Unboxing of Ring Dorbell Chime
10:05
Пікірлер
@leon-set
@leon-set 2 күн бұрын
If i can get my hands on one of the programmers i will finally able to fix my locked t490❤ thanks brother for sharing all your information
@fluidfix
@fluidfix 2 күн бұрын
Good luck! Hope you can get it soon - if i remember correctly there are people using ch341a that is inexpensive option for you and if i remember they managed to do it with that one - look it up in my comment section. Stay safe and happy.
@jeffguan3786
@jeffguan3786 12 күн бұрын
Is it possible to still auto patch my corrupted bios? I tried it once before but I got my t480 bricked because I selected the wrong IC in AsProgrammer but now I am using NeoProgrammer and it only detects only one IC.
@fluidfix
@fluidfix 11 күн бұрын
Hey. WHen you have one ic connected it will detect only 1 ic or am i wrong? If chip is not damaged then you can reflash it many times. Now the question is - did you damaged the chip by chousing different one before and supplying it with incorrect voltage as many chips work on different voltages like 3.3v 1.8v 1.1v etc. I wish i could help but im just a fool my friend. Stay safe and happy.
@swa-darshan
@swa-darshan 17 күн бұрын
Can also try to run command as administrator: DISM.exe /Online /Cleanup-image /Restorehealth It worked for me and for few others as well. I believe the essence of it is the same, but to run this command seems just a bit more simple and easy to me? As long as you have the repair background ofcourse
@universe3000HD
@universe3000HD 23 күн бұрын
See with the usb type see cable behind wouldn't this be easy for thieves to disconnect?
@fluidfix
@fluidfix 22 күн бұрын
Hey that is valid point but to get there they would have to be recorded and you would get alerted by then, as well they have inbuild battery space and if you have battery it will keep working. Stay safe and happy.
24 күн бұрын
Done with NEC vkt16xzg2 using Lenovo Bios. Stay safe.
@fluidfix
@fluidfix 24 күн бұрын
Cool next lvl s...t stay safe and happy.
@s.a3898
@s.a3898 26 күн бұрын
Just curious, what temperature did you use on your hot air station to desolder the bios chip?
@fluidfix
@fluidfix 26 күн бұрын
Hey. Technically you should use as closest temp to whatever solder needs that was used that is the best and safest option but with new boards that have lots of heat dissipation capability inbuild by design that is very long without preheater that i don't have. I don't remember now exactly but i would have it set at 350 Celsius and 60% air if tuff board that have big heat dissipation i would go up in temp rather than air flow when working with smaller components i would as well lower the air flow but up the temp. I'm just a fool so i might be doing it completely wrong. Stay safe and happy.
@billcarson9565
@billcarson9565 26 күн бұрын
great vid, what microscope are you using?
@fluidfix
@fluidfix 26 күн бұрын
Hey i use koppace microscope that i love. Stay safe and happy
@billcarson9565
@billcarson9565 26 күн бұрын
Great vid, Subscribed! where are you based?
@fluidfix
@fluidfix 26 күн бұрын
Thanks for the sub! UK. Stay safe and happy.
@balhazmi89
@balhazmi89 26 күн бұрын
It worked. Thx man.
@fluidfix
@fluidfix 26 күн бұрын
Glad it helped. Stay safe and happy
@donkal_
@donkal_ Ай бұрын
Do you know a way to "reverse" the magnet for the bits? My bits that are not from the screwdriver brand and do not hold. I can't find anything on the internet.
@fluidfix
@fluidfix Ай бұрын
no clue about that.
@Trivia-s2e
@Trivia-s2e 9 күн бұрын
you can buy magnetizer
@s.a3898
@s.a3898 Ай бұрын
Would this work on the lenovo yoga x380? It is an 8th gen chip?
@fluidfix
@fluidfix Ай бұрын
MAKE A BACK UP AND TRY - THAT IS WHAT I WOULD DO I NEVER HAD IT DONE ON THIS SO I DONT KNOW STAY SAFE AND HAPPY
@s.a3898
@s.a3898 Ай бұрын
@@fluidfix Thank you for taking the time to reply. If, let's say I mess up, will everything be fine be simply reflashing the chip with the backup? I had always thought the corrupted file would have some after effects like affecting other components?
