Life After ClearOS and CentOS
2:17
Пікірлер
@kakaka1k
@kakaka1k 5 күн бұрын
This is just perfect for me, I have a soyo rx 5700 xt. I've been having one issue with it, I try to loadnin Star Wars Battlefront 2, game crashes on me and black screen on my both monitors, GPU drivers get corrupted and pc shuts off, I power it on andninly 1 monitor works, drivers are corrupted and I need to uninstall all my Gpu drivers and reinstall it. I found a way to go around that crash, was to force shut off my pc and it would not corrupt my drivers but its annoying. Had to uninstall Battlefront 2.
@Le.Flamme
@Le.Flamme 5 күн бұрын
I need to buy a wifi card for me to enable wifi?
@JordosTechShack
@JordosTechShack 5 күн бұрын
This is the first one to have issues, and it was 16 months later. I have ordered 13x 5700XT's, and over 23 Soyo Cards counting the 5700XT, 5500XT, 580, 560XT, and 6600m models.
@anniejca2002
@anniejca2002 8 күн бұрын
Hi, I was just wondering, is the bios upgradeable and if so, what is the website for support?
@JordosTechShack
@JordosTechShack 7 күн бұрын
Their official page says to reach out to their AliExpress store for the bios,. I did that but they never replied to my emails.
@pjpaez
@pjpaez 12 күн бұрын
Total sadness... appreciate your video🥲
@massimogiussani4493
@massimogiussani4493 12 күн бұрын
Hi, nice video! Can you upload the bios dump of your MR9A-PRO to your website ( jordosjank jcmptech )? Thank you! :)
@qwerty32185
@qwerty32185 13 күн бұрын
how did you turn on the rgb on those fans? The mobo does not have any rgb connetors.
@JordosTechShack
@JordosTechShack 13 күн бұрын
@@qwerty32185 it's not software controlled by the motherboard. The case came with fans and an RGB fan controller. It's pretty common with the cheaper fans use their own proprietary connector and RGB controller. They have a motherboard pass-through if you want to use your mobos 3/4 pin connects and software to control it. Even more expensive fans like corsair's iCue fans use their own proprietary connectors and a RGB controller that plugs into the USB header. The addressable and programmable RGB stuff actually started with the case and accessory manufacturers doing their own thing before the motherboard manufacturers started adopting 5 volt 3-pin and 12 volt 4-pin standard connectors.
@DM_3456
@DM_3456 14 күн бұрын
Is it dual channel supported?
@JordosTechShack
@JordosTechShack 13 күн бұрын
Yes
@rozzamatron.
@rozzamatron. 16 күн бұрын
Does it support resize bar?
@JordosTechShack
@JordosTechShack 13 күн бұрын
Yes
@finnenoksen31
@finnenoksen31 18 күн бұрын
I just got the same thing and I love it too
@iguanac6466
@iguanac6466 22 күн бұрын
Ah, man...I'm just finding this out. This sucks. I chose ClearOS because it was pretty easy to get running and it was linux based so driver support was better than PFSense (based on FreeBSD).
@markelsubban9765
@markelsubban9765 25 күн бұрын
sad year ..have using clearos about 15 years working with sophos and opnsense. but so far like sophos
@BudgetBuildPCs
@BudgetBuildPCs Ай бұрын
That case is diabolical lmao probably the worst I’ve ever seen. Good video man
@CPBOXFIXR
@CPBOXFIXR Ай бұрын
I bought the ELSA 5700xt to test last year from aliexpress for $130 shipped. I was shocked how well it performed and it only uses 140 watts at max.
@ShivamGupta-qh8go
@ShivamGupta-qh8go Ай бұрын
i dont understand , why does NVIDIA not have the drivers for the GPU ??? how is it not their responsibility to give drivers?? am i missing something?
