Kingswift

Пікірлер

@BrentonEllard 2 күн бұрын

Why are u sanding and laquering when u have no dials, no motor, no wiring, no plumbing, no g box, no solar etc. What goes in ur dash is dictated by all these things and it will change several times before u finish this boat. So ur doing the unnecessary. Where are all these main components? Have u chosen any of these things? Do u even have a half plan for these things? We dont know any of these things because u havent told us. Sorry to be harsh but u mumble to much too. I would love to see this through but so far stuff has only gone out, when are replacements going in?

@Kingswift555 2 күн бұрын

@BrentonEllard Thanks for your comment,, your absolutely correct. I should have shown this, the dash is being used as is and new dials, which I have do fit. I need to get this ready and the inner panel ready below the control panel. I will mention this next time, thanks for your opinion. I do take it all on board.

@claudeross126 7 күн бұрын

It's going to be a great looking boat

@Kingswift555 7 күн бұрын

Thank you, It will start coming together over the winter

@southernprojectsyt6340 9 күн бұрын

A turn turbine in below the bow, that thing must turn like a brick.

@Kingswift555 9 күн бұрын

Yes it will do the job but you are correct, however what cant be seen is this unit has twin turbine props where on most there is only a singe, I need to replace the motor with something which can really give them the RPM they will need,,, Thankyou

@FrazerGoddon 14 күн бұрын

Having to replace all this cable seems rather expensive. 🤑

@Kingswift555 14 күн бұрын

That's 60 years of cable at least 50% has been redundant since 2008

@claudeross126 14 күн бұрын

I have no idea what you are doing ? But it's entertaining !!

@Kingswift555 14 күн бұрын

@claudeross126 Thank you,,, I also think that sometimed

@pm1104 14 күн бұрын

Me neither.! 😊

@headhuntersfossils 19 күн бұрын

Bit of glue and you're away 😂

@verdanunez4467 21 күн бұрын

get 4 views especially

@verdanunez4467 21 күн бұрын

The video is great, you need to keep promoting your channel. Is not hard.

@Kingswift555 21 күн бұрын

@@verdanunez4467 Thank you

@claudeross126 21 күн бұрын

I appreciate your no nonsense approach to the renovation.

@Kingswift555 21 күн бұрын

Thank you I intend to try and keep this project as straight foreword as posable

@FrazerGoddon 26 күн бұрын

The pictures at the end looks good. You should use them on your social media

@theexciseman9013 27 күн бұрын

I knew one of Pirate’s previous owners ! The one that did the second round Britain race.

@Kingswift555 27 күн бұрын

That was a massive achievement, brilliant story to go with it.

@Kingswift555 28 күн бұрын

Still coming across Bilge spaces, which are now nearing completion,, need to get these done!!!

@FrazerGoddon 28 күн бұрын

Very good video as ever, coming along!

@Kingswift555 28 күн бұрын

More to come! Still getting prepared

@petermccahon6485 28 күн бұрын

When you said champagne and lowered those metal cages into the hold. Those attach to the rail forward and hold your fenders while you are moving

@marcellebaudry5786 29 күн бұрын

bravo et courage

@Kingswift555 27 күн бұрын

Thank you

@kensims9009 Ай бұрын

Beautiful boat ...amazing history... very well done Timmy for saving her... Just watched you taking out the wheel house wiring.. Great video as always...watching and enjoying your work Kind regards Ken ❤

@Kingswift555 Ай бұрын

Thanks 👍

@robertparrish5542 Ай бұрын

if you are not going to use those props , sell them as they are NOT cheep new for prop that size new they around a 1000 a prop

@Kingswift555 Ай бұрын

Thank you yes they are far to heavy looking at 2.5 to 3 Litre Engines,, so defo smaller props

@GetOutandShootRAW Ай бұрын

Did you end up breaking all the health and safety rules in the world :D

@GetOutandShootRAW Ай бұрын

Now you know how to wear gloves, every day is a learning day...

@GetOutandShootRAW Ай бұрын

Great video Dad, got yourself a bit of a project here! Keep it up! Though don't push yourself too much!

@Kingswift555 Ай бұрын

That's the plan!

@BrentonEllard Ай бұрын

So, it doesnt have engines? Do u have original engines etc? Also throw all crap out of the boat u dont need or u will be moving it every 5 mins. Forget all boat wiring for now until u fully frame out and know where every thing is going to go. Just put temp fluros in every room for now so we can see what ur doing. Going good mate.

@Kingswift555 Ай бұрын

The engines were removed around 2017 by the Boat Owner Michael Barlow who raced the pirate, they went in to a yacht called Galmara Moored in Lowestoft V8 360 BHP Cummings images.app.goo.gl/nPpyUu3czkjAaZHC6

@Kingswift555 Ай бұрын

No Engines the search is on there will be more on this coming up later, thankyou

@kensims9009 Ай бұрын

Beautiful British boat...with an amazing history 👏 Thank you for saving her... Kind regards Ken

@Kingswift555 Ай бұрын

Thank you

@Maddie-Girl Ай бұрын

What yr and make of boat is she mate,,huge project looking forward to it as I’m refitting a 34 ft trawler

@Kingswift555 Ай бұрын

1968 Original Ocean Pirate Brooke, Built and commissioned at Brookes Marine Lowestoft UK, one of two racers made here.

@mikehorrill9289 Ай бұрын

over all brooke marine built 21 of this type production ceased in 1976

@Kingswift555 Ай бұрын

@mikehorrill9289 This is why I had to double-check the details as mine was one of two possibles, This was the one, It's amazing how many people have sent detail's,, it's going to be slow but a decent project Thank uou

@Kingswift555 Ай бұрын

Hi, 1968 Ocean Pirate brooke Built in Lowestoft by Brookes Marine

@Leonwhu73 Ай бұрын

Spiral ductwork for A/C

@iaincrosbie2873 Ай бұрын

I think you might have a famous yacht there. If you search for images of a Brooke Marine Ocean Pirate you will see a few of one competing in offshore races bearing the number 323. The pictures of that boat clearly show the access hatch you have which I don’t think would be a standard feature on production boats. I’d weld up that deck hatch and instal a watertight hatch in the bulkhead, keeping the space as a chain locker and retaining the crash bulkhead.

@Kingswift555 Ай бұрын

Thank you I had the information prior to purchase, I had to make sure this was the one. I now have the registration and can confirm this is 323. I will make a video of this boats history in the next week. Only possible legal issues stopped me from doing this in case I was wrong.

@Kingswift555 Ай бұрын

Thank you, I knew the history but had to confirm this is 323, I now have all the logs and the history and will complete a video on just this alone in the next week.

@FunnyAnimals-1957 Ай бұрын

that hole in the bow looks to me like its for the anchor chain and or windless or anchor

@Kingswift555 Ай бұрын

It was made for an anchor but never used as was fitted with a top mounted winch the steel brace is still in the bow

@BrentonEllard Ай бұрын

This could be good to watch. Can we have a bit more info on the boat. Size, model etc? Wheres the engnie room, whats in it? No boring long drone shots. When u show us through the boat tell us where u are and dont miss any rooms. We all love a good boat rebuild.

@Kingswift555 Ай бұрын

Good point thanks