@fluidfix
@fluidfix Ай бұрын
If you think about it then you will see that your point have roots but no fruit. If that would be the case then reflating bios, clearing comes and bios upgrades as well as downgrades would not have any point would they?! Given you make a 100% correct non corrupted copy i think that it should be fine to later just flash that copy back and revert to original. I'm just a fool and i can tell you what i would do but what you do is entirely up to you. Stay safe and happy.
@s.a3898
@s.a3898 Ай бұрын
@@fluidfix Thank you once again. You make a great point. It also puts into perspective why I've been hearing others make multiple copies of the backup bios, probably for this very reason.
@fluidfix
@fluidfix Ай бұрын
Precisely, when you do make a copy make few and compare and it would be good to remove the chip and solder it to the connector board and then read not through clips or others, i prefer this way as it is the safes to make sure the connections are all good.
@sloopycat1954
@sloopycat1954 Ай бұрын
Hi I have a Lenovo yoga 260 and need to remove or bypass the username & password. I also have a Lenovo IS3-IWL I need to remove the username & password and fingerprint security feature can you please help me thankyou great video.
@fluidfix
@fluidfix Ай бұрын
I wish i could but i never had them - stay safe and happy.
@sloopycat1954
@sloopycat1954 Ай бұрын
@fluid-fix I appreciate your kind reply, all the best.
@fluidfix
@fluidfix Ай бұрын
and vice versa
@AhavahFellowship
@AhavahFellowship Ай бұрын
Psalms 53:1 ​ The fool hath said in his heart, There is no God. Corrupt are they, and have done abominable iniquity: Those who seem Yahuwah are wise. Being a fool is down to personal choice.. respevtfully. Also I found a better way to around your solution the proper way is as it is done in a recording studio. You don't mute mix master you mute the individual track 'R S M ..UTE' . SO Arm the track and mute the track. Then record notice you can still monitor all other tracks to keep your timing but your v.o track is not echoing your voice. Mommy never made no fool but thanks for your tip it got me thinking in the right direction at least.
@fluidfix
@fluidfix Ай бұрын
I believe we are all fools as if we were not there would be no earth as there would be only haven. None would need to strive to live up to God expectations and Jesus would never had to dye for us. Spend few moments to think about it my friend from far away. By the way thank you for your tip i will look in to it. Be safe and happy God is with us all as we all are fools.
@AhavahFellowship
@AhavahFellowship Ай бұрын
brother you are no fool ...you were smarter than most to figure that one out . huge help !!! thank you so much for you time and effort sir Bless you in the name of Yahshua ha'mashiach
@fluidfix
@fluidfix Ай бұрын
Dare to differ. we are all fools just to blind to see. Stay safe and happy.
@jamespalmer5960
@jamespalmer5960 Ай бұрын
Thankyou for the consise information. with a little time and effort it work. t480 process is the same as the t480s but the bios chip i think is slighly diffrent
@fluidfix
@fluidfix Ай бұрын
Glad it helped and thank you for letting everyone know. Stay safe and happy.
@gokhan4845
@gokhan4845 Ай бұрын
what after all if I got stuck with "Entering Setup..." after pressing F1?
@fluidfix
@fluidfix Ай бұрын
Hi. If after f1 it is not asking for nothing and it is not as i show on the video something went wrong and you need to redo, or you one dose not support this method and it will not work. Stay safe and happy.
@satyamkumarpandey3537
@satyamkumarpandey3537 Ай бұрын
Your videos has just solved my biggest problem while doing voiceover so thanks a lot sir for your help. Love and greetings to you from India.
@fluidfix
@fluidfix Ай бұрын
You are most welcome Sir. Love and peace from Good as he gave you exactly what you need when you needed it my distant friend. Stay safe and happy.
@ttgeek
@ttgeek Ай бұрын
thanks. this helped me fix it, replacing the broken gears.
@fluidfix
@fluidfix Ай бұрын
Glad I could help
@tombstoneranch69
@tombstoneranch69 Ай бұрын
Watched 5 different videos, none of them even mentioned this. Your vid solved it quickly and easily. Thank you, thumbs way up!
@fluidfix
@fluidfix Ай бұрын
Thank you. Stay safe and happy.
@HalifaxComputersRepair
@HalifaxComputersRepair Ай бұрын
not really i cant even read any letters i use a camcorder does better job ......
