 5500 generator? 2022 f350
@torklift_centralАй бұрын
What are the dimensions of your generator?
@hightower2537Ай бұрын
any idea if this will fit a 2023 Bolt EV?
@torklift_centralАй бұрын
No it will not
@RICARD01Ай бұрын
Thats super....too bad they already tapped the bumper. Lol
@jasonchappell5297Ай бұрын
The link takes you to a trailer hitch.
@torklift_centralАй бұрын
You're right. I updated the link in the description!
@nomansland48112 ай бұрын
What does Airstream say about this? Some say Airstream does not endorse racks or extra weight on the back of the trailer.
@torklift_central2 ай бұрын
Hi there, we developed this hitch because our local Airstream dealers asked us to and it has since become a hallmark product over the years. Our Airstream and non-Airstream dealers frequently purchase this product and have given us positive feedback on the use.
@rijoshj2 ай бұрын
what do you suggest to remove the wheel arch phillips head screws without the snap on attachment?
@torklift_central2 ай бұрын
In the video they use a 90 degree adapter for a drill. You can also use a short screw driver
@rolandobrooks89032 ай бұрын
I need this in my Lyfe
@torklift_central2 ай бұрын
It's a game changer!
@nickjacobsss2 ай бұрын
This is such an awesome design
@torklift_central2 ай бұрын
Thanks so much!
@paulguzyk29782 ай бұрын
Do you have an estimate for labor time a shop would take to install the hitch?
@torklift_central2 ай бұрын
Hello, it should take about 2 hours.
@bertrandrusell73462 ай бұрын
I am also looking for a hitch for my Kia Carnival. Thanks for the informative video! My understanding is that, the hitch is installed to replace the rear crossmember. Please correct me if I were wrong about it.
@torklift_central2 ай бұрын
That is correct!
@lucpoirier28832 ай бұрын
Is it good to hold one bicyle 30pounds? 4 6mm bolts. 🤔
@torklift_central2 ай бұрын
This hitch is rated for 300 lbs tongue weight at the trailer ball. As long as you are staying within the capacities of the hitch and vehicle, you should be good to go.
@Gwalkk2 ай бұрын
What’s the best way to prevent water from getting inside the bumper
@torklift_central2 ай бұрын
The bumper isn't completely sealed on the car from the factory. You will not see more water inside of the bumper than you would normally.
@cvillaviray2 ай бұрын
Who installed this in Seattle?!?
@torklift_central2 ай бұрын
This was installed at our retail product development center in Kent, WA.
@Tabil452 ай бұрын
Hi, I’m in the market for a hitch for my 2024 Carnival, I’m interested in your tow hitch because it’s hidden and looks really clean once installed. I’m planning to install this item myself, question: Do you have a diagram where you guys cut for the hitch mentioned @4:40? Thanks in advance.
@torklift_central2 ай бұрын
Hi there, we do have a diagram in the instructions that shows the trimming. If you send us an email at [email protected], we can send you a copy of the instructions.
@oukastoukast2 ай бұрын
Over priced
@jeffersonosias5162 ай бұрын
I need one
@torklift_central28 күн бұрын
Good news! They are available on our website - torkliftcentral.com/the-law-honda-cr-v-sport-touring-front-license-plate-bracket
@brandonhayes74293 ай бұрын
is the process the same for the hybrid?
@torklift_central2 ай бұрын
It sure is!
@HomerSimpson-nu4qg3 ай бұрын
What about the Kick Sensor?
@torklift_central2 ай бұрын
Hi there, the kick sensor would remain intact for this.
@HomerSimpson-nu4qg2 ай бұрын
@@torklift_central Mounted in the factory location? Thks
@cowelldad3 ай бұрын
I cannot figure out how to get the crossbar into place. It gets hung up on the metal tabs that the bumper struts attach to
@torklift_central3 ай бұрын
Are you ready to take you overland adventures to the next level? Our custom storage solutions are meticulously crafted with high quality materials to make the best of your off grid adventures. Call Torklift Central at 253-854-1832 today to talk about your options!
@eliasmichalopoulos15953 ай бұрын
Do you have one for a 2015 gti ?
@torklift_central2 ай бұрын
Our EcoHitch for the 2015 GTI is a Hidden design so the cross tube is concealed and the receiver is visible when not in use. You'll find it here - torkliftcentral.com/trailer-hitches/rear-mounted-receiver-hitches/ecohitch/volkswagen/golf/2015-2017-volkswagen-golf-ecohitch
@Hexum0643 ай бұрын
Nice video. Left out a few important points of info. -The bottom facia and bumper facia come off together. -The bottom facia is bolted to the bumper facia (at least on 2018+). These bolts are not accessible until the bumper and facia are removed. -There's a third bolt towards the front on the bottom facia under the felt panel between the two other forward bolts -There is a small screw on each side inside of the wheel well that attaches the bottom facia to the fender (hex head)
@southerngal78993 ай бұрын
Almost 5 mins of wtheck?
@Joe-co5pg3 ай бұрын
Hi, Is it fit on 2024 RX350 F sport? thanks
@torklift_central3 ай бұрын
Yes it will
@danielfelix213 ай бұрын
Is the small piece that covers the rectangular hole on the bumper when the receiver is not being used, sold separately? If so, what is the part number?
@torklift_central3 ай бұрын
Hello, this piece comes factory with the vehicle.
@eb-ol4po3 ай бұрын
My owner’s manual says trailer towing should not be done
@torklift_central3 ай бұрын
Many of our customers use a trailer hitch to carry a bike rack or a cargo tray.
@e6ensperception4 ай бұрын
How did you mount this front reciver hitch? I cant find any in my area
@torklift_central4 ай бұрын
Hello, what's the year, make, and model of your truck?
@stevenmckiernan4 ай бұрын
What license plate flip bracket is that? Link?
@torklift_central4 ай бұрын
Here is the link to the flip kit - torkliftcentral.com/universal-license-plate-flip-down-kit . If you purchase the x5000s kit, the license plate bracket is included.