Thank you so much. Video made life so easy. Its actually pretty well designed and built. I was expecting some bullshit vietnam light "plasticky" garbage. I was 100% wrong. And 150% I def will be buying another Fleck when this finally dies.
@TanzinaJahan-vc6niАй бұрын
❤❤
@earljtharpАй бұрын
What about the other piston?
@luxliving6745Ай бұрын
What’s a day override?
@JamesMayvilleАй бұрын
This video was perfect for my 2000 Fleck 560SE. Turned out the filter screen was filled up wit small particles from the brine tank. The water to the brine would fill fine but when the brine rinse was taking place it had a slower flow. Thanks for making this video for us DYIers.
@TriodeLuvr2 ай бұрын
The small white "flow disperser" shown at 6:02 is part no. 13497 and is labeled "Disperser, Air" in the service manual. I pulled this out in order to remove a few specs of black rubber, but then it broke apart while I was cleaning it. This was an unexpected setback, and I now have to wait a week or so for a new one before the softener can be put back in service. Just a warning to other viewers - this part is very fragile!
@TriodeLuvr2 ай бұрын
Right, a "university." That's the paddlewheel flow meter, not the turbine meter.
@tonesmith9092 ай бұрын
Next question, what time is it?
@TerrySmith-qj9qy2 ай бұрын
I have a 255. The drain leaks a good bit of water constantly, even when not in regeneration mode. Could this be worn o-rings on the Backwash flow control part?
@SzadiB2 ай бұрын
Totally unusable instruction, as in paper version what i received yesterday with this unit - choose what you want to choose - that i know..., but nobody from Pentair corporation cant explain whas is a best set for example for my parameters...? I am dissapointed and will not choose again this stuff.
@user-oq2cn9ff6z3 ай бұрын
thank U
@RichardBartlett-fo8hz3 ай бұрын
Hello, Just one comment on the sequence of the depressurization procedure; wouldn't you need to turn the water supply off first, then manually cycle the controller? This would alleviate the pressure in the system. I performed the sequence as indicated in the video and experienced a burst of pressure while removing the flow meter cap...made a big a splash :)
@lorenzoagostinelli49603 ай бұрын
Pentair water University could you please tell me how much the hardness and capacity should be set at in a house with 4 person? And how should i know every how many days the regeneration start? thanks
@LiquorandCheeseburgers4 ай бұрын
My unit is a 263, the re fill flow cap looks nothing like yours w the checkball nor does it look like the one w the "washer". Mine has three slits for flow. Do you know if I'm missing the checkball or do I have the wrong refill part? Thanks, great video.
@hdgavin41924 ай бұрын
What capacity should I set it at? What does 25kg mean? Is that the number of kg of salt in the brine tank??
@bobroche4 ай бұрын
This video is one of the best DYI videos I have ever watched. Saved me a whole bunch of money by avoiding our local Water-treatment companies. Very concise presentation with very good audio and video quality.
@richardhutson20364 ай бұрын
how do I get tech support
@user-oi5fq9oj5y5 ай бұрын
How to the h clip on the wellmate pressure tank connector
@joeklejko13915 ай бұрын
Sounds like a cheap microphone horrible audio.
@user-ox6oz9wk9e6 ай бұрын
0:51 where do I find those hose reducers (adapters) that go on the valve housing?
@k501596 ай бұрын
Much appreciated
@grzegorzkoslacz38597 ай бұрын
Hardness of source water or the softened level you wish to have??
@jaycorrales53298 ай бұрын
Thanks, I was able to clear debris causing continuous discharge flow, after viewing this video. It saved me thousands in equipment and from plumber bills.
@davidsridharan2028 ай бұрын
I don't have a button in the small bass piece with the white holder. Is that normal and if not, how do I know when one goes in there?? That big plastic piece has 2.4GPM written on the outside. Not sure if that helps.
@mariosavard15528 ай бұрын
My injector won't come out. Even with excessive force. I don't know why it's so easy on the video. I have the 760/255 model.
@BigRigRV8 ай бұрын
Likely from mineral build up. I would see if your local softener company has a preventative maintenance call offer.
