Montane West

Пікірлер

@ripdiptatterchip3851 8 күн бұрын

Just replaced all my floor pans, never did it before but I bought a welder from harbor freight for $150 n an angle grinder and then bought the floor pans cut everything out hammered in the new ones and welded it in, I think I did all 4 floor pans for under $500

@montane_west 8 күн бұрын

That's dope, I can't wait till she's rust free

@f.chrisliuzzo7889 8 күн бұрын

Nothing a little sheet metal and rivets can’t fix

@montane_west 8 күн бұрын

100%

@f.chrisliuzzo7889 8 күн бұрын

@@montane_west rivets are stronger and don’t compromise the metals integrity.

@TheSilentOath 10 күн бұрын

Stay safe stay comfy!

@ericaannettewest566 17 күн бұрын

Alright now mountain man do your thing 😊

@brandonbyron7930 17 күн бұрын

😮😮😮

@ericaannettewest566 17 күн бұрын

Is this something that you’re looking into like is this truck for sale?😊

@christophercobb4317 22 күн бұрын

Give me to tell me you are post a video and not showing where you get the parts from say the truth to make it don't look too much of a difference from it being lifted

@edp9811 23 күн бұрын

How do you know how much to grind off?

@john_anders 25 күн бұрын

tax dollars hard at work

@countrycanadian44 27 күн бұрын

What gearing u got woth the 108 big bore and does it keep up to the chinese 125 and 140 pit bikes

@joses8168 29 күн бұрын

Thanks bro, helped my sons bike

@Foxtrot19 29 күн бұрын

how is it holding up 2 months later?

@dominicmassett4299 Ай бұрын

Start in the big pot with the meat brother( less dishes) add some onions, garlic and Italian seasoning to the meat while it’s cooking. Use a less fat percentage ground beef( not as much grease). And Cook the shells instead of those current noodles you’re using until al dente. My version of goulash. Only two pots used, and delicious.

@keller4200 Ай бұрын

That's not a full mod bike with a stock mod swinger... full mod would have a +4 mx style swinger

@montane_west Ай бұрын

This is a +2 I’m not sure it has to be +4 only, but I could be wrong 🤷🏿‍♂️

@nfarc7542 2 ай бұрын

What did you do to deal with the shock length? It looked like you just bolted the stockers back in...

@montane_west Ай бұрын

That’s exactly what I did 😅

@oldredcoonhound2182 2 ай бұрын

I know it is more expensive, but changing the leafs out for new ones could give you a 3" lift with factory type shackle. I bought an original 92 that I tried the pucks in the front. Didn't like them at all. Was walking around a wrecking yard (pick n pull) and spotted a wrecked xj with beefed up rear springs( the back end was totalled) So I took a chance and pulled the front coils and they were beefed up and gave me 3" in the front. I had replaced the rears from someone that had a new set from a spring shop.

@montane_west Ай бұрын

That’s a dope find, once I get some money together I’m gonna get a better lift setup 🤙🏿

@vietdaniel 2 ай бұрын

Hey bro do the Honda Crf50 need the transmission oil flush /changed ?

@montane_west Ай бұрын

Just regular motor oil change, like 1 quart

@sdbobbyt 3 ай бұрын

Looks good, did the same on my Xterra. 70 bucks fantastic.

@montane_west Ай бұрын

Thanks 💪🏿😁🤙🏿

@cumminscartel1825 3 ай бұрын

Does anyone know if this still works and i can just do it over the phone with a Ny adress?

@fawkingenius9369 3 ай бұрын

Does Nj follow the same guidelines?

@montane_west Ай бұрын

I would think so but I’m not 100% sure

@Olly328 3 ай бұрын

Will this work for the clear ktm tanks that go yellow/brown? After searching and searching I cant find a clear solution on how to clean them up. Also, you can't buy a standard replacement tank.

@montane_west Ай бұрын

I don’t see why not, I was told that this makes tanks brittle but I went down on her quite a few times and she is still holding up till this day.

@awdproducoes 3 ай бұрын

If someone's locking for buying cheap supermoto rims, it might help checking my Sacratus wheel sets !!! Full set, front 320mm brake disc, brake pump support for the big disc, rear brake disc, sprocket with 45t! You can customize, paint on rim, spokes colour, nipples, can print your name in it ! High quality, company working 11years, has professionals registered and trusted products, can always ask do check them out for inquiry..

@elkku2934 4 ай бұрын

How were the supermoto wheels?

