Finally someone that mounts an access point properly and notices the difference :) good work !

The amount of tools you have for being a low voltage I.T data guy is crazy!

Looks like you did a nice job.

What brand and size are the shelves? What is the depth and width of the passenger side shelf between the back door and the side door. Thanks

Watching in 2024. Now you need to pull your shot over a frozen ball for it to turn out right. 3:05

This might be a tall order the way you did. This was perfect. Is there an updated one for 2024 for programming a G4 pager? Unfortunately I just can’t follow it because it’s laid out differently and I’m very much a beginner with this stuff. Appreciate it. Thank you

THANK YOU. Been trying to program this G4 for a month. This is exactly what I needed

We have a LinkRunner at1000 (Fluke Version) and just got our LinkXpert in the mail. We were hoping to have the same functionality as the at1000 with a few extra features. We are not an installer and our primary usage for our at1000 is the switch port application. Most of our OT networks do not use DHCP so the inability to pull the switch port and VLAN information without being on the network essentially makes the LinkXpert useless for us.

What shelves do you have installed in the van? They almost look like they could be generic indoor shelves that you mounted into the van.

Your Platinum Tool Qualifier looks exactly like the Softing NX1400 thatr we use for years. I Think it is the exact same thing.

I just got back into scanning after 25 years. It is leaps and bounds beyond what I remember from scanning in the 80’s and early 90’s. I jumped right in and bought BCD436 used for couple weeks and realized my area is simulcast, so I bought the SDS100. Programming these things is daunting for me, but I can get the systems I want to listen to for now while I’m learning. Now I just discovered the unication pager and I went ahead and bought that as well that’s perfect for the systems. I want to listen to. I just have to learn how to use all this equipment now. Having fun rediscovering scanners in the 21st century. Very informative video. Thanks

I have M54, but always failed update using USB flash disk, even i had rename the ROM file like MP54

Good comparison. If you do a video in the future, a lot less motion would be helpful. I started to get motion sickness.

who did you go through to get the shelves cleats to mount packout boxes? very intelligent!

Man I’m trying to get into this field I just turned 20 and coming from a hvac background , any tips ? Any certifications you recommend I should get that would help out to get a job ?

Dyslexia?

Comment je peux avoir cette pièce

Comment je peux avoir cette pièce ?

I run an Small IT company and was looking into getting this unit as an upgrade to the net prowler i have been using. Trying to see if the extra features are worth the cost.

Thanks for this. Exactly the information I was looking for. Was really hoping it would mount to a box as well.

I'm having the same issue with a MP56. Do you know how to fix that on this phone?

You just saved me plenty of cash. Thank you.

Very good video!! I only use my cutters (hack saw & roundy round tubing cutters) for doing frames for golf nets. I do have the Saws-All and recently purchased a cutoff tool. May give them a try next time. Also, thanks for the comments about reaming/filing the tube ends. I only do that to keep from cutting MYSELF!! Didn’t think about wires!!

If you can not hear a tone near the cable is a good thing. That means, the shielding is working. I think the Softing tester is way too slow. Not seeing which wire is broken is also not great. The length measurement.... Wireless test are way better with an Android app.... Thank you for showing.

As someone who works in IT, I love the clean look of good cable management and the finished look of the patch cable connections. Great job!

I'd rock either the bandsaw or the hand tool. Hand tool for a lightweight loadout, bandsaw for speed.

Can you share the file anyone?

Thank you for posting this!!! The info you provided resulted in two recovered phones for our office. And the file size information and renaming protocol proved valuable. In my case, the files I found were actually a hair different in two cases - 42,063 KB for the rom and 9,985 KB for the bin - and the rfs was exactly 7,168 KB. Again, thanks for posting this video! God bless, Daren Butler

Bro doesn’t know how to cut even with the bandsaw shit is hard to watch

Hi, The 1.41 firmware has been released. Please update it and also try to measure the short UTP cable with it. Maybe they have fixed the bug and you have a more accurate measurement. Please try it because I am interested. Thanks

You lost me at low voltage…

is the Fluke DSX 5000 or 8000 better of a certifier than the Etherscope nXG or the WireXpert 500?

Curious if you've ever tried the Pockethernet tester? Very cool little tester that pairs up with Android or iOS. Even though the website is still up, I believe the company may have gone out of business during covid supply chain issues.

Don't forget, the case thats on the M3 isn't included. It's seperate. Also those tone wands are VERY fragile, they are not built to take any abuse at all.

small tip for the next videos is to point the camera towards what your filming. this far 2.5 minutes in you only filming parts of what youer showing...

Your awesome man thanks so much for getting back to me.

This was very good. Thanks for the video.

I have one for sale NYC anyone interested

Very good review, thanks!

Wire grabber tool, where u get that from. Great video thx

Great Video! Awesome info!

Good afternoon from the Great State of Texas. Today, I found this video. What do you do for a living. I did not see any real tools except your meters. Thank you

Frame lock and it’s amazing!! #258 here 👊

You should check out the micro milling version. They nailed it with the detail and finish on it. Got my blacked out slash with skiffs yesterday and absolutely astonished by it.

I can't wait for mines to arrive, I opted for milled scales 🤩🤩🤩

Looks like you're the first on KZbin to take a look at it! Mine should be here within a couple days so thanks for making this video. I'm even more excited now! Hopefully you get the knife bug and start collecting like a mad man. Happened to me a few years back and I can't stop 😄. Great video! Would love to seem more EDC stuff from you in the future. Cheers!

This is beautiful bro

Mine's in the mail! Super stoked!

Great review. Skif bearing vs Micro Slash Edition?

It looks awesome, but how much did that cost? Multiply that by 10 crews.