@fluidfix
@fluidfix Ай бұрын
Well this is the way i recorded this and it looks good. Everyone has their own preferences. Stay safe and happy.
@DeathThemself
@DeathThemself Ай бұрын
you sir are my HERO
@fluidfix
@fluidfix Ай бұрын
Stay safe and happy.
@Nigelsyoutube
@Nigelsyoutube Ай бұрын
If you have birds eye set on your pro then motion detection will only be around 15 feet but if you turn it off you will get around 40 to 50 feet motion detection
@fluidfix
@fluidfix Ай бұрын
@@Nigelsyoutube that is great to know thank you for sharing it with us. I’m in Britain so I don’t have so much space to worry about in my midget home lol. Stay safe and happy.
@Nigelsyoutube
@Nigelsyoutube Ай бұрын
@@fluidfix no worries mate I to am in the UK so I feel your pain with the midget home mine being a one bedroom flat 😂
@fluidfix
@fluidfix Ай бұрын
@@Nigelsyoutube I just wish we all could have a piece of land that we call home free to build and live off it. I think every human deserves just that. If he allows it you and me one day will have just that. God love us all equally.
@Nigelsyoutube
@Nigelsyoutube Ай бұрын
@@fluidfix 🙏
@mohamedharoun2047
@mohamedharoun2047 2 ай бұрын
Thank you so much. I've tried multiple things but this is the only one that worked for me💗💗
@fluidfix
@fluidfix 2 ай бұрын
You're welcome! Thank you for shearing. Stay safe and happy.
@HalifaxComputersRepair
@HalifaxComputersRepair 2 ай бұрын
all that work , i might as well buy new motherboard to save me the hassle to do what you did lol
@fluidfix
@fluidfix 2 ай бұрын
hahah. that is one option, what i doo i do as therapy for my illness, What you need to do is what counts the most reasonable choice for you. Stay safe and happy.
@luke.hamilton
@luke.hamilton 2 ай бұрын
Thank you!!
@fluidfix
@fluidfix 2 ай бұрын
Thank you. Stay safe and happy.
@brownladKR
@brownladKR 2 ай бұрын
please upload a video like this for bios unlock for lenovo T14 gen 1 i5 10210u using CH341A programmer
@fluidfix
@fluidfix 2 ай бұрын
Hey there - i don't think it is possible yet to unlock it like that. Stay safe and happy.
@brownladKR
@brownladKR 2 ай бұрын
m.kzbin.info/www/bejne/h3S6kGWsaq55e5Y&pp=ygUcTGVub3ZvIHQxNCBnZW4gMSBiaW9zIHVubG9jaw%3D%3D
@fluidfix
@fluidfix 2 ай бұрын
hmm ...
@alejandragabrieladuran9772
@alejandragabrieladuran9772 2 ай бұрын
Thank You a lot! I bougth a 2nd hand T480 with SV Pass, i really need to reset all settings and turn off antithrief service. your video helped me a lot. gretings from Mexico Amigo
@fluidfix
@fluidfix 2 ай бұрын
Hi. My wife always wanted to go there. I hope you can fulfil your need. Stay safe and happy.
@aarohanp43
@aarohanp43 2 ай бұрын
Thank you so much for sharing, i have already ordered the programmer, i will try it and let you know. My x270 has been sitting for over a year now due to bios lock 😅
@aarohanp43
@aarohanp43 2 ай бұрын
One question it will work with ch341 programmer right ? I found its the easiest one without removing the bios chip
@fluidfix
@fluidfix 2 ай бұрын
Hey. I never did it with this programmer so i cant tell you but check if this is supporting that chip and if it is then you should be fine. Stay safe and happy.
@aarohanp43
@aarohanp43 2 ай бұрын
@@fluidfix thanks alot, i reset my bios successfully 😊. God bless you. 🙌🏼 you saved my old laptop from being dumped 😅
@fluidfix
@fluidfix 2 ай бұрын
@@aarohanp43 great! Have fun using it again. Stay safe and I feel blessed already. Lord gave you what you need when you needed it don’t overlook this miracle that many of us overlook daily. Be happy he love you.
@apmatrix2007
@apmatrix2007 19 күн бұрын
@@aarohanp43 Hi.. Did you do it without removing the bios chip with the CH341 programmer?
