Be careful here. We went in April of 23, water wasn't right and it was pretty extreme.

Get a neoprene tank cover if you run it below freezing in the winter. Or you’ll need to have methanol injected into the tank to prevent freeze ups in intake. Just a heads up

Yes yuuu do all motor e es need bresk in piriid

Thanks for this , I will put in at 6:30 am at sunrise on my jet boat and work this.

All he sees is a red image of heat thermaled meat .........It wants you !

I've caught some slab Crappie at Paradise. Excellent fishing and I love how they manage the place

This thing was IMPOSSIBLE to set up on a just slightly windy beach!

How do you control the brightness?

Portages are for p*****s

the boats were built in the carpet mill of my hometown winder ga. once the carpet mill shut down river hawk went out of state and i believe shut down not long after

Just ordered one of these, can’t wait to try it out. Keep us updated. I know you need to break it in for 2-10 hours when are you supposed to change the oil for first time?

Loved this! Thank you! Mrs. B

For trout, you'll be better off fishing the north side of the bay. That's where we've had the best luck. Especially if you fish from a kayak.

How much this price

She's alright She's alright She's alright ...................Propane.

Very interesting, haven’t seen any propane motors in person

Garbage - link unavailable

Competencia… será destruida

Hey my gas has lost all images of land sand banks and water but still shows a trail of where I've been can you help me restore this thanks

wonder if you can use it like a sail for you kayak. lol

Hello, that was the only problem you faced? Striker was ok ?

Fixed mine! Thank you.

Nice😊

Interesting video. We pull a nucamp t@b 400 BDL and here is our setup. First thing we did was replace the spare with a full size spare to match the road wheels. We also ditched the steel rim and bought a matching aluminum wheel. Then moved the spare from under the trailer to the top of the fork. In our jack bag is a 1-ton bottle neck jack, extended jack handle, a Dewalt Impact Wrench with a small wheel lug nut kit. This small kit has six lug nut sockets that fit either our tow vehicle or the t@b. I also carry a small allen head screw driver to remove the screws on the fender well covers. Have two heavy rubber stabilizer foot prints similar to the lego models and I would use those to support the jack. I wanted a system where I could jack up and change a flat, along side the highway, at night, in a rain storm. It should be noted that you can keep your camper connected to your tow vehicle for safety. I would also chock the good side tire but would avoid lowering the stabilizers on the flat side (if I did it would be after I had jacked up the camper) unless I needed extra stabilization. Oh, wanted to add we did purchase a manual lug nut wrench in the event we had an issue with our impact wrench. You are not the first nucamp owner to discover the size of the lug nuts are not standard to a vehicle. You may also mention most nucamp campers have a smaller spare tire normally mounted on a steel rim. The idea is to provide you a spare to just get you to a tire dealership. This all came to light for us when we started looking for new tires and discovered from the forums, the tires on our 2019 were from China, were known to have issues, and were impossible to get unless you ordered from nucamp. What this would have meant is if we got a flat, we would have had to purchase two new tires if the flat couldn't be fixed. Strongly recommend installing TMS on those camper tires.

It worked! Thanks

Ty

This is by far the best vid I've seen in a long time. The 360 view is simply amazing!!! Big thumbs up!!!

Dammit. I’ve been fishing there since the late 1950s and now you have to go and tell others. Wakulla: there was a time when all we would have to say would be “pronounce with short u.”

How long of a float was this?

What battery is recommended for this unit.

People can generally figure out how to run a hot water faucet. Those are usually in plain sight. Please show the stuff that is hidden away and that carries all the do-it-right-or-you'll-die warnings in the manuals.

if you wanted to just peddle one day could you still use the rudder without the motor attached? Or would there be open wire ends and such?

Gotta shut things like this down as quickly as possible. Thank you for bringing this to our attention. Love a good watch dog for our environment and way of life.

Show us more than just a van please.

There is a lot of grass from Morgan Falls to Johnson Ferry and I found it tough to fish. Is there a trick?

You say ‘I refilled the Alde’ but you didn’t say how. I am having difficulty finding out how to fill the alde hot water tank. Any ideas for me?

What length paddle do you like on the 120? I'm 6' tall.

Good job. Any observations on spare tire removal and re install

THANKS for the video QUESTION Are the cameras Wifi. To be able to watch live on a mobile phone while the camera is in the water. Water wolf ? WESTIN ESCAPE ? I am waiting for your answer and soon another camera will come to my hobby. Happy Catching.

Have you fished the area recently ? I had zero luck there the past few times

Have you ever put in north east f this. There looks to be several good put ins north of this tied into a creek or so.

Lost a $400 shimano setup off my bass boat this past week. Took off and forgot to strap it down and it bounced off. Just put together a new $500 combo and definitely getting one now! Thank you for the video and info

I primarily fish moving water so I’m trying to figure out if this is the best bait for me in this price range. Thanks for the video!

That’s the panfish portrait not the panfish pro.

Thanks for this. You answered the one question I had about this unit :)

The plus button let's you zoom in also

I got the 2018 130 and like it very much! I installed a trolling motor to mine.

Solid. Many thanks.

Do you any details on how I can put together a bait tank like yours? thanks