5 ай бұрын
5 ай бұрын
5 ай бұрын
5 ай бұрын
5 ай бұрын
6 ай бұрын
Пікірлер
@yesterdayschunda1760 14 күн бұрын
The heater in that skid steer isn't good enough to keep whoever is driving it from freezing to death in snow conditions, i know because that exact skid steers heater isn't good enough to keep you warm in the Australian winter. Whoever invented these is sadistic.
@stevenh5720 2 ай бұрын
Great looking tire!
@EvolutionWheel 2 ай бұрын
Very much appreciated. We worked for a long time to get this tire right, it was a big project and a team effort!
@BenGross-lj4bj 4 ай бұрын
Couldn't have picked a better skid steer to do this video❤❤❤
@konstantinhuwa3064 4 ай бұрын
Is it not better to use tracked treads?
@EvolutionWheel 4 ай бұрын
Not from what we have seen
@codyweien4513 4 ай бұрын
Real nice an easy when its brand new. Wait till they are worn and smashed/expanded together and i bet its next to impossible.
@EvolutionWheel 4 ай бұрын
We actually haven't had one customer complain about that. 😮
@StrangeTerror 4 ай бұрын
@EvolutionWheel and how old is your product? How many job sites has it seen? Across how many vehicles? I'm a mechanic, trust me, it's going to be an issue. Not to mention those studs are going to start to wiggle over time as the holes expand from the wear and tear.
@EvolutionWheel 4 ай бұрын
@@StrangeTerror 6 years and we stopped counting. We don't need to trust ... we know its not an issue. If it was we wouldn't have so much repeat business.
@Foxsvod 4 ай бұрын
🥱🥱
@zachworrell9114 4 ай бұрын
I bet each segment cost as much as a Tire
@EvolutionWheel 4 ай бұрын
No they don't ... but we love your enthusiasm!
@blazedorange 4 ай бұрын
i think they should remove the safety officer if it is only a problem when there is one
@donaldpowers3314 4 ай бұрын
The problem is that her hands shouls be there.
@lv7603 4 ай бұрын
Thank you for sharing your operation takes a lot of effort to get a plant going, again congratulations.
@smokinlmm 4 ай бұрын
How is the ride impacted compared to sit find tires? First thought is that it's much rougher as the tires are most of the suspension
@EvolutionWheel 4 ай бұрын
Here is a video we did talking about exactly that. kzbin.info/www/bejne/nKLImniAmLiZoposi=UlSliQ9P7OVPN9AQ
@smokinlmm 4 ай бұрын
, This talked about linear compression. Not about the shock absorption composted to an air filled tire. I understand there are pros and cons to having that flex in an air filter tire but a side by side comparison would be great. It's not just about the ride for the operator but also about the balancing of the load on the forks
@EvolutionWheel 4 ай бұрын
@smokinlmm I can appreciate your point, maybe we can look into doing that video. The challenge is very few telehandlers are running air filled tires or allowed to run them anymore. Almost all are foam filled or solid for safety reasons
@luckyjeb9511 4 ай бұрын
What about wear? If the tire is damaged at half life you'd need to replace then all or you would feel it.
@EvolutionWheel 4 ай бұрын
We offer wear parts with matching tread depths if that happens and is needed
@luckyjeb9511 4 ай бұрын
@@EvolutionWheel that's fucking sick!
@FULLradiator 4 ай бұрын
No operator i know will fix the machine themselves........that is 2 guys jobs.....your trying to get one guy to do ..... operators operate, mechanics fix........never the two to intertwine without increase pay
@skijet12 5 ай бұрын
What's the cost to replace a section ?
@ivanvarela3215 5 ай бұрын
I believe $150 a section. They also sell them with different wear patterns.
@EvolutionWheel 5 ай бұрын
@@ivanvarela3215 is right for a 14x24 sized segment as well as the wearable parts option. @skijet12
@ivanvarela3215 5 ай бұрын
@@EvolutionWheel I have a dumb question, has anyone tried using plywood to get by with one of your wheels? I understand the wood would quickly disintegrate, but could that be a way to quickly get the machine unstuck from mud?
@EvolutionWheel 5 ай бұрын
@@ivanvarela3215 I am not following on how the plywood would be used? To my knowledge no though.