@jrd1811
@jrd1811 2 ай бұрын
Great video thank you! Do you also happen to know the type of charger cable? sadly i lost mine and can't find which type of micro usb it is
@fluidfix
@fluidfix 2 ай бұрын
Hey. Thank you . The cable is what you say micro usb that is the name of that connector. Stay safe and happy.
@fattyballaty3424
@fattyballaty3424 2 ай бұрын
Thank you for this detailed video. My port has just broken off, so this might help me to re-attach it.
@fluidfix
@fluidfix 2 ай бұрын
Nice little fluid fix for you. Stay safe and happy.
@R2B2YT
@R2B2YT 2 ай бұрын
Anyone know why I am getting a delay with my mic when I go to record...my voice is so slow, not real time.
@fluidfix
@fluidfix 2 ай бұрын
Hi The issue you're experiencing with a delay or latency when recording voice-over in DaVinci Resolve can be caused by several factors, including your system's audio settings, the buffer size, or potential software conflicts. Here are some steps you can take to troubleshoot and fix the issue: 1. Check Your Audio Buffer Size Buffer Size: A larger buffer size can introduce latency, causing your voice to be delayed. Try reducing the buffer size in your audio interface settings. Adjust in Resolve: Go to DaVinci Resolve > Preferences > System > Video and Audio I/O and adjust the buffer size or latency settings. 2. Ensure You Are Using the Correct Audio Driver ASIO Drivers: If you're on Windows, ensure you are using ASIO drivers, which provide low-latency audio performance. If you're using a Mac, the system usually handles this well, but you can still check for any software-specific settings. Set the Correct Input/Output: In Preferences, check that the correct input and output devices are selected under the Video and Audio I/O tab. 3. Reduce CPU Load Close Background Applications: Other applications running in the background might be consuming CPU resources, leading to higher latency. Close unnecessary applications. Lower Project Settings: Temporarily reduce the resolution and quality settings in your DaVinci Resolve project while recording your voice-over to lessen the CPU load. 4. Use Direct Monitoring (If Available) Direct Monitoring: If you are using an external audio interface, check if it supports direct monitoring. This allows you to hear your voice in real-time without the delay caused by the software processing. 5. Check Audio Hardware Compatibility Ensure that your microphone and any connected audio interfaces are compatible with DaVinci Resolve and that they are properly configured. Updating the firmware or drivers might help. 6. Update DaVinci Resolve If you are using an older version of DaVinci Resolve, consider updating to the latest version, as this might fix any known bugs related to audio latency. 7. Record Voice-Over Separately If the issue persists, consider recording the voice-over separately in dedicated audio recording software like Audacity or Adobe Audition, then import the audio file into DaVinci Resolve for syncing. After applying these steps, your voice recording in DaVinci Resolve should have reduced latency, making the process smoother and more real-time. If the issue continues, you may need to further troubleshoot your system’s audio configuration or consult Blackmagic Design support. Hope it helps you out stay safe and happy
@KAIGE47
@KAIGE47 2 ай бұрын
thank you, your a huge help when i needed it :)
@fluidfix
@fluidfix 2 ай бұрын
Glad I could help! Stay safe and happy.
@Mustafaghaybour
@Mustafaghaybour 2 ай бұрын
are this use with Lenovo just
@fluidfix
@fluidfix 2 ай бұрын
Hi. I think so. Stay safe and happy.
@Shourya-o6s
@Shourya-o6s 2 ай бұрын
hey man help me can you? i have an asus tuf gaming i5 12500H edition laptop and while playing with the settings i accidentally locked myself out by putting on an bios password... asus services say that i have to replace the motherboard but i am a college student and don't have that kind of money. i read something about cmos battery and backdoor passwords but i read that they were available in older laptops and the current one don't support these..... i would really appreaciate your help
@fluidfix
@fluidfix 2 ай бұрын
Hi every laptop manufacturer and model is different. I never did your laptop. I doubt that there is a solution to it available. The only suggestion i have is to research it but I'm not your saviour. Stay safe and happy.
@LibangF15
@LibangF15 2 ай бұрын
Thanks! I've never done this but it worked on the first try on my T570! I used Minipro TL866CS programmer.
@fluidfix
@fluidfix 2 ай бұрын
Nice work! Stay safe and happy.
