So far so good.. it's very strong winch.. doesn't sound bogged down when u der load
@toddjohnson778724 күн бұрын
Great job! Finally someone on KZbin who finally got it right! Great video and breakdown of how this works!
@bigspoon3425 күн бұрын
Thank you for your help
@vfr800fi0725 күн бұрын
No problem
@bigspoon3425 күн бұрын
What kind of insulation did you use ?? Where can I get it from
@vfr800fi0725 күн бұрын
Siless Liner 157 (4 mm) mil 36... www.amazon.com/dp/B07B75PD8B?ref=ppx_pop_mob_ap_share
@jayxns27 күн бұрын
Anyone know how to make a aftermarket thermostat fit in the housing ? It’s pretty rough getting it in it keeps coming off the edges
@Desmo129 күн бұрын
Looks like a Ford now.
@vfr800fi0729 күн бұрын
I don't mind it..
@truckguy6.724 күн бұрын
Thats exactly what I thought too.
@Mr-furleyАй бұрын
Now i know what i wanna do with my 4.3 caprice. Thanks 11 years later😂
@97clubcarАй бұрын
What exhaust do you have on it or recommend
@vfr800fi07Ай бұрын
All I have is a muffler delete with the stock resonators still in place.. no drone, about as loud as a TRX.
@97clubcarАй бұрын
Where are you located.
@SkiaLykoSАй бұрын
Your rig is looking pretty sweet. Where did you get your hidden winch from?
@vfr800fi07Ай бұрын
THANKS, Swarfworks I have a video on that too
@Heater_on_the_hip247Ай бұрын
one of the worst mods I've seen. but to each their own.
@vfr800fi07Ай бұрын
It was free to try out.
@TouchedbyapriestАй бұрын
How did this work out for you at the time. Got a couple questions
@vfr800fi07Ай бұрын
What.ypu need to know?
@TouchedbyapriestАй бұрын
@@vfr800fi07 I was looking into ATM.. when cornering sometimes take the turn a little too quick. And the esc kicks in. Would this help?
@vfr800fi07Ай бұрын
@@Touchedbyapriest I don't know that it would help that or not . But it will help a bit in body roll for sure.. you may have to put it in sport mode or something to reduce that from kicking in as much
@TouchedbyapriestАй бұрын
@@vfr800fi07 do you know if that option is available to do on a limited ram? I can always check with dealership next time
@vfr800fi07Ай бұрын
@@Touchedbyapriest oh I was thinking it was a TRX
@casmithc2Ай бұрын
I like the lights, but I miss your RED RAM lettering. That was pretty cool!!
@vfr800fi07Ай бұрын
Yeah I do like the RAM letters too.. but since this was sent to me to do a test fit I decided I'll try it. Didn't expect to like it though. So it's a win win.. since I don't plan to take it back off and go through that work🤣🤣
@casmithc2Ай бұрын
Does Susan know that you removed her Ad from your intro? What if she finds out and pulls her sponsorship?
@vfr800fi07Ай бұрын
It'll be back on the next one when I do a review on her Mach E
@casmithc2Ай бұрын
Are you getting close to TRX Money on your Warlock? Lol
@vfr800fi07Ай бұрын
Ha no where near. I'm at about 58K total with the cost of the truck too
@Unfinished-Business24Ай бұрын
Pretty cool you have any night shots of it
@vfr800fi07Ай бұрын
I can get some later tonight. I just installed it today..so I have to wait to get that
@Unfinished-Business24Ай бұрын
@@vfr800fi07 no worries pal looks great really like it
@sailorall20Ай бұрын
How much did the light cost.
@vfr800fi07Ай бұрын
It was about $300
@sailorall20Ай бұрын
Ok thank you
@SilverBackELTorroАй бұрын
If I understand this right. It seems like the engine will Rev a little higher with the 392?
@vfr800fi07Ай бұрын
Cruising speed yeah..but max rpm is the same
@flyfastpilot1Ай бұрын
Thanks I’m going to swap mine out, not sure how you reprogramed it? Special hand held computer?
