i have same problem with my dji mavic air please somebody help me
@yonggaotang22743 күн бұрын
维多利亚省?
@fsong002 күн бұрын
@@yonggaotang2274 bc是维多利亚省
@yonggaotang22742 күн бұрын
@@fsong00 把BC叫做维多利亚省似乎很不常见
@zhiqiangqin56045 күн бұрын
滑雪的技术很不错呀!
@fsong005 күн бұрын
@@zhiqiangqin5604 谢谢老友!
@اغربمقاطعفيالعالم8 күн бұрын
Thank you, but you have too many Thank you, but you have a lot of mistakes in explaining🥲This way to make my lens break down but thank you
@zhiqiangqin56049 күн бұрын
肯定当年的红军没有这4位红军那么欣赏这行军途中的美好风景。
@zhiqiangqin56049 күн бұрын
楼下,你说错了一点,是红军来了加拿大。
@brianlai438710 күн бұрын
Instead of drilling another two holes to secure the sides with screws, you could have used Loctite threadlocker on the existing screws that would have hold up with less effort. I'm thinking about getting this lens but by the looks of it I won't be paying more than 60$ for a used one or $45 for a unit affected with fungus given the effort it takes for me to open it up and clean/service the entire unit.
@fsong009 күн бұрын
@@brianlai4387 Thank you for your suggestion!
@williamyao990610 күн бұрын
多谢分享
@XanderBB3510 күн бұрын
你说得好像红军去了美国😂
@fsong0010 күн бұрын
@@XanderBB35 这位兄台很幽默
@01李秉潔16 күн бұрын
謝謝
@01李秉潔16 күн бұрын
謝謝您的解說
@jing-jingli572516 күн бұрын
你们好勇敢👍
@zhiqiangqin560417 күн бұрын
这么高的山上,还有那么多的小松鸡呀!
@zhiqiangqin560417 күн бұрын
就是爬山很难呀!
@zhiqiangqin560417 күн бұрын
雪景漂亮呀!
@zhiqiangqin560421 күн бұрын
Positano 小镇挺漂亮滴。
@Ildskalli21 күн бұрын
Thanks a lot for the video, it was very useful. If you're still making these, can you please edit them a bit slower? And also show some of the trickier parts a bit more. The clamps for the flex cables are of a type I hadn't encountered before, and seeing how to put them back in would've been great. Same goes for the zoom ring key, not something I had to reassemble before. Anyway, I did some maintenance on an old and battered 75-300mm III non-USM (it's almost the same lens, only thing that changes is the AF motor) and I messed up and tore the flex that connects the focus and zoom position encoders. Guess what? It still works, both on DSLR and mirrorless, and it's *sharper* now 🤯 (not because of the torn flex, of course, but just thanks to the general cleanup it got).
@fsong0019 күн бұрын
@Ildskalli So glad to hear your successful DIY story!
@haidharrasheed900023 күн бұрын
My manual focus ring is stuck
@岑曼麗23 күн бұрын
一點點是多少?
@ritacorvaglia971727 күн бұрын
Bellissima❤
@williamyao990628 күн бұрын
哇这样的呀!知道知道啦。感谢分享
@zhiqiangqin560428 күн бұрын
解说词挺不错滴。
@sandywong671528 күн бұрын
最好在零下5度时采摘 所有的营养都在!
@fsong0028 күн бұрын
谢谢,这还是第一次听说呢。
@herbys68Ай бұрын
Thank you for the video, it was extremely helpful. But after assembling the lens back, my zoom ring no longer works, i can turn the ring and the lens doesn't zoom in or out. I see that there is a metal L-shaped lever at the bottom of the lens that rotates with the zoom cylinder, and my suspicion is that this L is not being grabbed by the zoom ring as it turns. Am I missing a piece there? How does the zoom ring connect to the zoom lever?
@fsong00Ай бұрын
it must be an assembly issue. The L level should be embedded into the slot of the zoom ring. this way they connect.
@herbys68Ай бұрын
@fsong00 Ah, got it, it's working now, thanks!
@chuanjingwan8903Ай бұрын
好可爱,谢谢分享😊
@Yeh.110Ай бұрын
讚🎉
@zhiqiangqin5604Ай бұрын
这样的路,开车真不容易!
@TheShaquille1111Ай бұрын
Lake Braies真的很美,請問大哥這天早晨大概幾點到那邊的呢? 看起來沒什麼人,但看其他人影片都是人滿為患,感謝
@fsong00Ай бұрын
是的,需要早上,大概我们是7点到的。
@TheShaquille1111Ай бұрын
@fsong00 好的,到時候也要早點前往了,感謝資訊~🙏🙏
@zhiqiangqin5604Ай бұрын
挺厉害滴!秋天里下了大雪,还爬了这么险的山!
@zhiqiangqin5604Ай бұрын
无人机就是厉害!
@djsarojheyjamАй бұрын
Link to the product please?
@mexicofpvАй бұрын
Amazing video!!! Don't stop!!
@fsong00Ай бұрын
@@mexicofpv thank you!
@zhiqiangqin5604Ай бұрын
这次出现了两位大侠,表现出色呀!
@jessicaliu6371Ай бұрын
这么刺激呀!
@zhiqiangqin5604Ай бұрын
很勇敢呀!而且的确是解说很出色!
@fsong00Ай бұрын
谢谢老友!
@minzbonniezhao4453Ай бұрын
为勇士们大力鼓掌!颇有一番惊心动魄的感觉,解说得相当出色👍👍
@fsong00Ай бұрын
谢谢老友!
@shirleyloklok3217Ай бұрын
看了你的視频,我自己修好了一個家用小磨粉机,谢谢。
@wakkinitoАй бұрын
You shouldn’t use super glue, if you scratch the lens again and want to replace it you will have a hard time removing it it will not be able to remove it. You should use t7000 glue
@mariothechicken84132 ай бұрын
真漂亮
@zhiqiangqin56042 ай бұрын
爬山很英勇啊!
@johnsitu95692 ай бұрын
风景无敌,勇气可嘉
@lalengkima71962 ай бұрын
👍
@cugreen44392 ай бұрын
Thank you, bro. I did it but failed on a bad screw finally. I will try it soon with another new tool to open the bad screw.