Do your other charge controllers have USB ports? How tiny are the connection screws? On another low-end controller, I've had trouble getting them tightened down. Thanks.

It's a bummer that we have to buy this feature when its free on windows! Do better apple! Or don't, i'll still buy your products :(

put its max solar threw this and make sure its rated for the 10AMPS i blew mine up trying to put solder on the heatsink parts on the back of the controller and blew something lol so yeah i have to buy a new one and test the 10AMP rated compacity since i didnt have the means to do so back then lol now i have enough solar panels to check the max AMPS on this controller

i just bought the BT1 blueetooth modual that you can hook up to this controller to set peramitors and and all that so very very good controller for the money

yeah i bougth mine a year ago and ove used it a bunch and man its so good for the money. also this controller tells you how many AMPS its pulling and all that very good contoller for the money for sure its a great contoller for begginners

Hello, I am able to move windows into their respective panes, but as soon as I click on something else, the other panes get minimized and only the one most recently clicked on stays up on the screen. In other words, the panes don't persist to where I can have multiple up at once. Kind of defeats the purpose of the app. I hope this makes sense. I am sure I am doing something wrong based on the excellent feedback of the app. Thanks!

No longer three dots. Google, MS, DropBox, etc. options

What is a E14 error

Very helpful thanks alot

My LiPo battery has a USB wire. If I connect my solar panels to the given port and my LiPo to the USB port, will it work (without the use of a battery in the bottom port as you did with the 24V battery)? My LiPo battery is powering my RC car and I want to use solar to recharge my battery. Just to be more clear, my LiPo has power wires (which go to the car) and USB wires (which connect to a USB cable)

I bought one of 5hese a year ago to operate a 100 watt harbor freight solar panel works great no disappointments I'm satisfied way it performs

The audio is terrible you should throw some autotune and reverb on it like T-Pain :D

hello how are you why you replace the nest thermostat and use ecobee 3 i know nest number one

Sold. 🙌 Now I gotta somehow uninstall that rectangle that says it's open and refuses to show itself 😅

Thank you soooo VERY MUCH! This was super helpful. Keep on doing what ya doin"!

Thanks this was helpful

I am not able to click that option 49 participants

I am not able to click that option 49 participants

I am not able to click that option 49 participants

Thank you for posting this helpful video

Hey man, quick question for you. You seem like your knowledgeable. So I accidentally had my wanderer on the wrong battery setting I had it on sealed when it should have been on flooded. I just realized my mistake. Could that possibly be why my batteries aren't charging properly and my battery life has been garbage? I appreciate any insight you might have.

Does this work with an external monitor connected to a MacBook Pro ? If the monitor is big, can I split in 6 screens ?

"Promosm" 😅

super helpful!

Just bought one of these to trickle-charge my Camaro. Hope it works well. Looks like it does. Too bad the wire clamps cannot accommodate a larger gauge wire.

What is the supply voltage for this voltmeter?

i love you, i bought a meter that i thought i blew up after getting it since other tutorials didn’t work yours instantly worked.

If by chance you receive a EO1 Code on a 12 volt system, then more than likely you installed the battery connections after the solar was connected. The E01 error appearing is when the controller has inadvertently been calibrated for 24V. This means that the controller will automatically calibrate for the proper system voltage. However, with this type of controller it is essential for the battery bank to always be connected to the controller first. This allows the controller to calibrate for the proper system voltage. If the solar panels are connected first, the controller can see voltage upwards of 19V-21V. When connected first with this range of voltage, the controller will calibrate for a 24V system. Then, when the 12V battery is connected, it sets off the E01 code thinking that it is an over-discharged 24V battery bank. To recalobrate follow the following: 1. Make a note of the 4 wires before disconnecting. You can use masking tape to write solar +, solar -, battery +, battery - on the 4 wires so there is no confusion when reconnecting. 2. Disconnect the solar leads from the front of the controller, starting with the negative. 3. Disconnect the battery leads from the front of the controller, starting with the negative. 4. Wait 5 minutes 5. Reconnect the battery leads to the front of the controller, starting with the positive. 6. The controller display will light up. Wait 1 minute to allow the controller to calibrate. 7. Reconnect the solar leads, starting with the positive.

Thanks, that was helpful!

Thanks!

Is it just me, or is the audio in this video really low????

Thank you really helped!!!

You sound a little like Joe Pesci

Solar Tip: You can steplessly dim down a bulge and all other hungry electricity consumers with a 5000W dimmer (7, EUR). I run 5 dimmers in parallel on an 850W inverter. Kettle 2.2KW at 150W runs 12 hours a day, so the water is always hot. The room is also nicely heated. 2.5KW washing machine runs in parallel with dimmed to 200...400W. Iron, dishwasher, oven, electric heater, coffee machine, all internal heating are throttled with me. Videos about it on my channel kzbin.info/www/bejne/m3SVoJ-YeKebnpI The inverter stays cool, quiet and the MOSFETs remain intact because extreme current peaks no longer arrive at the inverter. Now every Mini PV Inverter is enough to sell large devices...

thanks for this . I find it annoying for it automatically go FULL SCREEN mode. I didnt know I can change this in settings. Godbless

Curious how yours is doing after 10 months, got one and after 3 days it failed in 2 different ways and tried to over charge a battery. Even with all settings changed.

Good video bro, may I ask what Gauge you connected to the PV on the solar charger? I connected a 12AWG and some how they come loose, thanks

mine is connected to a 12v battery reading 13.1v but nothing's happening when I plug phone into USB ports. Any thoughts?

That's strange. I just got mine controller and mine does not show lithium battery option

Super helpful, thanks

Hello, coud I have a one question if you don't mind? Actually There is a window screen size that I use frequently, but It is not easy to adjust it every time. So If you set it once, Is there a function to save and load it when I use?

Thank you!

I have connected everything like you, but it is not drawing any power from the solar panel. Full sun, green light flashing on the back of the panel. Any ideas why?

I found a group, and I do not see the "Register for Blitzr". I am signed in

Well, there's maybe the worst audio in a youtube video ever.

Very helpful, thanks

excellent!

Thank you.

Your dumb my guy you can use the controller to click continue just to finish updating it rofl

Hi friend , I have a solar system around 1920 watts day , kit solar 100 watts , I need to connect the system to AC loads , I need the inversor plus this device right ? This device only works with dc loads