@ivanvarela3215 5 ай бұрын
@@EvolutionWheel did I say plywood? My mistake, I mean something like 2x4 or 4x4 wood
@EquipmentReviewInd 5 ай бұрын
Nice design!
@forwhomthebelltolls2546 5 ай бұрын
I didnt know this guy alwas a comedian. The operator can do it. Im in stitches
@ryanhamstra49 4 ай бұрын
Never said they would haha. Just that they could!
@garrettwhite737 5 ай бұрын
How much is the wheel? How much is the segment? I’m guessing over $100 per segment on those telehandler wheels. It’s a great concept. Love the idea, but it’s too expensive. Am I wrong?
@EvolutionWheel 5 ай бұрын
Expensive compared to what? We are typically the same or less than other solid tire options and foam filled pneumatics. One segment is $150, seems pretty cheap compared to replacing a whole tire for $2000-$3000 🤷
@garrettwhite737 5 ай бұрын
@@EvolutionWheelI’m not talking about your solid tire specifically. In general they are a great idea but horribly overpriced over pneumatic tires. It looks to be $2550 to replace all the segments on one telehandler wheel. I have had great luck with new pneumatic tires with a good dose of tire sealant inside. A smoother ride for a third of the price, maybe a quarter of the price. If I wanted to spend a fortune to guarantee no flats, I would buy tracked machines
@EvolutionWheel 5 ай бұрын
Are we talking about telehandler tires specifically as shown in the video or solid tires in general? A full set of new rubber for one of our 14x24 telehandler tires would be $1500 roughly ... a pneumatic is about $1,000 + service call and foam filling. Running an air filled tire on a telehandler is a safety issue if they go flat and a stability issue because the tire and rim doesn't weight enough. I have also only ever seen 1 tracked telehandler machine ever and it was custom made. If we are talking about other tires and tire sizes then any pricing we are talking about is wrong, smaller tires are less money. Hope this helps.
@garrettwhite737 5 ай бұрын
@@EvolutionWheel I was going off the wheel shown in your video, it looked to have 17 segments at $150 a piece = $2550.
@EvolutionWheel 5 ай бұрын
@@garrettwhite737 Yes, if bought 1 at a time. But we sell packages to do full tires and full sets of tires for less.
@jfeal 5 ай бұрын
Far too expensive
@EvolutionWheel 5 ай бұрын
Compared to what?
@mileaux 5 ай бұрын
reinvented the wheel eh
@EvolutionWheel 5 ай бұрын
It would seem so!
@mr.oranges5724 5 ай бұрын
Also reduces on cost as you only need to replace the damaged section and not the whole thing.
@Kraken4201 5 ай бұрын
Jokes on you , that little block is 3x the price of a tire and after driving on a site you can never just change 1 because they never line up
@EvolutionWheel 5 ай бұрын
@mr.orange5724 You sound like someone who gets it
@EvolutionWheel 5 ай бұрын
sounds like you haven't bought tires from us
@Kraken4201 5 ай бұрын
@@EvolutionWheel my concern is when they wear and you replace with a new one it won’t match the rest and won’t fit or will wear drive all weird
@garrettwhite737 5 ай бұрын
@@Kraken4201it will. You could shape it to match the old ones but do you really want to start cutting down a $150 segment?
@williamdeaton1218 5 ай бұрын
Operator do it 😂 they won’t even check an air filter…
@EvolutionWheel 5 ай бұрын
Need to find a better operator 😂
@robertg086 5 ай бұрын
That looks like a total pain in the ass if you have to change the whole tire due to wear...
@calmrelaxingasmr6918 5 ай бұрын
my thoughts
@wight626 5 ай бұрын
Also probably cost alot more. And everything is the lowest bidding.
@EvolutionWheel 5 ай бұрын
Have you ever changed a foam filled telehandler tire? Should be no more than 30 min to swap all the rubber on the tire if someone can use an impact
@EvolutionWheel 5 ай бұрын
@@wight626replacement rubber is 40% less than the cost of full replacement ... might be cheaper than a pneumatic come to think of it 🤔
@garrettwhite737 5 ай бұрын
@@EvolutionWheelif a replacement segment is $150 with 17 segments on a tire, that’s $2550. How much is a whole new wheel? What am I missing?