@bishoymonier9997
@bishoymonier9997 2 ай бұрын
for me I turn it on then it tells me to restart after restart I get a blue screen then restart then blue screen do u know how to fix that 😞
@fluidfix
@fluidfix 2 ай бұрын
Hey there - blue screen might not be connected to this at all - you need to find out what causes blue screen in the first place and then you will be able to fix it , like for example gen 13 and 14 intel have manufacturing errors and that is giving blue screens. There is way to many options to assume is integrity issue. Research and find out. Stay safe and happy.
@ShanSuharban
@ShanSuharban 2 ай бұрын
Thanks a lot bro, you literally saved my next year. After i was connected my phone to the lap, the memory integrity is turned off. i researched a lot to fix the issue . Even i individually deleted all the files from system32/drivers , it will again appearing. I didnt understand it , idk it is a virus or not , idk im hacked or not .So i further reserached in youtube and didnt find the correct solution to the problem. Fun part is i searched for an year , not intensively .So after i searching again i accidentally get your video and it literally solved my problem. It permanently deleted the file and also deleted the old drivers that im really thankful to the work of driver store explorer and its teams .Im really greatful to you bro , it helps a lot of people time and energy. My doubt is this file really virus or harmful ?
@fluidfix
@fluidfix 2 ай бұрын
Hey. I'm glad i could help you. Be happy. Be not afraid. God give us everything exactly when we need it. Now talking about a files like that - technically many files that we all have on our laptops and pc are vulnerable and given that one possess knowledge they can exploit it - that is called hacking. There is no solution for that as anything that human thought of another human can break in to. Now that they are gone you have that extra layer of security on giving you peaceful mind. Stay safe and happy.
@DCDavid19
@DCDavid19 3 ай бұрын
EASY ty
@fluidfix
@fluidfix 3 ай бұрын
No problem, stay safe and happy.
@pandepragya30
@pandepragya30 3 ай бұрын
thank you
@fluidfix
@fluidfix 3 ай бұрын
My pleasure. Stay safe and happy.
@christianyambao9337
@christianyambao9337 3 ай бұрын
GENIUS!
@fluidfix
@fluidfix 3 ай бұрын
Just trying to help. Stay safe and happy.
@TheMrjogas
@TheMrjogas 3 ай бұрын
Hi T490?
@fluidfix
@fluidfix 3 ай бұрын
hey. Never had never tried. Stay safe and happy.
@Notchur.Architect
@Notchur.Architect 3 ай бұрын
This solution is not working for me :(
@fluidfix
@fluidfix 3 ай бұрын
Hi. This would mean that you have an hardware problem and not software issue. I would advise contacting them if on warranty or going to local repair centre. Stay safe and happy.
@frankgarvi
@frankgarvi 3 ай бұрын
Thanks a lot, you helped me fix it!
@fluidfix
@fluidfix 3 ай бұрын
Glad I could help! stay safe and happy.
@birdagapornis362
@birdagapornis362 3 ай бұрын
many thanks
@fluidfix
@fluidfix 3 ай бұрын
Happy to help. Stay safe and happy.
@Electricworld-1
@Electricworld-1 3 ай бұрын
🎉
@fluidfix
@fluidfix 3 ай бұрын
😉 Stay safe and happy.
@dfwbabydriver
@dfwbabydriver 3 ай бұрын
Thanks!
@fluidfix
@fluidfix 3 ай бұрын
thx.
@WendyWinchester
@WendyWinchester 4 ай бұрын
Thank you so much!
@fluidfix
@fluidfix 4 ай бұрын
Glad it helped!
@lanzritz3806
@lanzritz3806 4 ай бұрын
Omg non of these worked but I just accidentally pressed the turn off touchpad beside the power button 😂😂😂 but thanks btw
@fluidfix
@fluidfix 4 ай бұрын
Glad I could help by not helping lol. Stay safe and happy.
@JosePereira-gw2dc
@JosePereira-gw2dc 4 ай бұрын
Estou com o mesmo problema no meu Lenovo Thinkpad L440. Impossível entrar na Bios pra mudar a ordem de boot e formatar. Sou de Londrina,Paraná,Brasil.
@fluidfix
@fluidfix 4 ай бұрын
This would drive me crazy. Stay safe and happy.
@HoBrian
@HoBrian 4 ай бұрын
very details, I can follow step by step. Many thanks Bro
@fluidfix
@fluidfix 4 ай бұрын
Glad it helped stay safe and happy.