@JordosTechShack
@JordosTechShack Ай бұрын
I go over it in the second video. NVIDIA requires mining and certain soldered mobile gpus to be driver signed and verified by the board partner. If a board partner abandons or otherwise obsoletes the product then no new drivers come out. I had a similar issue with Sony laptops and their soldered gpus. I created a similar driver for those laptops that spoofed the driver signature so that windows thought it was a module mobile GPU and not a soldered one, and would allow you to install and update the newest Nvidia driver. This is also why if you buy one of those sketchy AliExpress mobile gpus repurposed as a desktop GPU you need hacked drivers to get them to work properly. It's strictly an Nvidia artificial firmware limitation. You can get Radeon 6600m repurposed as a desktop card and they don't require any of the driver hackery Nvidia salvaged cards do.
@ShivamGupta-qh8go
@ShivamGupta-qh8go Ай бұрын
​@@JordosTechShack so you buy a NVIDIA card and NVIDIA gets to decide what you use it for ?? weird also, its impressive how you could write drivers and stuff by yourself... where do you even learn that kind of stuff?
@JordosTechShack
@JordosTechShack Ай бұрын
I had a client who had a ton of Sony laptops. Sony stopped updating the GPU driver for it and they used it for CAD and needed the newest driver so I learned how to spoof firmware and driver signing. I use existing patches and exploits made by people who know more than me (I link the projects on my site and in the description). They all refuse to host prepatched drivers, because of Nvidia and proprietary software so the host the exploits and patches separate and you have patch and test the driver yourself. I am not worried about Nvidia sueing me so I took the extra steps of pre-patching and hosting a completed driver. I have more info on everything and benchmarks gaming here" kzbin.info/www/bejne/sJSWfquCd7OrrJIsi=EErc5VaOvbiaabrh
@ShivamGupta-qh8go
@ShivamGupta-qh8go Ай бұрын
@@JordosTechShack its just so interesting to me, how there is this whole world of firmware, exploits etc.. and i never even imagined that Nvidia will be doing stuff like this, like limiting the usage of GPUs ( in my opinion it is wrong , there might be more angles to it, but i am not aware of them yet ).... and the fact that people can write drivers, that's just magic to me to be honest. I come from coding exclusively in high level languages, so maybe that's why i have this perspective. I will definitely have to check the projects you link... any other resources you can remember that helped you learn all this? also, what a mad thing to say, that you are not worried about Nvidia suing you.
@Shpinog
@Shpinog Ай бұрын
My advice is it works on p106 and 99% will work on p102. You don’t have to connect via remote desktop, but while playing in the task manager, just disable\delete the AMD driver so that the driver for AMD becomes something like “basic microsoft graphic driver” and everything will work on p102
@JordosTechShack
@JordosTechShack Ай бұрын
I was only doing it for benchmarks and the video. I am running windows server 2022 on bare metal. so it's headless most of time, and things like AI, CUDA workloads, and NVEC encoding can't use the Radeon card so it's not a problem.
@mhwh.service
@mhwh.service Ай бұрын
ClearOS Dead. Unfortunately the project is completely dead, all their mirrors and sites are no longer available. It's very sad to hear.
@mhwh.service
@mhwh.service Ай бұрын
ClearOS project dead. Unfortunately the project is completely dead, all their mirrors and sites are no longer available. It's very sad to hear.
@DHBRFT786
@DHBRFT786 Ай бұрын
Motherboard with no io shield is diabolical
@jk-mm5to
@jk-mm5to Ай бұрын
Awesome channel. Thanks for great info!
@JordosTechShack
@JordosTechShack Ай бұрын
Thanks, glad you enjoyed it!
@tennyson4830
@tennyson4830 Ай бұрын
How low was your ping???
@dragnel
@dragnel Ай бұрын
cute assistant😊
@minuisiklik3489
@minuisiklik3489 Ай бұрын
what form factor is it? mATX or ATX?
@JordosTechShack
@JordosTechShack Ай бұрын
matx, actually a half a slot smaller than spec Matx
@PizzaUndervolt
@PizzaUndervolt Ай бұрын
There is an awesome modding tools for Polaris Bios called Red Bios Editor that can greatly increase efficiency, i had a chinese 580 2048sp (basically a 570) where the standard vbios clearly gave too much voltage.