@06racing 5 ай бұрын
Well it's not the tire that provides safety.
@BeepBeepParkie 5 ай бұрын
Damaged tires are prone to blowing out, which is dangerous.
@06racing 5 ай бұрын
@@BeepBeepParkiethose in the video were airless
@antichrist_revealed 5 ай бұрын
Very Good.
@EvolutionWheel 5 ай бұрын
Thanks!
@zydrid1316 5 ай бұрын
Great product
@EvolutionWheel 5 ай бұрын
Thanks!
@arnoldschmidt2753 5 ай бұрын
Thanks Derrick for the real life demonstration. My CASE 90XT should have no problems accepting the larger (17") tires .
@Mcrnightlife 5 ай бұрын
A lot of people owe you one….thank you🫡
@EvolutionWheel 5 ай бұрын
Thanks, we try our best
@EvolutionWheel 6 ай бұрын
Timestamp: 00:00 Types of Skid Steer Tires for Concrete 00:17 Ideal Skid Steer Tires for Concrete
@GoBack2California 6 ай бұрын
How much do they weigh compared to a regular tire tho?
@EvolutionWheel 6 ай бұрын
A pneumatic 12x16.5 is about 135 pounds, our 12x16.5 is 230 pounds. This gives you the added benefit of lowering the center of gravity on your machine and adding about 200 pounds of lift capacity while still being within a weight range that the drive motors of the machine are designed to handle
@85gti 6 ай бұрын
I worked in a rubber factory for tires and this isn't it. We had old ass 1960s tech that makes this look like African child slave mineral mining. I didn't see a single bucket of carbon black, just railcars and automated baggers
@EvolutionWheel 6 ай бұрын
Sounds like a great place to work! We may not buy rail cars of carbon black but we damn sure work at making the best rubber 😎
@gabrielbadan9534 6 ай бұрын
Great content bro! Keep it up
@EvolutionWheel 5 ай бұрын
Appreciate it!
@EvolutionWheel 6 ай бұрын
Timestamp: 00:00 What Is the Best Tread Pattern for My Skid Steer Tires 00:24 All Terrain Skid Steer Tires EWRS-AT 01:08 What Are Ideal Situations for All Terrain Skid Steer Tires 01:39 Hard Surface Skid Steer Tires EWRS-HS 02:05 What Are the Best Applications for Hard Surface Skid Steer Tires 02:56 Smooth Skid Steer Tires EWRS-SLK 03:26 What Are the Perfect Situations for Smooth Skid Steer Tires 03:38 Wrap Up
@richking4705 7 ай бұрын
Gee that looks like a good tyre , but probably to much dollars
@EvolutionWheel 5 ай бұрын
We strive to offer customers the lowest cost per hour operating tire on the market
@williamhall9204 7 ай бұрын
Excellent video presentation. The information you have provided is extremely important for safe telehandler operation. I would bet that many contractors aren’t aware of the importance of tire weight as it relates to the load chart.
@EvolutionWheel 5 ай бұрын
Glad it was helpful!
@jeezymclovin2215 7 ай бұрын
How many employees have cancer ?
@EvolutionWheel 7 ай бұрын
None ... we don't buy anything from China!
@fernank017 6 ай бұрын
@@EvolutionWheel ...what?
@EvolutionWheel 6 ай бұрын
@@fernank017 Carbon black materials that come from China are known to have carcinogens in them. Our chemist refuses to use them and that makes us happy
@chenilletueuse1 7 ай бұрын
Man, this plant is old. About 75% of the process is automated nowadays.
@EvolutionWheel 5 ай бұрын
We might not have the newest equipment, but we definitely work to make the best rubber.
@viking988 7 ай бұрын
Rocky be like : gosh can't wait for him to please shut the frick up so that I can do my job.
@EvolutionWheel 5 ай бұрын
No ... Rocky is a class act!
@donkey18071980 7 ай бұрын
My daddies business makes metal things !
@EvolutionWheel 5 ай бұрын
That's great
@donnymcgahan1158 7 ай бұрын
Make sure your rims are... square?
