Perfect! It worked. Happen to have the exact model i have.

I don't see where you work back or front the vehicle and the spots

11:45 my brother, thanks to your video, I was able to diagnose that I had the same problem you did. I ordered an eight dollar part from Amazon and fixed it myself. That thing was nasty, but the brush knocked it right out. Thank you for posting the video

Whats the size of the hose?

Is this a how to open your hood lesson or what. 😂 Good grief. Terrible video quality.

You just hit thr clean button again and it stops blinking.

Would of been really helpful if you showed how you go the agitator off

brilliant ... thanks!!!

Dishwasher water comes up in both sinks now both sinks water keep going from one side to another. What do you think is the problem

Sucks

Thank you, thank you, thank you. This fixed work. I didn't use the t-shirt for fear of it getting stuck, but removing the hose and cleaning the spot that the hose connects to the disposal with a thin brush for pipe cleaning did the trick. PLEASE NOTE: It's important to clean the hose out and the sopt where it connects to the disposal.

Woo hoo thanks for the info. I’m all reset !!

Thank you! I bought a condo recently and it has one of these washers. I've been scouring the internet for answers on how to take it apart so I can clean it and Google's AI search has basically destroyed the ability to find factual or pertinent information. I saw dozens of AI-generated 'help' videos that were instructions for a completely different washer. I talked to a help-bot on a washer repair site that also used the same completely different washer instructions. NOW I can finally get this thing apart without any extra unneeded steps (I would have taken off extra screws from the back for sure.

but why does it keep breaking every 5 loads or so? my washer been doing that months

Very helpful😁thank you

1:29...."No and Then" cant help myself had to say it..getting frustrated w my washer here i guess

Thank you. I just fixed my none drainage problem. My air gap was clogged. Whew!

Thanks for uploading this video & thanks for sharing the scriptures in the video.

How did you get the agitator off?? Like yours mine wont budge!

Would this issue cause the machine to shake real bad and move out of position?!

most mechanics recommend to pre-fill the old filter so there is not a time with no oil being pumped in the car.

Very painful to watch. Do a dry run before recording.

Dude you talk waaaaaay too much. You could've did that in 30 seconds! 🤦🏾‍♂️

What cubic is this machine

Great video. Thank you. My next car is going to be a Tesla. Lol

Thanks for the video. After fixing the air gap backup, I ran the rinse cycle and noticed a foamy water solution at the bottom of the dishwasher. Do you know if this is normal?

THANKS A LOT you have been very helpful appreciate your help God bless you

appreciate the effort, but resolution is pretty bad. damn close to unreadable.

'Alright here... i have the service manual...' 0:41 please explain how you get your hands on this and the rest of the video is unnecessary...

The pad with the screecher goes to the inboard side with the screeched to the top.

I to have some similar symptoms. I am curious about what the end result was, but was quickly amazed at how much tubers were more interested in the drama over what the washplateagitatorpulsator was called…..😂

I have a expert system with auto level, at the end of tge cycle all the lights runs across instead of just turning off is that normal? Also when its filling water it makes a clicking sound maybe ever 15-20 seconds

I have tried everything but my whirlpool will not go into calibration mode please help

My garbage disposal has something inside, how to remove it

i cant even get this thing to start.what setting do you use for a medium load of clothes? please help!!

Amazing! I am baffled. Haha. We just found ours following this tutorial. I feel like we just discovered a special ancient text not meant for my plebeian eyes. Sadly, it doesn't have what I was looking for in it, but getting to this point was half the battle. Thank you!

Holy smokes I just found so much crud clogging up my air gap! I was able to pluck it out and I'm hopeful that's the end of my clogging issue for now 😅

When removing and installing screws I suggest using a magnetic tip in your screw gun or magnetic screwdriver.

Thank you so much for making this video! Now I can spend a few bucks instead of buying a new washer or paying someone to fix this. Thank you and God Bless!

Biden is sending the FBI to arrest you for spreading Mis-Information.

This is the best brake video I have seen. Please make more for different things.

My whirlpool had this code F7E1 and I replaced the shift actuator but it still wasn't spinning. I then replaced the capacitor and now it works fine. Thanks for the video!

Why did it get low in the first place?

A bad hub will do that

Thank you!

This is not the correct way to run the cleaning cycle and clean your machine. You do not dilute the vinegar, you only fill to four cups and then you let the cleaning cycle run all the way through, you don't stop and restart it. After the complete cycle completes, then the light will go off.

Thank you! You made my job so easy! BTW, putting the hub on before putting the drum back n is definitely best.

Thankyou sir I used a snake we are bone dry now !!

Thank you sir. experience the same issue with mine. I bought a old 03 Tahoe for a good price but the heat wasn’t working in the rear now it is thank you again.

I also had similar code. Mine was making a whirling noise during agitation. What I found was the sure way to test for a bad hub that is stripped. If you spin the agitator and the drum doesn’t move with it, either the hub is stripped or the agitator threads are stripped. They both should move. Another test I did was to take the hub off and go to diagnostic mode and see if sound is gone. If so it is the hub. $15 part so you can keep an extra on hand.