@PizzaUndervolt
@PizzaUndervolt Ай бұрын
as a computer builder, i can't agree more on watercooling, it's a gimmick for visual and at best useful for shipping safety, but the risks are too high in return, i try to force every customer not to get it
@fonzaman
@fonzaman Ай бұрын
did you run windows 10 or 11 ? im having usb issues on windows 11 with this motherboard when trying to use a capture card on it it just disconnects , windows 10 seems to run ok , minus not recognizing my ps5 controller
@nicklem9846
@nicklem9846 Ай бұрын
any chance of getting picture out the hidden hdmi port in asus p106-100?
@dividead100
@dividead100 Ай бұрын
The case is quite good for its size, can be had with metal side panels and the listings I've found are quite clear as to what they will or won't send you. Just buy a local PSU you trust.
@AXLDark
@AXLDark Ай бұрын
Mine wont even turn on, confused
@shyne7239
@shyne7239 Ай бұрын
Yh same have you fixed and how?
@freedomination2
@freedomination2 Ай бұрын
I have the exact card. GPUZ shows PCIe x4 1.1 ??? Would that be enough for gaming? Linus Tech Tips and one of his techs got one to function at PCIe x16 1.1! You should check out the video: kzbin.info/www/bejne/ioqXpGZrqrp_nZY Edit to add: What bios version do you have? I really need to know.
@JordosTechShack
@JordosTechShack Ай бұрын
I did a full updated video on gaming the bandwidth limitations, my driver, etc: kzbin.info/www/bejne/sJSWfquCd7OrrJI
@shadow19121
@shadow19121 2 ай бұрын
Th case is $52 on AliExpress right with a pcie 4.0 cable have worked in these type of cases before I’d say that’s fair.
@JordosTechShack
@JordosTechShack 2 ай бұрын
@@shadow19121 this video is a year old at this point. The case was $152 when Jeffy ordered it.
@Alejandro-md1ek
@Alejandro-md1ek 2 ай бұрын
Good
@mr.transistor2823
@mr.transistor2823 2 ай бұрын
Where is UMA Buffer Size in bios on this motherboard? Need to extend igpu vram.
@TysonIsTyson_
@TysonIsTyson_ 2 ай бұрын
So does the motherboard need drivers updates ?
@JordosTechShack
@JordosTechShack 2 ай бұрын
@@TysonIsTyson_ It's a standard B450 chipset so you update them through AMDs website. On the Machinist section of my downloads site I have direct links to everything. I plan on expanding and hosting bios files for these motherboards as well. JordosJank.Jcmptech.us
@ianmanalaysay9633
@ianmanalaysay9633 2 ай бұрын
Hi! I'm stucked with 2667mhz even though my ram frequency is 3200mhz, processor is ryzen 3 3200g, may I know if there's any way to change the ram frequency using xmp?
@maxmax-xx7nw
@maxmax-xx7nw 2 ай бұрын
So I have this card and adding capacitors to the pci lanes does nothing, maybe there's no physical connectors in GPU or it's bios blocked, in GMP series adding caps unlocks pci x16, in p102/p104 unfortunately it does nothing 😅
@Drak_Thedp
@Drak_Thedp Ай бұрын
It's either bios-locked or some die stuff going on, because people tried to transplant these chips to full 1080ti boards and it only worked with their original bios and had 4 lanes...