@EvolutionWheel 5 ай бұрын
Yes, the offset. You don't want to have a hub plate welded that is not properly square that leads to a wobble in the tire as it is driving.
@Masta2222-ib9ih 7 ай бұрын
Rocky looked like he didn’t want to be there… 😂😂😂
@EvolutionWheel 5 ай бұрын
Rocky shows up every day with a smile on his face ... solid guy!
@Pathfinderxr 7 ай бұрын
Bad on the eyes that. Still getting hit with bad rays 🙋♂️
@EvolutionWheel 5 ай бұрын
Your not wrong ... we will deal with him
@Pathfinderxr 5 ай бұрын
@@EvolutionWheel nooo! Don't want to get him in trouble... it was demo purposes only 😉
@EvolutionWheel 5 ай бұрын
@@Pathfinderxr It's all good, I was joking. The guy covering his eyes with his hand runs the company ... he won't listen, but I'll have a word either way! 🤣
@EvolutionWheel 7 ай бұрын
Timestamp: 00:00 Intro 00:10 Why a tread pattern is important for all-terrain telehandler tires 00:51 Segmented design for all-terrain telehandler tires 01:11 How to easy repair a segmented all-terrain telehandler tires 01:26 How stability works for an all-terrain telehandler tires 02:15 Wrap Up
@EvolutionWheel 7 ай бұрын
Timestamp: 00:00 Intro 00:31 - Reasons for using solid skid steer tires 00:50 - How to get solid skid steer tires on Evolution Wheel 01:04 - How’s a solid skid steer tires works 01:12 - Benefits of solid skid steer tires 01:27 - How is the durability and quality of the solid skid steer tires 01:43 - Wrap Up
@EvolutionWheel 7 ай бұрын
Timestamp: 00:00 Intro 00:17 Skid Steer Tire Options Available 00:34 What Are Ideal Situations For EWRS-SLK 00:45 Significantly More Wear Life Tire 01:01 How Wear Life Indicator Works 01:35 Segmented Serviceable Concrete Skid Steer Tire 01:51 Wrap Up
@dustinharris7296 8 ай бұрын
Can you put these on a regular pneumatic wheel?
@EvolutionWheel 7 ай бұрын
No, they will not. The first set of tires a customer purchases from us comes with the rim, after that you can purchase "Retread Kits" which are new rubber and hardware.
@DNOJ 8 ай бұрын
Hope to see these out there in the wild.
@nunya5864 8 ай бұрын
Biggest down side is you cannot change them on the equipment which would be a great feature change and go like the originals these seem to be more time consuming but might be slightly cheaper not sure
@EvolutionWheel 5 ай бұрын
It is possible depending on the tire option and machine they are on. With skid steers specifically the tire gets pretty tight to the frame on some machines.
@nicholashowlett5356 9 ай бұрын
How well do they do in mud, wet, slippery conditions
@EvolutionWheel 9 ай бұрын
The tread face is designed to clear mud and material for improved clean out. We also integrated sipes into the surface of the treads to improve traction in wet and icy conditions similar to a snow tire
@orangecookie3132 9 ай бұрын
How good are they on the snow
@EvolutionWheel 9 ай бұрын
Check them out in the snow ... kzbin.info/www/bejne/q5azXqmkpbuDqdksi=aFBC-PQA3rCfa079
@ironfistvail 10 ай бұрын
So I’ve been fighting off keyboard engineers sticking up for you guys because I believe in this product. say one section gets messed up and you need to change it but it’s a year after the wheels were bought so the wear is different and you put a new section in will the height difference matter? I said these are not like car tires and they don’t wear as quickly so the height difference will be so small it won’t matter am I correct
@EvolutionWheel 10 ай бұрын
This situation is actually quite uncommon given how the tire is manufactured and the quality of our rubber compounds. Having said that if a customer has a half worn tire we offer wear parts with matching tread depth segments. After we sell a full set of tires to a customer we typically hear from them next when it is time for a full replacement set of rubber where they reuse the rims.
@ironfistvail 10 ай бұрын
So I was 100% right I hate people on the internet they talk bad about innovative products just to sound smart not knowing how you are hurting the company that did absolutely nothing to you thanks guys keep up the good work