No sound when starting it with asio, funny how many ppl got this problem.
@tonegarage4491Күн бұрын
Check on the IK Multimedia forum they can help with any A5 issues :0)
@ritupabankotoky18 күн бұрын
Thank you sir.
@tonegarage449117 күн бұрын
Glad to help!
@Marlon5kАй бұрын
yes, thanks BUT! How can I use the live set and restrain my unit to a certain set??
@tonegarage4491Ай бұрын
Could you explain a bit further! Thanks
@PaulChoate-s4vАй бұрын
Can presets be re-ordered?
@tonegarage4491Ай бұрын
Yes I tend to to save one to a free slot further down and then move it to its new slot, but If you’ve got all your presets saved on your computer you can just import whatever you want into your chosen location
@JohnRBoothАй бұрын
Thanks. Quick question, (I have the HX Effects) once I place the volume block at the end of the effects chain like you did can I assign it to an expression pedal (exp1 or exp2) and then control the volume that goes to the front of my amp? If so, what least expensive expression pedal do you recommend? Thanks again
@tonegarage4491Ай бұрын
Yep you should be able to assign volume to a plugged in expression pedal, I don’t have a HX effects but I’m sure it’ll be easily possible, Rob
@JohnRBoothАй бұрын
@@tonegarage4491 Thanks Rob
@grahamstrangward9422Ай бұрын
Brilliant- thank you.Maybe one more thing to add is that once the settings are set under the phrase loop knob you can pretty much select any other effect so using it as an extra pedal effectivly...Rocking.
@tonegarage4491Ай бұрын
Thanks
@milkcat4855Ай бұрын
maybe im stupid but ive had this for months and this was so overly confusing to get out of. if i didnt have this video i wouldve never figured it out
@tonegarage4491Ай бұрын
Glad to help, it happened to me so thought I would share the goodwill! ;0)
@kalaharithorn2 ай бұрын
Could I use a Tonex as an amp and connect it to the Pod Go just for the effects? How would I set the chain in the Pod Go? Thank you!
@tonegarage44912 ай бұрын
Absolutely! Which effects from the Pod Go would you be using?
@kalaharithorn2 ай бұрын
@@tonegarage4491 Thanks! The Tonex has a couple, like reverb, compression. I think that mostly all from the Pod Go (including modulation, delay), unless I prefer the sound of the reverb and compression from the Tonex after I try them in both units.
@kalaharithorn2 ай бұрын
Oh, and overdrives! Both units have them. I wonder if I would be able to choose an overdrive form one unit or the other or just use from the Tonex or the Pod Go.
@tonegarage44912 ай бұрын
You could put Tonex in the pod go loop for that if you want to use the devices too I guess
@jeffryanamarillo73482 ай бұрын
Thank you for this sir 🙂
@tonegarage44912 ай бұрын
You’re welcome hope it helps! Rob
@Jan-wm5mw2 ай бұрын
Greatings from Poland i stucked ! 🫵❤️⚡🎸 Thank You
@tonegarage44912 ай бұрын
Glad it helped!
@cedric53232 ай бұрын
In my plugin I don't have the settings and metronome buttons on the bottom left of the plugin. How did you get them??
@tonegarage44912 ай бұрын
I must have maybe had a previous version when I did this video I guess will have a look again and see if I still see the same layout on mine
@zakariali79272 ай бұрын
Hello i have an issue with the technology setting. When i want to select asio it doesn’t work . I tried to install the presonus universal control but it keeps saying that its for windows 10 and 11 2h22 or something like that. And i have windows 11 on my pc . What should I do ?
@tonegarage44912 ай бұрын
Hiya buddy best to open a support token with IK Multimedia on this one
@quincy29163 ай бұрын
Thanks
@tonegarage44913 ай бұрын
Welcome!
@uglyguitarguy3 ай бұрын
This is great, but I also still want to use my expression pedal for wah when needed, and when I switch the wah on and rock the pedal back, it still turns the tuner on. Any thoughts on how to get around that?
@tonegarage44913 ай бұрын
Can’t think of one, yep probably best to use the standard tuner method when the wah is used as opposed to only for volume pedal. Cheers, Rob TG
@3kkousedflash2464 ай бұрын
sooo i have an issue i cant find a solution for anywhere if i let my output lvl drop to 0 or if i just started playing the first note doesnt come in till like half way through it does it with all the models but doesnt do it with the guitars straight input on my audiobox i cant seem to fix this if im already playing and riffing i dont have delay or noticable latency
@tonegarage44914 ай бұрын
Best to open a support token with IK buddy they’re really good at troubleshooting issues
@speelbergoMF4 ай бұрын
Excellent. Thank you
@tonegarage44914 ай бұрын
You are welcome!