@vfr800fi07Ай бұрын
Alpha OBD APP with a obd plug wireless
@timdavis8154Ай бұрын
Good looking truck.
@vfr800fi07Ай бұрын
Thank you
@casmithc2Ай бұрын
Is that Susan's ride?
@vfr800fi07Ай бұрын
She just got a Mach E
@casmithc2Ай бұрын
@@vfr800fi07 Two ELECTRIC CARS in the Fleet?!! The Real Estate business is good in MICHIGAN!!
@vfr800fi07Ай бұрын
@@casmithc2 they had good deals and zero percent on the Mach E
@casmithc2Ай бұрын
FIRSTTHUMBS UP and COMMENT for Susan! When will we see her on the channel??
@vfr800fi07Ай бұрын
Oh ha, IDK that will be hard to get her on there. I do have some reviews to cover with her Mach E. I also have a company going to send me items for the RAM.. to test out and install
@HEC45713Ай бұрын
This Video Helped me, the washer is up and running, struggled with getting bottom screw off from the motor. Ended up stripping screw, be careful make sure you buy multi-tool in video. If its too tight insert multi tool straight in place and hit a couple of times with hammer toward loosening position this will get it right off. Thank You For making this video! great help during these troubled economic times. Much Appreciated !!!
@vfr800fi07Ай бұрын
No problem whatsoever, I appreciate your comment
@ForeverVersatileАй бұрын
what size wire did you use?
@vfr800fi07Ай бұрын
6awg
@adalbertovilla7217Ай бұрын
I have an 04 ram 5.7, I’m tryna swap it to 3.92 gears. Would I be able to just slap them on or would it be more complicated than that. Its the stock trans on the truck. Any tips would be helpful👌
@vfr800fi07Ай бұрын
If you can find a 3.92 diff you should be able to swap it.. the rear axle can be swapped or just the gears
@TouchedbyapriestАй бұрын
🔥🔥🔥
@TouchedbyapriestАй бұрын
Sick work
@vfr800fi07Ай бұрын
Thanks!
@jackjamessmith-xd4lcАй бұрын
l think it is the best air intake , you must get the tune . Thank you man for truth ! l like it ! l once had a 460 Ford truck reversed the air top , and boom power get next too anybody going up a hill and win .
@vfr800fi07Ай бұрын
Yeah unfortunately there is no tuning available for the 23+ yet as far as I know
@TouchedbyapriestАй бұрын
Do you happen to have the part number for this? I found a few..I called a couple dealerships... Same say it's $700 another says it's the $1400 Version
@vfr800fi07Ай бұрын
Part number for the front diff?
@TouchedbyapriestАй бұрын
@@vfr800fi07 when I used yours in the picture which starts with the P. They told me it was invalid part number
@vfr800fi07Ай бұрын
@@Touchedbyapriest www.ebay.com/itm/266774637517?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=DMZOncO4S-W&sssrc=4429486&ssuid=iT7x1w2BRz6&var=&widget_ver=artemis&media=MORE This is the one for a 5th gen . There is a sticker on it
@TouchedbyapriestАй бұрын
@@vfr800fi07 I'll message him and ask for the info. And then go back to dealership and ask.
@TouchedbyapriestАй бұрын
@@vfr800fi07 you got Facebook ? Maybe easier to message you there. I do really appreciate the help too
@TouchedbyapriestАй бұрын
Out of interest what mods have you done to the ram 1500 to get it there.
@vfr800fi07Ай бұрын
I actually have a whole video covering everything done to the truck and.. individual videos of installing them
@TouchedbyapriestАй бұрын
@@vfr800fi07 yeah I just saw. I didn't know if had a condensed list. What's your take on my setup. Running 37s 24x14 on a 8 inch lift. 3.21 gears. Now in the process building it out. Did the 6.4 ported manifold and Fastman throttle body. Got a Diablo tuner. Soon to be Jay Greene custom tune.. Headers are coming, then I'm bolt on complete. But have been recommended to get 3.92 gears?? Opinions
@vfr800fi07Ай бұрын
@@Touchedbyapriest I definitely would go to 3.92 on that set up
@TouchedbyapriestАй бұрын
@@vfr800fi07 ok thanks man. 5th gen with the closed front end locks me to 3.92 gears. If knew about this before the truck would have got them standard now have to swap. Found the front diff new so far 1k Gonna look for the rear axle as prob be easier to do then changing the gears?
