What in the 1990s is this? Why is this recommended to me?
@musicman478210 күн бұрын
@@Arbysroastbeefjuice that would be a question for youtube.
@ag63712 ай бұрын
Mack Pinnacle
@Best-Amphetamine4 ай бұрын
Holy fuck it 30 minutes long
@zacharybishop65958 ай бұрын
You should do no commentary driving videos, that MP8 sounds beautiful 😍
@al-mubdizahir87048 ай бұрын
how do i know if my meritor is synchronized? 2006 volvo vnm 10 speed
@musicman47828 ай бұрын
If you shift with the clutch and it is still able to grind it is not synchronized. In other words, if you have to time it perfectly to keep from grinding.
@zacharybishop6595 Жыл бұрын
Love the sound of that MP8 😍
@edwardtye4119 Жыл бұрын
Nice ringtone
@yamato97902 жыл бұрын
As Simple as that.
@dominickjillian63442 жыл бұрын
🤘 𝔭𝔯𝔬𝔪𝔬𝔰𝔪
@josephmullett46732 жыл бұрын
We used to just call that shifting the truck I guess the younger fellas call it floating gears there was no using a clutch or brakes the clutch was to start off to get it in gear the brakes were to hold the vehicle so it won't roll away or if somebody ran out in front of you
@POLYLIVING2 жыл бұрын
Auw I miss Loves. Thank u for this video. I’ve been unable to find a 🇨🇦 job as a new driver for a year now. I’m so discouraged. I messaged all the dealers out here today to ask for networking help. Come pick a rookie up from Newfoundland!🤓
@musicman47822 жыл бұрын
I was just in Ontario and Manitoba a couple of weeks ago on vacation. Absolutely beautiful there (Lake of the Woods). Good luck with finding a job. Persistence pays off! You'll find something soon!
@POLYLIVING2 жыл бұрын
@@musicman4782 I feel that. Thanks! Glad u enjoyed it here
@sokodad2 жыл бұрын
Had a car cut me off coming into road construction yesterday. Apparently all the signs previous weren’t enough warning. Have to get ahead of that truck so I can speed through the road construction.
@musicman47822 жыл бұрын
Usually how it goes. I'll never understand that.
@saimoniq.rtuinamata87612 жыл бұрын
When you change gear do you fully release the gas pedal?
@musicman47822 жыл бұрын
Yes. It's all about timing and getting it in the next gear at the right rpm. If you miss the gear, throttle up and try again.
@donaldtherocker17142 жыл бұрын
Damn auto spell cluch
@donaldtherocker17142 жыл бұрын
Great vid bro just 1 question do you use your couch for range shift
@outperformancelife31453 жыл бұрын
Hey question when are you going to video your day as a truck driver?
@bamitt13 жыл бұрын
What gear do you usually start in? Just push the clutch for 1st and reverse?
@musicman47823 жыл бұрын
If I'm loaded, 1st or 2nd. Empty is 3rd or 4th. And yes only use the clutch when stopped.
@danieloconnell63063 жыл бұрын
That is engine #104
@danieloconnell63063 жыл бұрын
104 approaching kenific
@danieloconnell63064 жыл бұрын
Brandon Carlson is working on train 104
@danieloconnell63064 жыл бұрын
The train does pass through the Asian highlands and behind the African grasslands and the union Pacific engine house is where the 119 and 104 is stored every night and morning
@danieloconnell63064 жыл бұрын
Passing through the Asian highlands
@danieloconnell63064 жыл бұрын
Is this the Dallas fort worth zoo do you guys want to come to the omaha zoo to ride train 119
@musicman47824 жыл бұрын
It's Henry Doorly Zoo. We have a membership there, and I used to work there back in the late 90's.
@danieloconnell63064 жыл бұрын
104 is arriving at omaha depot 119 is arriving at kenific
@danieloconnell63064 жыл бұрын
You can our other engine 104
@danieloconnell63064 жыл бұрын
We have 2 steam engines on the omaha zoo railroad trains 104 and 119
@GoBuckeyes2164 жыл бұрын
I had a 2016 Mack anthem day cab and the turn radius on that thing was insane! It drove pretty good otherwise but making turns in a tight city area was a complete nightmare
@musicman47824 жыл бұрын
That can be adjusted. Takes about 30 minutes at the shop to fix.
