No. 30 year journeyman carpenter (mostly framing) and contractor. If you're a journeyman carpenter or a structural engineer familiar with residential building, they're called a "conventional ridge" (which before the late 1950s weren't even required) or a "structural ridge". Why do you post this bullshit?
@williamsouza33868 күн бұрын
So as an engineer I would love to ask you a question I've dismantled houses that are 300 plus years old the ridge was nothing more then a piece of ledger board made it through the hurricane of 38 in New England had no engineered Lumber that you're talking about way more snow than we've had in New England in the last 30 years not one of them ever ever fell down can you explain that
@kenny65317 күн бұрын
I thought they're called tie beam and collar beam.
@quebecome21 күн бұрын
The 2 main structural elements of a house are substructure and the superstructure, and this includes the foundation, columns, beams, and roofing. The integrity of a structure depends on them.
@bikersoncallАй бұрын
Lost me right in the beginning, not simply identifying, by showing what a ridge board is and what a ridge beam is. Edit: 5 mins later after looking it up; A ridge board is non structural and apparently acceptable for pitches/slopes greater than 3/12, whereas the Ridge Beam is 'structural' and usually or perhaps typically supported by columns.
@marcothehammer2 ай бұрын
THIS... is my kind of video!
@marknovetske47382 ай бұрын
Great talk 😊
@Davidm10562 ай бұрын
Waste!
@ubermenschen36362 ай бұрын
It would nice if you identify the ridge beam and ridge board on the model immediately.
@ptech882 ай бұрын
Nice i want to see a framer do this in 30 seconds.
@DIZZAAY3 ай бұрын
Wow this is the best demonstration of this concept I've ever seen, thank you! Great model
@poliniofficial3 ай бұрын
Yeah science!
@taguelumber3 ай бұрын
👏👏👏
@RichardSchlaud3 ай бұрын
Fire your producer
@joshualawn87213 ай бұрын
West coast logging is way cooler.
@yourmasterrenovator863 ай бұрын
Thanks a lot 🙏
@lonnieclemens80283 ай бұрын
Thank you for sharing this video. It is good to know about structural integrity and how to build walls etc...
@bryanp80104 ай бұрын
You still never actually explained the difference between the two words
@CoreyGerald-hs1um4 ай бұрын
Good content ever seen on youtube
@briangilley50934 ай бұрын
That was Cool! Ty
@MikeWhoo-gy5jq4 ай бұрын
Weyerhaeuser is a trash company Oregonians can’t stand them illegally holding land that was never intended for them
@ProspectorAl4 ай бұрын
I love the model. This is so hard to explain to people without the visual aide.
@michaelbrock46594 ай бұрын
Don't forget about enough room in rafters for insulation and venting? Especially in cold climate like Canada,
@Greyskydies4 ай бұрын
Are you still a territory manager? How do you like/liked that job? I’m trying to get that job here in the NW and find your videos very informative!
@johncostelloe7435 ай бұрын
Watching in Ireland great presentation thank you very easy to understand
@braedenbrown66915 ай бұрын
Great Explanation Of Strong Roof Building! Thanks, A Lot⭐️⭐️⭐️⭐️⭐️🏌🏾♂️
@AfricanSouthernCross5 ай бұрын
What about the two gable ends that also support the ridge beam and roof, where is that ? I’m sorry but structurally this is not correct.
@dirtrider-zr9ng5 ай бұрын
Hey folks carpenter here dont trust companies that make parts. Every stick cut roof should have double 2×12 member to attach rafters to. Or its junk.
@chaselyons316 ай бұрын
Yhis just answered questions I’ve had for a month now that have been stalling me from progressing my shed build. I now have the confidence to start working on the ridge and rafters. Thanks for the video
@amac3336 ай бұрын
This is the best explanation for this type of conversion I found on KZbin. Thanks.
@michaeljosephdick3 ай бұрын
😢 Y
@hippo-potamus7 ай бұрын
But even with the compression roof the gable ends would have braces all along the edge if not for support at least to provide a board to attach the sheathing and thus provide the same load transfer down to the foundation. Right?
@c.j.roberts6897 ай бұрын
Very informative!😀
@geraldsteeves2837 ай бұрын
Does the same thing need to be done on the opposite side
@scenicnomad87444 ай бұрын
I was wondering the exact same thing. Did you ever get an answer on this?
@deadfd3 ай бұрын
@@scenicnomad8744 If you click on the actual technical bulletin in the description, it says "Repair may be installed on either side of TJI Joist". So only one side is necessary.
@scenicnomad87443 ай бұрын
Thanks for that! I'm on a mobile device and for whatever reason, it won't let me open that link in the description.
@Luckingsworth7 ай бұрын
Only real explanation I have been able to find. Thank you. I guess that vaulted ceiling conversion wont be as easy as I was hoping.
@j100018 ай бұрын
One of the best videos I’ve ever seen on this topic! Thank you
@duanemckitterick34509 ай бұрын
When using an I Joist as a rim board, do you fill the web portion with any material to make it look flat?
@mrsentinel49119 ай бұрын
I love the model. Such a great thing to take the time to do for demonstration.
@oldschool67989 ай бұрын
Very good explanation, thank you.….not sure about the need for hand and eye protection for this video.🤷♂️
@chippysteve45249 ай бұрын
Thankyou for an excellent visual explanation.
@ramunasvalancius54559 ай бұрын
gloves ant goggles Why😂🤣🤯. I would lave to know, in what danger you think you are😀🧐
@nathanbennett90259 ай бұрын
How come on houses that have a ridge beam why do they only put collar ties every other rafter why not every rafter I want to put collar ties on every rafter in my house
@uncle_creepy274310 ай бұрын
ha... thats a joke right?
@christopherdekonstrukt44410 ай бұрын
Can these be used in place of headers? I have a termite eaten 8 1/2' 4 x 12 garage door header that needs to be replaced. The I-beam would allow for insulation.
@devamarketer10 ай бұрын
Do the holes support weight? Can i suspend something through them?
@antoniiocaluso107110 ай бұрын
why aren't LVL, or such, made...hollow? As much as possible, anyway. Without significantly reducing its capacity. Less material...less-weight...less-waste...good for the planet...blah, blah, blah :-) I'm an old framer (aka: designer/builder), who'd appreciates more "lightness" as a spec., too. btw, my all-wood structures have been in 8 hurricanes in S.FL, since H. David, with NO damage. Even those with Trus-Joists ('81) ! )))
@MrLgmurphysr10 ай бұрын
You are full of you know what. Any 2nd year carpenter would destroy you in a debate. Your lobbying may get the rules changed so you can force feed more overpriced materials on the unknowing public, but it doesn't change the math or the evidence data. Shame on you.
@techheck33589 ай бұрын
What isn’t true about what he said? 😂 it’s basic physics
@pawekosinski967110 ай бұрын
Larry looks like Sean Bean ;)
@pawekosinski967110 ай бұрын
Are filler block added to second joist or it's empty there, or filler block has to be 1 for 2 joists and thick enough to fit the gap between joists?