@maxmax-xx7nw
@maxmax-xx7nw Ай бұрын
@Drak_Thedp so there's a chance it's bios blocked, if that card could go x8 at least it would be monster for the money(25$)
@JordosTechShack
@JordosTechShack 2 ай бұрын
Download the hacked Driver, as well as bios dumps from SOYO and Machinist here: jordosjank.jcmptech.us/
@wolframgrziwa9086
@wolframgrziwa9086 14 күн бұрын
You have a link for the driver without the NVEC option but apparently it is not working or uploaded (yet?). I have seen some crashes since I installed the driver and suspect that at least one of my P102-100 cards doesn't have NVEC capabilities. I don't know if there is a way to check the cards but based on your information that may be the cause of the crashes. BTW - this was exactly what I was looking for. The main reason being that the "nvcleaninstall" driver generator using the consumer nvidia drivers only supports TCC mode which works great for CUDA under windows (running Ollama or other compute applications) but for virtualization passthrough using Docker/WSL2 WDDM mode is required. Some posts suggests that the ability to switch these cards has been disabled at some point by nvidia and now requires their vGPU drivers. Thanks for your work saving me the effort to try and apply the dartraiden patch myself🙂
@white7bro992
@white7bro992 2 ай бұрын
I am going to buy it..thx for your video
@Titax69
@Titax69 2 ай бұрын
Is this still available on AliExpress? It's not showing up for me
@white7bro992
@white7bro992 2 ай бұрын
@@Titax69 I will tell you if I found
@leilab8031
@leilab8031 2 ай бұрын
I’ve just ordered one of these as my 1050ti has packed in, I’m a bit wary of switching to amd but it’s considerably cheaper than a 3060 12gb which isn’t much better
@JordosTechShack
@JordosTechShack 2 ай бұрын
I've been running it about a year. Gaming on 2x1440p umtrawides, and it's rendered the last 32 videos and 9 live streams on my channel. I use its encoder for all the screen capture. One of my customers (Jeffy) bought one for his secondary PC and was very happy with the switch from Nvidia. In fact when another customer came in to have me upgrade him from a 6850XT to a 7900 XTX. Jeffy bought his 6850XT to upgrade a failing 3060 12GB in the main rig. He's all AMD now and regrets nothing. AMD will never take the bleeding edge crown for graphics cards, but dominated the budget and price to performance mid tier.
@leilab8031
@leilab8031 2 ай бұрын
@ glad to hear it’s good, I physically couldn’t find any NVIDIA graphics card worth buying around £120-140 that could compete with this card
@nightech1780
@nightech1780 2 ай бұрын
Will ryzen 5 1400 work?
@JordosTechShack
@JordosTechShack 2 ай бұрын
Yes
@BlutoSlice
@BlutoSlice 2 ай бұрын
I bought one of these, it works but I get 100% fan speed even at idle. Adrenaline / afterburner curve tweaks dont work and all monitors show 0RPM , anyone have a fix for this?
@JordosTechShack
@JordosTechShack 2 ай бұрын
None of the ones I bought do that, every card ive ordered works fine in afterburner for fan curves.
@muhammaddino5140
@muhammaddino5140 Ай бұрын
I had similar issues, use an older version of adrenaline software/drivers. The latest updates tends to mess up things
@EvilGrillCheese
@EvilGrillCheese 2 ай бұрын
I have never recieved a good card from them.
@Владислав-в8ы6л
@Владислав-в8ы6л 2 ай бұрын
Pcie x4 1.1
@freedomination2
@freedomination2 Ай бұрын
I see that. Linus Tech Tips and one of his techs got one to function at PCIe x16 1.1
@wind5250
@wind5250 15 күн бұрын
@@freedomination2 i've done this but it's not really worth it because you only gain about 3-5% boost . If you want to do it you need only resolder the filter caps that are obviously missing from the pcb. if you look on the back of the card just above the pci-e connector you can see them looking like this : : : : : : : : : : : : : : : : : : : : . If you can solder well it's not that hard but again it isn't worth the time effort or cost just buy a better card for 20-50 bucks more.
@abbadacedda469
@abbadacedda469 2 ай бұрын
What kind of token rates do you get on llama3.1:8b?
@JordosTechShack
@JordosTechShack 2 ай бұрын
​@@abbadacedda469 unfortunately I am running windows server with the Windows version of Ollama and I don't have any benchmarks for it in Windows yet. Everything is bare metal server 2022, the only docker container is for the Webui. This video was made the same day I opened the graphics card and made the driver. Everything was done in one day, and uploaded the same day. It was the only day I didn't have anything booked out in my shop or in the field . I'll get benchmarks and at least one more video up by this weekend.
@abbadacedda469
@abbadacedda469 2 ай бұрын
@@JordosTechShack Understood, sounds like you're busy! No rush, was just curious. Thanks for the response!
@hypershot3197
@hypershot3197 2 ай бұрын
Have you had any luck in terms of gaming? I saw another video out there where they were testing a p104-100 instead of this varient, otherwise there isn't much information out there for this card in that respect.