@vfr800fi07Ай бұрын
@@Touchedbyapriest yeah I know..kind of stuck with 3.31 or 3.92 as only options
@TouchedbyapriestАй бұрын
Nice work man... Im looking to do this also. Dealership wants 3k or so to do the work. I dont have have lift and tools to diy
@vfr800fi07Ай бұрын
Thanks.. I'm somewhere in the realm of 1100 or so.. I haven't sold my stock front diff yet.. but I could recoupe some money there
@TouchedbyapriestАй бұрын
@@vfr800fi07 where you located? And do you install for others?
@vfr800fi07Ай бұрын
@@Touchedbyapriest I am located about 30 mi south of Chicago.. on occasions I do installs for others
@TouchedbyapriestАй бұрын
@@vfr800fi07 ah I'm no where near you
@iPocketPickАй бұрын
Any idea if this would work on a 23' Limited 1500? I have Blindspot, and emergency braking, so I'm pretty sure I have the DASM.
@vfr800fi07Ай бұрын
There is a list of items needed to add it.. I'll try and find it
Looking to level my BTS edition and throw a 1/2” spacer with the 325/65r18 Think it’ll work?
@vfr800fi07Ай бұрын
Are you saying just the spacer.. or level it and a spacer
@stetsonschmitt7411Ай бұрын
2” level and a 1/2” spacer. But I’m wondering if I can get away with a .25 to avoid changing the lug studs with extended ones.
@vfr800fi07Ай бұрын
@@stetsonschmitt7411 what 2" level are you using . A strut? I wouldn't go more than the 1/4 inch spacer. I definitely wouldn't stack spacers either. It didn't change the ride at all. But it gave about a 1/2" lift over the 2". My situation may be a little different though . I also added a winch. Which is why I added what I did
@stetsonschmitt7411Ай бұрын
@@vfr800fi07 motofab 2" is what i have on order on the strut yes. Agreed. Not planning to stack spacers certainly.
@stetsonschmitt7411Ай бұрын
Follow up. Installed the TRX wheel/tire with .25 spacer. No rub. Minimal space between UCA and tire but it’s going. Now to decide if it’s worth it to level and change UCA
@JosePerez-oq7fvАй бұрын
Mark how do you find out on this very cool I would have never thought of that good job
@vfr800fi07Ай бұрын
The air ride leveling sensors just need to be tricked with different length links. On e I get the 21's back on I'll see where it's at.. maybe I'll drop it a touch more
@97clubcarАй бұрын
How much was it and where did you buy it.
@vfr800fi07Ай бұрын
It was around 800.. and I got it from RAM online . Shop different RAM sites for best price
@rnr1880Ай бұрын
What are the torque specs for the breaker? Trying to find that info out and can, wanted to install a 50a breaker for mine
@vfr800fi07Ай бұрын
40 in/lbs
@rnr1880Ай бұрын
Where do you find that info? I cannot find it in the install manual?
@@rnr1880 look up product datasheet towards the bottom
@rnr1880Ай бұрын
Oh ok so the breaker information sheet has it not necessarily chargepoints instruction. Makes sense now. Thank you so much! And great job on your video, very nice work.
@AMERICANMODIFIEDАй бұрын
Hi, I like your content. Do you accept sponsored products?
@vfr800fi07Ай бұрын
I'm open to anything really.
@AMERICANMODIFIEDАй бұрын
@@vfr800fi07 How can we further conversation?
@AMERICANMODIFIEDАй бұрын
Do you have an Instagram account or an email address?