@justinerenzullo4 ай бұрын
Hi there, Just wondering is there a way you can hard press the expression pedal to activate the whammy in that patch, instead of pressing tbe ctl1 button? Nita strauss has this set on hers and im trying to figure out how she does it. For example on my lead patch, id like to hard press the pedal to activate wah, then on my Rhthym patch id like to assign a whammy when hard pressing. Hope that makes sence! Thanks
@tonegarage44914 ай бұрын
Yeah if you assign EXP SW to whammy on and off and make sure the volume pedal EXP1 isn’t on volume as well as pedal bend that should do it
@badazmofkr4 ай бұрын
You Legend. Thankyou
@tonegarage44914 ай бұрын
most welcome!
@tracyharrell1805 ай бұрын
ASIO setting doesnt work any Idea why. I found something called ASIO4all butw sites are full of unwanted browsers ads etc but no download for ASIO DRivers or anything. what can I do? ASIO tech doesn't work
@AndyHarrison19635 ай бұрын
Yes, you can in normal "patch" mode, but in manual mode the Phrase Loop assign doesn't work.
@tonegarage44914 ай бұрын
Thanks
@AndyHarrison19635 ай бұрын
Hi - Does this work if you then put the GT100 into manual mode (by pressing Bank Down & Bank Up simultaneously)?
@tonegarage44915 ай бұрын
I think so yep , it’s a while since I had the unit , but I’m sure you can pretty much assign each switch to any option
@DelawareSongs5 ай бұрын
thanks!!!!!!!!!!
@tonegarage44915 ай бұрын
You're welcome!
@DelawareSongs5 ай бұрын
excelente video, can i ask you a question? how can i do the same in the video, but using exp1 sw? I would like it to turn on and off when I press the pedal to the floor.
@tonegarage44915 ай бұрын
Hiya yep if you go into the control assigns for the preset and change the EXP1 SW to wah ;0)
@jtotheulian7085 ай бұрын
how do i stop the white noise, according to another comment you have to own one of the digi amps or else you get white noise every 5 seconds, do you know how i can get it without paying without the white noise
@tonegarage44915 ай бұрын
Yeah the white noise plays when you load in an amp, cabinet or effect you may not own in your package
@RabihSaadguitars5 ай бұрын
Can you use x2 fx2 or x2 fx1 in a single patch... I want to use a Univibe and a phaser for example.
@tonegarage44915 ай бұрын
Hiya you can only use one effect from each individual FX block, one from fx1 and one from fx2 but you may be able to find univibe in fx1 and phaser in fx2 or vice versa ;0)
@justpar185 ай бұрын
What specific stomp pedal are you using during all this - its not shown.....thx!
@tonegarage44915 ай бұрын
www.ikmultimedia.com/products/irigstompio/
@predigr5 ай бұрын
Issues with new Steinberg IXO 12 audio interface. It is impossible to play at 512 samples per second. If you decrease the samples sound breaks. It should not be a problem of the audio interface since it works fine with Audacity for instance...I have a powerfull PC.
@tonegarage44915 ай бұрын
I would open a support token with IK on their forum there buddy I’m not sure about that one
@rodrymor52785 ай бұрын
Do you know if iRig 2 has drivers for windows? Hell, is it even compatible with any asio technology?
@tonegarage44915 ай бұрын
Hiya buddy I briefly used Irig some years ago but I just used it with the iPad app
@AdamWellsMusic6 ай бұрын
I don’t know how to set A5 as a midi output. Not showing up as an option on Cakewalk
@tonegarage44915 ай бұрын
Sorry but I’m not sure about Cakewalk i don’t use it
@AdamWellsMusic5 ай бұрын
@@tonegarage4491 I figured it out. Thank you
@Westerdd6 ай бұрын
This is so great. Now I can assign solo boost, auto wah and delay with one press when I play a solo on one of the songs we play in the set. Thanks.
@tonegarage44916 ай бұрын
Glad to help!
@petekorinis88746 ай бұрын
When i click the asio setting it does not change to asio. Someone know what I am doing wrong?