@montane_west Ай бұрын

Amazing 🔥

@ericaannettewest566 4 ай бұрын

Yeah, you get that cooking stuff from your mom go ahead boy do your thing one thing I did teach you is how to clean and how to cook. Those are good qualities in a man.❤

@montane_west Ай бұрын

Thanks ❤️🙏🏿❤️

@boost1728 4 ай бұрын

“HoLy sHiT ShE PuLlS 🥴” Doesn’t show a single pull Stupid title, stupid vid. Click bait should be banned from the tube.

@juannuno3657 4 ай бұрын

You didn't showed how to install the pistons and rings into the motor. Wish you could of showed the actual rebuild

@montane_west Ай бұрын

Sorry about that 🙏🏿

@TroopThrowback 4 ай бұрын

Good talk through of the issues you discovered and how you plan to remedy. It’s always helpful as the family moto mechanic to see someone else brainstorm through the issues and describe in such detail the symptom and proposed fix. I’m no expert but am dedicated to always learning. Thanks for sharing! Happy trails!

@montane_west Ай бұрын

Thanks 🙏🏿

@nickandtoys4025 5 ай бұрын

I would have like to see you torque the piston rod caps. What was the torque specs on the rod caps?

@montane_west Ай бұрын

I no longer have the car or that motor, sorry 🙏🏿

@connorwilson8078 5 ай бұрын

Na bro just pour but oil in exhaust port and check to see if valve leaks, makes it easier to see

@montane_west Ай бұрын

Thanks

@carlgar2007 6 ай бұрын

junk

@jewolf5801 6 ай бұрын

Amazing video. I just purchased a brand new 2024 Honda CRF 110F and there is an issue, I am hoping you can help me with. The bike kicks pretty hard when shifting. When you shift from neutral to first it kicks a bit. When your shift from 1st to 2nd, it kicks pretty hard. When shifting from 2nd to 3rd and from 3rd to 4th, you don’t feel the click of the gear lever, but it doesn’t kick at all. And when downshifting, you could be going in 3rd or 4th gear and slowing down, and downshifting when almost coming to a stop, it kicks hard as well. I would appreciate any kind of help. Perhaps there is some kind of an adjustment I can do to eliminate or at least reduce this issue. Thanks so much.

@HorsepowerHeaven Ай бұрын

I hope you figured this out because I thought mine was messed up and after a few rides realized the shifter acts as a clutch when it’s depressed

@montane_west Ай бұрын

Sounds like the clutch setup needs to be adjusted

@alecvincent6392 7 ай бұрын

It’s called “self servo effect” 👌🏼

@LB-sk3vl 7 ай бұрын

Good job dad 👍

@Tay_2_raww 7 ай бұрын

Man it would have been so much of a helpful video if u actually tried to put the valves in

@f0x725 7 ай бұрын

I did this with a car bumper bar but it didnt last.

@montane_west Ай бұрын

Probably a different material 🤷🏿‍♂️

@Pitbikedawgsss 8 ай бұрын

Or any clue what size this bike is i have the exact same with a different swing arm

@montane_west Ай бұрын

It’s a 10 inch crf50

@Pitbikedawgsss 8 ай бұрын

Hey man any clue what year this bike is

@montane_west Ай бұрын

@corneliusmoss6106 8 ай бұрын

"Promo sm"

@DR61411 8 ай бұрын

Good vid but where's the follow up man 👍

@montane_west Ай бұрын

I got rid of the bike

@Matthew-wn8oq 8 ай бұрын

How did your rims and tires work out? Any good?

@montane_west Ай бұрын

They were great

@eprohoda 9 ай бұрын

Enjoyed!very unreal !Montane. 📽

@montane_west 9 ай бұрын

Thanks 😁🙏🏿

@adriangamerpro6612 9 ай бұрын

What tire is that in the rear?

@montane_west Ай бұрын

They are street tires and came in a set preinstalled on the wheels

@TheBingo1951 9 ай бұрын

lascia perdere !!!🥵

@schoonbeek2 9 ай бұрын

message incoming @ 5:30

@montane_west 9 ай бұрын

😁🙏🏿🫡

@oforilawson4010 9 ай бұрын

Please my valves and plug keeps damaging. What maybe the cause?

@jtgross2324 9 ай бұрын

Timing?

@jtgross2324 9 ай бұрын

Maybe base gasket is too thin, check squish

@montane_west 9 ай бұрын

Could be a few things, maybe the rod bearing is shot, valves out of clearance/off timing, be piston could be too tall... There's a bunch tbh. Find out the position of contact 🙏🏿