Have you shot the rifle after installing the chassis?

Man you talk way too much rubbish before getting to the point! So freaking annoying!

Find yourself an A3, you'll have the royal flush of pre-Rockchucker (or Rock Chucker) presses. The A3 instruction manual is still available on the RCBS website.

So I love Bergara's and have a couple. Then got the BMR for the rack on my ATV. Was convinced by my uncle to shoot NRL22 with it. Didn't do too bad. Not doing too bad. Now I am needing something different and am looking at putting it in this chassis so I can get more weight out in front. I need an LOP of 14" so my current config (Boyd's AT-One) is way heavy in the rear and because of the LOP I need more than 5# up front to get my balance 4" out in front of the magwell. Would this serve me well in NRL22 with the BMR...there are no other choices but is this a doable option to increase my stability?

Thanks for this post- I have owned a Schmitt reloader in 38/357 ( since the early !970s) I used it for about three years before getting a Star progressive press. Just bought it out into the daylight and was hoping to check it out online- before puting it back to work_

I have the same Marsupial bino harness, range finder, and under holster setup… I solved the problem by simply not having a wannabe operator tactical hipster EDC as my mountain/woods gun and went with a S&W 44 mag 4 inch which fits perfectly in the large Marsupial holster and could actually kill a bear LoL 😂

But that speckling................

I just got a B model today at a pawn shop

You really need to get yourself a strap wrench. Pliers, rag or not, don't apply the same force as a strap, and the rubber strap won't mar metal in use.

Can you convert these to rifle calibers?

Where can I find that high cheek piece at?

Why choose? Get both!

I can’t get the bolt back in what am doing wrong

Absolutely love my two PDC Custom Chassis!

I just bought one myself at A&J. I have a MDT chassis coming in for it as well.

Really enjoyed the video. I have an A, A2 and a 2A (2 over the A). All three cleaned up and repainted. According to RCBS there is no 2A, my reply was I have one and will send you a picture of it, they never responded. Don't know if it was a casting error or what. Have 8 Rock Chucker's , earliest is a '69, started reloading in the early 70's. Why so many, sometimes one needs to go backwards and redo, having to change dies etc. One thing lead to another. So, the 3 die set up, one is set up for depriming only, with universal depriming die, the next is for resizing and small primers, then next is the expander die and large primers, the next one is pre-seater, next is final seating and last is crimping. Paint, I found that the ACE brand Safety Green ACE1010099 was a good choice. One can paint it any color they choose, even pink. Don't remember which one (maybe the A) the bushing was like a 1-5/8 double start thread.

Will those chassis fit the 22lr bmr carbon fiber barrel?

After seeing this press on KZbin I always wanted to pick one up. I've seen several on eBay but they were very expensive. After watching your video, I'm glad I never pulled the trigger. I no longer want a Green Machine. Thank you for saving me money and a bunch of headaches. Excellent video.

Hello sir, just ran into this video 9 months late. I have the original B14R, thinking on building another, in your opinion, is it any advantage over the original one? We do precision bench rest 50-200 yards. Thank you.

This is mind numbing I don't need your life story

Seems to use the lyman 310 dies, or as old as it is, the ideal dies, which are the original 310 dies. Uses a handle to reload. I believe the original ideals would seat and crimp at the same time, though it would use a specific bullet mold to accomplish this. They also had some with an adjustable bullet seater like the lyman 310's. They use the same thread, but all 310's are the final iteration with all having adjustable bullet seaters.

this is my choice and had a mixed feeling on what to pick CZ 457 american bolt or this? thanks for dis/assemble in details.

This series is such a cool idea. I stumbled onto it because I was looking for old CH Super C info. I learned on one of these and I still have it, still use it. I have a nice modern Hornady Progressive now. I mainly use the old single as part of my depriming/sizing steps. Then I do the rest of the case prep. I rigged up a primer catcher from an aerosol lid. Otherwise primers are thrown everywhere. I'm starting to see a lot more reloading equipment at gun shows, vintage stuff and it's selling for quite a bit. Maybe I'm reading into it too much but it seems like there's an overall surge in interest in this stuff. Guys like myself have never known any different. I'm delighted to see it but I'm like, "Where you all been?" What you're doing is showing everyone what all this stuff is, whether it's still viable, what are the pros and cons, how things have evolved, etc. It's super interesting to a guy like me who has been into reloading all his life.

My dad was like this. And when I'm gone, no one will know what he did. I can *really* feel what you're saying. Sometimes I feel like I'm the only one who cares. It's nice to see some appreciation for something truly special.

Dude, good video and I am digging the beard! 22 beard gang rocks

Reminds me a lot of the 5.11 push pack

Awesome Mod. I have a Dan & Wesson Bruin (1911 w/ 6.3" Barrel). Any chance you have a compatible pistol that you can advise on the fitment with this Marsupial Gear?

Great video. Looking forward to your next video showing how it shoots.

Hello sir how is that chassis working for you? Would like to get one for my BMR with carbon barrel.

we need updates???

PDC Custom 💪😎🇺🇲

WOW! Hope to run across one of these one day. I'd even be happy with the complete bonanza one

Two years later... how do you like the AO Emperor Grip over the MPA EVG Grip?

I'm not going to send $1000.00 for gun then I have to fix it. Thats bullsh*t

WHAT CHASSIS DO YOU RECOMMEND SO IT HAS "NO" FEEDING ISSUES

So curious how the updates are going. Looking to pick one of these up at some point for my new bmr.

Did you have to adjust the mag release for the bergara mags to work?

Did you have to adjust the mag release for the bergara mags to work in your chassis?

Hey darron i have a couple of these now and every one has threaded hole on the bottom of the handle linkage and my handle spud screws right in it and itll cam like backwards. Do you know what this threaded hole is for? I cant find anything about it anywhere

Where did you get that bergara decal for your carbon barrel?

How is this chassis?

😂 good luck with the new dogs! Thanks for the content! May need to add a heavy barrels b14r to my 22 colection

Great video I just grabbed a heavy barreled action, going to do this when It comes in!

I have a B-14 R I am trying to to get it balance what would you suggest? It is the steel version. I really enjoy your video, lots of helpful information

I've got a Carbon BMR in .22 mag and absolutely love it! Dime size 10 shot groups at 50 yards with CCI TNT. Im sure the B14 is a shooter as well. Bergara is great quality.

i have a green machine for sale if anyone is interested. i use lee reloading equipment. If interested let me know.

Chassis looks great! Any update videos coming soon on this?

Nice looking RPR, I'm thinking about finally doing something with mine (got it in 2018) I need to push it's range out further for a start, I have 1.25" MDT rings & a Vortex Diamondback 4-16x44 FFP EBR 2C Reticle but can only get to around 180/5 meters fully dialed & around 210/15 meters using drops on scope. Any suggestions on the best way to getting it shooting further would be great for a start and any upgrades you think I could look at? Cheers from Australia, p.s, I'm limited with budget.

That was a better voiceover than a Beyoncé concert! 6:12

Standard or M6 thread for the Anarchy knob?