@mariosavard15528 ай бұрын
My injector won't come out. Even with excessive force. I don't know why it's so easy on the video. I have the 760/255 model.
@TerraStu9 ай бұрын
Thank You! ❤️
@nickthornton19159 ай бұрын
Where do you order the tools
@user-ox1qf2eh1j9 ай бұрын
Control want reset
@scottbritton37979 ай бұрын
What kind of capacity/cu ft of resin/flow rate is the magma 298 valve used with?
@OPERACIONESRONEY10 ай бұрын
Algún vídeo de cambio de sellos de valvula 9500
@ipraneelvikeshwarprasad975610 ай бұрын
u should explain with diagrams, it b easy
@thomaskass666810 ай бұрын
You should show how to put it back in service after maintinence
@yvonnelopezarias541011 ай бұрын
Thanks
@MMK8611 ай бұрын
great video, clear and concise...it will help me tackle my 5600 SXT that stopped using salt and it keeps putting too much water in the brine tank after a regen cycle.
@originalacousticguitar11 ай бұрын
I sure wish these kind of videos would show repairs under real world conditions. Everything in this video is clean and accessible and it doesn’t reflect the working conditions that people like myself will encounter when they try to do it.
@murkyturkey52384 ай бұрын
It’s so you can see what they’re doing 😂 yours shouldn’t be different
@scottbritton379711 ай бұрын
When the valve is older the sticker might not be readable to match flow numbers at a glance.
@scottbritton379711 ай бұрын
Great discussion. You have to understand the process to troubleshoot root problems. If you do it well it will perform well, what are the most common mistakes people make during installs that affect efficiency in a negative fashion or lowering the percent efficiency of the design they are implementing. Thanks..
@artriumph11 ай бұрын
I see PM on the left but no AM. Where is the AM setting? Thank you
@bourayouwalid394311 ай бұрын
Bonjour, comment on supprime le devourillage de paramètres d'une vanne 255 /760? Merci d'avance
@171RBD Жыл бұрын
The brine tank quit draining after inadvertently unplugging the softener for a two week period. I called a local expert referred by Angie (list). An inexperienced tech fiddle futzed around for over an hour and then recommend replacing my softener for a cost of over $6,000. He left and I continued to pursue a DIY fix. Called the Pentair Fleck tech line and was pointed back to google to do a finer search. “Fleck 5810 injector” to be exact. Found this KZbin video and in the name of Jesus! I am saved $6,000!!!!!! Thank you!
@terryleflar6451 Жыл бұрын
I had to disconnect my 760 series and the adapter plug to the wall outlet broke. I removed the the other end from the control valve. The new adapter plug arrived now I can't find where I connect the end into the control valve. Can you please help, thank you
@bostongultom3900 Жыл бұрын
Good
@kenmitchell2126 Жыл бұрын
Thank you for this video. My brine valve got a little crusty (very hard well water). I cleaned it up for now and got it operating like normal. I plan to replace it soon.
@roybatty2030 Жыл бұрын
Surely the meter should be replaced only when the magnet test does NOT register flow…?
@rotaxrider Жыл бұрын
Also new subscriber
@rotaxrider Жыл бұрын
The flow control under the white plastic piece you pulled out with a number on it well mine doesn’t have that rubber washer or flow control. I’m having g an issue with no suction on my brine rinse instead it’s pushing water at a good heavy flow. Is this missing piece my problem?
@jeremylanglois78166 ай бұрын
Did you figure it out? Same issue here
@rotaxrider6 ай бұрын
@@jeremylanglois7816 Yes I had to replace the piston assembly and it solved my problem
@rotaxrider6 ай бұрын
@@jeremylanglois7816 When you turn your regenerating dial by hand all the way around back to the beginning is it harder to turn then before when it was new or newer?
@jeremylanglois78166 ай бұрын
@@rotaxrider I have the digital one so not sure, I might try to take it apart and check the piston assembly on your advice though. I already cleaned the injector and dfcl without success unfortunately
@rotaxrider6 ай бұрын
@@jeremylanglois7816 ok
@BaggerJay Жыл бұрын
Thanks for the video. It was very useful in rebuilding my unit. For anyone doing it you do not need the special tool to replace the seals and spacers.