@youbastrds2315 жыл бұрын
It looks simple enough. I have an automatic transmission only thanks to cr England but the company I want to apply for only has ten speeds. At what rpm do you start to shift? And what about downshifting?
@musicman47825 жыл бұрын
Usually with a 10 speed, I feel my way through the first few gears. I only use 1st on a grade. Easy way to remember is 15 mph 1+5=6th gear, 25 mph 2+5=7th gear, etc... in the Mack with the MP8 motor, I usually take the RPMs to 1600 then shift. It should fall in the next gear around 1400.
@Dee123272 жыл бұрын
@@musicman4782 i drive international with the beautiful maxxforce lol, its a 10 speed as well, I usually shift empty or light around 16/16.5 and loaded around 17. All engines shift different though.
@troyoga9225 жыл бұрын
Counting the gears really shows it's nothing the one time that you mentioned the speed you were going in the gear was slightly helpful if you would have continued to mention the speed and the gear that would have been helpful would have also been helpful if you would have told us if you down shifted from say V the first when you came to a stop and how you do that you rather get up and go into a lower gear rev it up again and going to a lower gear or did you just come to a stop in 5th gear switch the range selector and go to First and explain what you're doing
@musicman47825 жыл бұрын
25 mph: 2+5=7th gear. 35 mph 3+5=8th gear etc... put slight pressure on the shifter before you let go of the throttle and it will come right out of gear when you release the throttle. hope this helps!
@EDDIEHAUL5 жыл бұрын
Just added you here man, nice video
@Kenny_K23235 жыл бұрын
DAMN that show was a BLAST!
@AryanDiablo5 жыл бұрын
Nice rig
@Grtruckingdemolitionllc5 жыл бұрын
Very nice video man what are you using to record a go pro with a head mount ?
@musicman47825 жыл бұрын
Yes. It's the GoPro Hero 5 Session (maybe 6, I can't remember for sure) on a head mount with a microphone attached.
@jefferymanuel42265 жыл бұрын
I have that same ringtone on my phone😂😂😂😂😂
@lazy-13525 жыл бұрын
As it is not rationally used a place in the sleeper. Not thought out.
@haulinclass74785 жыл бұрын
Gay autos
@danielsalmon39095 жыл бұрын
We got a anthem daycab where I work at darpro
@moth4505 жыл бұрын
I want one.
@toyotanerd22695 жыл бұрын
I drove a tow truck with one of these 10 speed first time. Clutch or no clutch you still have to match speeds . Clutch dose no good
@toyotanerd22695 жыл бұрын
That's what I never grassped when watching videos about unsycronize trans. I thought you could be safe from grinding when double clutching. It's nothing like a car.
@HaitiantruckerRony5 жыл бұрын
kzbin.info/www/bejne/rWGnqqhsrNWBqNk this me shifting a 10 speed using no clutch
@airbornegomez5 жыл бұрын
Get some, big dog!!!!!!
@chadmock58835 жыл бұрын
Very nice. Admittedly I’ve always liked the Peterbilt. But as a driver I’d choose this. Very useful space. Nice looking trucks. Visibility out the windshield and over the hood looks outstanding. I’m sold on these. I’ve heard no complaints.
@Vdubkillertodd5 жыл бұрын
Very nice truck! The owner of my company just let me spec out a 2020 Mack Anthem, I take delivery of it in late June or early July. Is there anything that you found that you don't like about your truck?
@musicman47825 жыл бұрын
Not much really. The Lane assist gets a bit annoying, but it's not as bad as I thought it would be. I hope you enjoy it as much as I enjoy mine!
@michaeldwyer50425 жыл бұрын
Can u shift from from 5th to 7th
@musicman47825 жыл бұрын
Yes. If the load is light enough, or you are bobtail, you can skip shift.
@631strongislandkid6 жыл бұрын
Is there a camera on your head?
@luisbarrios44303 жыл бұрын
No
@thedinohd61496 жыл бұрын
Buen vídeo,sigue subiendo.
@Gamerboy-gy1rl6 жыл бұрын
*Nice great vid keep up the povs*
@chasedragoo72336 жыл бұрын
Fellow Nebraskan👋🏽
@danieloconnell63066 жыл бұрын
That is engine 104
@wimnieuwdorp53376 жыл бұрын
nice video men (more videos)
@bradfinley19057 жыл бұрын
I'll look forward to it been outta the game 8 years just getting back into past couple months this helps alot thanks