@vfr800fi07Ай бұрын
@@AMERICANMODIFIED [email protected].. indonhave a Instagram too I don't use it much at this time.. but I believe it's shoupmark
@AMERICANMODIFIEDАй бұрын
@@vfr800fi07 Have just sent your an email.
@wootofАй бұрын
great video. i have a 2021 dodge ram 1500 laramie. i'm trying to add the adaptive cruise. everythhing went great except for the Security bypass cable from Kaodtech. the connectors are both white in color. (not green & white) one connector fits the the green can buss but the other connector does not fit the white can buss. i've tried to contact Kaodtech but haven't heard from them. just wondered if you have heard of any proble like this? with just the green can bus connected i can remove the old cruise but unable to ad the ACC..
@vfr800fi07Ай бұрын
I'm not sure about that bypass.. I have a tazer in mine which doesn't require anything tied into the can bus
@wootofАй бұрын
@@vfr800fi07 got the bypass figured out. if you have time, the ACC is present but when i turn it on i get message that the forward radar sensor is in plant mode. any suggestions?
@vfr800fi07Ай бұрын
@@wootof do you have the radar system on the rear view mirror
@wootofАй бұрын
also i think this might be the most relevant: code c2206 These codes mean that there is communication codes present in either the ABS module or other modules on the vehicle, a bad ABS module or the wrong VIN is programed into the PCM.
@vfr800fi07Ай бұрын
@@wootof I know there is a specific abs module you need
@user-fo4wg5gu9vАй бұрын
What cable is needed for chrysler jeep or dodge 2018+ 2019 2020
@jmo7193Ай бұрын
Where did you get the sports hood?
@vfr800fi07Ай бұрын
I got it from Carid. They sell OEM parts
@keeto1234562 ай бұрын
Sorry if I posted this question twice but I have a 2024 1500 limited. Can I add the ACC to it like this?
@vfr800fi072 ай бұрын
It depends if you have the other necessary equipment.. like the forwards camera in the windshield. The TRX comes with all of the stuff needed on all models
@gearjunkie34022 ай бұрын
It must use wheel speed sensors to measure mph. Older vehicles when changing gears the speedometer would be way off! Like my 4.88's in my old Mustang, lol.
@vfr800fi072 ай бұрын
Yes that is exactly correct
@vfr800fi072 ай бұрын
The only thing that will affect the speedo is tire size changes on these
@MADMAX3532 ай бұрын
Well done sir!
@vfr800fi072 ай бұрын
Thanks!
@joedelucia57792 ай бұрын
Did you ever do a video on the install? I can't find it
@kimpierce12402 ай бұрын
How do you remove the air intake cover? Need to clean my filter.
@vfr800fi072 ай бұрын
The top just pops off.. start lifting it from the rear first.. it will pop up
@rcvvlogs88672 ай бұрын
So for the fuel system since it’s flex 93/E. Are you flashing tunes b4 you swap? Or just fill and go (obviously down to E) to change. I’m using rtd for my car
@vfr800fi072 ай бұрын
You mean flashing for fuel swaps?. No it changes on its own.. but it has been calibrated for both
@rcvvlogs88672 ай бұрын
@@vfr800fi07yes, that’s what I meant , because nowadays I have to flash the fuel b4 I start up, so with this I assume I can just fill and go with no other steps
@vfr800fi072 ай бұрын
@@rcvvlogs8867 yeah it adjusts the time based on E content automatically
@rcvvlogs88672 ай бұрын
Yo is this the one for sale in Huntley?
@vfr800fi072 ай бұрын
Yes
@vfr800fi072 ай бұрын
Yes
@vfr800fi072 ай бұрын
They really have no clue what's done to it
@rcvvlogs88672 ай бұрын
@@vfr800fi07I was thinking about checking it out! Maybe trading something for it in. Is she all good ? Thanks love the content
@vfr800fi072 ай бұрын
@@rcvvlogs8867 it's all good.. if you buy it I can fill you in on where it's all at.. pretty much everything is in on the videos