@tonegarage44916 ай бұрын
Hi there I would raise a support token with IK Multimedia for that they should be able to troubleshoot for you
@emiliomanuel_986 ай бұрын
Is there any way I can switch between presets without a midi controller and instead using my laptop's keyboard ⌨️ and assign for example F1 as a clean preset and F2 as a distortion preset?
@tonegarage44916 ай бұрын
I’m not sure with that one , my midi knowledge is basic level!
@GILLISH6 ай бұрын
@ Tonegarage i am trying to get a wah and my expression paddle to work with a real guitar do u have a video on that or how to get this done thank u
@tonegarage44915 ай бұрын
Do you mean using a midi pedal to control things like wah in a guitar plugin like A5?
@rickhorvath6 ай бұрын
this screen you're showing does not match what the latest version has. there isn;t any way to choose an input!
@tonegarage44916 ай бұрын
Well yeah this video is three years old! Will arrange a new one soon though!
@grooveu19656 ай бұрын
Thanks for the Vid! Is the function the same for CTL for the ME-90? If not, perhaps you can do a follow-up like this illustrating the CTL function process in BTS as well as the physical pedal. Thanks again!
@tonegarage44916 ай бұрын
Hiya unfortunately I don’t have the ME-90 anymore
@pillarsphinx99927 ай бұрын
I connected my Focusrite to my computer, and I can hear it through my headset and all, but when I open up Amplitube 5 it does nothing at all? the green bar and isn't moving at all and the amp settings doesn't change a thing to my sound.
@tonegarage44917 ай бұрын
Hey buddy I would open a support token with the IK Multimedia on their forum, they’re really good at troubleshooting for each customer
@tomkmb41207 ай бұрын
If I want to listen to the output through headphones via my scarlett - do I need to plug them into the stereo output at the back? as opposed to having them plugged into the headphone socket on the front of the scarlett solo (used for direct monitoring) or should the sound come out of that one as well?
@tonegarage44917 ай бұрын
I would day the main headphone socket
@tomkmb41207 ай бұрын
@@tonegarage4491 thank you, I managed to get it working! Appreciate it
@l8tapex7 ай бұрын
yep!!
@rockolav8 ай бұрын
brill
@mariopalumbo98988 ай бұрын
Thank you. It would be nice to hear a demo.
@tonegarage44918 ай бұрын
Noted!
@jls41nj18 ай бұрын
Can I use the Pod go directly into my 1960 4x12 Marshall Cabinet?
@tonegarage44918 ай бұрын
You need amplification buddy, the PG is preamp only
@luznoceda71438 ай бұрын
Thanks a lot
@tonegarage44918 ай бұрын
Happy to help
@hureak14569 ай бұрын
each 5 seconds im getting a white noise is that good?
@tonegarage44919 ай бұрын
That’s usually if you’ve selected a piece of gear you may not own in your collection, usually a cab.
@hureak14569 ай бұрын
@@tonegarage4491 Oh right now it works, thanks man!
@dekelsey110 ай бұрын
Thank you! I should probably learn the power of using snapshots, but I like seeing my presets and hitting mode to toggle on/off the different pedals. I appreciate your video. I found you before getting crazy! Hah!
@tonegarage44919 ай бұрын
Yeah With the PG I also love being able to toggle effects on and off in a patch best too
@gentlecoder516710 ай бұрын
What phisical pedal are you using?
@tonegarage44919 ай бұрын
First of all used a Line 6 FBV Express 2 then I had a Irig Stomp IO
@pichit.raetai10 ай бұрын
Thank you
@tonegarage449110 ай бұрын
You’re welcome!
@iankinzel11 ай бұрын
I don't get an Audio/Midi tab when I click on that menu.
@tonegarage449110 ай бұрын
I would open a support with IK Multimedia for that buddy
@billhinsperger812011 ай бұрын
Eh buddy how do u assign a patch u made to one of your bank channels
@tonegarage449111 ай бұрын
Hiya could you explain a bit further? Thanks Rob
@billhinsperger812011 ай бұрын
@@tonegarage4491 I’m using the boss tone studio app once i create a patch I write it but it doesn’t give me an option to assign it to a bank I went in to control options it shows the banks and ctrl but when I click on it it just shows effect optional no patch options ya do no a little different using the app
@billhinsperger812011 ай бұрын
Maybe I try it manually
@rambache11 ай бұрын
Is there a difference (tonal or whatever) in puting the modulation effect blocks before de cabinet/IR???
@tonegarage449111 ай бұрын
Try both I always say, there’s benefits and differences to either , Rob