@JordosTechShack
@JordosTechShack 2 ай бұрын
I haven't ran any games since I am running server 2022. But I do plan on running some game engine based benchmarks, and two of my regulars who I do projects for on this channel, each ordered one after they saw this video. So I will have more content on this card coming out. Its essentially a cut down Titan die, so close to 1080ti in die comparison. However to make it better for mining they cut it down to 4 lanes of PCIE 1.1. It can be modified to be x16 with some surface mounted components but its still 1.1. The driver makes it show up as 10GB 1070, but regardless of PCIE bandwidth restriction if you have an igpu its definitely worth it at the $40 its going for now, but I wouldn't expect 1080 or 1070 performance with the PCIe restrictions.
@maxmax-xx7nw
@maxmax-xx7nw 2 ай бұрын
​@@JordosTechShackhow do you know it can be unlocked to x16? I just got one of those, I see missing caps, gonna place them soon but it says pci x4 @pci x4 in gpuz, so it means it's bios blocked ? Or there are some other components missing on board, gonna take a look anyway
@JordosTechShack
@JordosTechShack 2 ай бұрын
I haven't done it, but my original reddit post on the driver hack I made, people were commenting it's been done by a Russian based YT channel. I haven't seen the video myself but others on Reddit have said it's been done.
@maxmax-xx7nw
@maxmax-xx7nw 2 ай бұрын
@@JordosTechShack I've seen video where the guy adds capacitors to CMP mining card by Nvidia and it works 16x then, but it shows pci x16 @ PCI x4 originally in gpuz, also seen on some forum they say some of the p102 and p104 will work as x16,not much info tho
@JordosTechShack
@JordosTechShack 2 ай бұрын
Uploaded as new video gaming performance. Better than I expected.
@JordosTechShack
@JordosTechShack 2 ай бұрын
It went from just a driver link, to a full support site for the driver hackery and Off brand Chinese products I use and feature. JordosJank.Jcmptech.us
@javi1555
@javi1555 2 ай бұрын
Support ryzen 5 4500?
@ferale2510
@ferale2510 27 күн бұрын
Yes, I ordered 1 the last Black Friday and works with ryzen 5 3600 and ryzen 5 4500
@ConstWanderer
@ConstWanderer 2 ай бұрын
Thank you very much for the review. I'm also bought that new am4 white motherboard of chinese brand from aliexpress and now waiting for delivery. Glad that new motherboards on b450 chipset that include work of old Ryzen 1st and 2nd gen are still being produced. First wanted to buy chipset B550 with PCI Express 4.0 for a future upgrade, but then I found out that it doesn't support older generations of Ryzen, and when buying any new Ryzen of Zen 3 gen right away, there would be a temptation also to buy a new video card like RTX 4060 with the last money. But for Ryzen 5 1600, economical GTX 1650 would be enough
@JordosTechShack
@JordosTechShack 2 ай бұрын
I paired this one with a Ryzen 2600 and a RX560XT for my daughters Roblox build. It came out really clean when the build was done. The build video is here if you haven't seen it i go over a little more about the motherboard. kzbin.info/www/bejne/pqSQk3trn9NgoZI
@THiNK103088
@THiNK103088 2 ай бұрын
Now the real question does it work with ryzen 7 5800x3d 😅
@JordosTechShack
@JordosTechShack 2 ай бұрын
It does. I go over it a bit more in the build video. kzbin.info/www/bejne/pqSQk3trn9NgoZIsi=5iUVUiyC04E4IaOK
@THiNK103088
@THiNK103088 2 ай бұрын
@@JordosTechShack sick mate! Thanks a lot! Watching the vid now!
@_vez
@_vez 2 ай бұрын
The case is the least of the problems tbh
@JordosTechShack
@JordosTechShack 2 ай бұрын
Definitely the motherboard with corrupt bios and the bent pins was worse. The only real problem with the case, and even that might have just been Jeffy buying from the wrong seller, was the high price. Everything that went wrong with the build could be summed up with "Jeffy ignored my recommendations and ordered from the cheapest seller he could find, regardless of store/seller rating".