THANK YOU ! I literally just did it few minutes ago. '03 CHevy tahoe here. I start watching your video then stop around @4:35 and went on my parking lot to swap it. Feed back from my experience : I did not remove the speaker. Just peel the plastic sheet from the uper left corner. You'll have easy access. Gotta do that because I'm in France and we don't have easy access to imperial tools therefore removing the speaker was a no-go for me. Took me 15 minutes for the whole process Fun Fact : I bought my part from Rockauto because it specifically said "rear door" but the one I got was labelled "front door". I frowned but, they are, in fact, identical. The hardest part for me was to put the door trim back. There is a kinda cardboard down the inside of the trim that was hard to put back in place as you have to make the hole for the 7mm screw aligned. I managed to get that one screw back but was not able to put the screw hidden by the built in armrest back into position. IMPORTANT NOTICE. My door stop was working perfectly... to stop/hold the door. So why did I need to replace him anyway ? Well that door stop also work as an switch for the PCM to know when all doors are closed or not by being grounded (or the oposite i can't remember) when the door is closed. For a few weeks I had that display showing "rear passenger door open" each time I put in Drive. Which was a lie. It also forbid the car to lock the door when you're driving. That is a safety measure to get this fixed. It can either be a faulty PCM or a faulty Door Stopper. How to proceed to determine who's at fault ? Crawl under the steering column and you'll find a black plastic box with many plugs. Near the firewall you'll find a big purple plug facing down. Unplug it. Start your vehicule and go to Drive. If the message is still displayed it means the PCM is not faulty (as you just unplugged it). Plug it back and replace your door stopper. If the message does not appears when the PCM is unplugged means you'll have to replace it. Have a nice Sunday !

Wht do I hurt after that

Time for an updated video… 8 years later!!! LOL

Damn only half of mine is ripped of this made it feel like nothing nice job dude for getting throught that

Thanks! The video showed enough information to troubleshoot why my tag switch wasn't working

Did it ever grow back tho. I am going thru a similar situation and worrying.

Homie you breathing a lil hard under the car . But all good work

U got me about to pull my shit off man I can’t be no bitch if u did it I can

What is the code to the nuclear missile silo!???? (Terrorist interrogations)

My 05 GMC Sierra has had one missing since it was bought time to get this replaced. Thank you for this video!

Yo. How did that nail grow back

2:19 wtf dude he’s just trying to record a video of him ripping off his nail.

Smashed my Index finger in my truck door last week. Feeling your pain right now

We not gonna talk abt at 2:20 the middle finger-

Excellent video thanks !! Just bought a 2002 that needs one replaced

Smashed my ring finger with a sledge hammer.. currently going through your pain dude. 😂😂

This was caused by cold solder joints on the speedometer circuit board. Reflowed the solder and it's fixed now. 1995 Civic DX hatchback, 1.5L sohc

I'm going through this right now. Still 30% attached to the nail bed. Not going to try to pull it off like you are. Waiting for it to finish passing beyond the cuticle, then trimming of the 70% that is flopping around. Thanks for torturing g yourself so I don't have to think about that route any more.

Not that much beer in the fridge...js

How in the world did you get under there? I was trying to change the resistor out this morning, but found it impossible to get to it after taking out the side panel. Does it need to be on a rack for us big guys to be able to fit there?

Don’t do that it’ll come off on it’s own, another nail starts to grow under it, leave it for a week or two and it will come off while your doing something you won’t even realise.

I felt the pain too

Two months ago stubed my toe agains the door so hard that nail almost came off on it's own, and I had to remove it later on. I feel you..

Gracias por el video, te pasaste

Seeing you do that gave me the resolve to do the same to my bloody nail! only DUDES would say "that freakin hurt" with a big smile on their face 😂

I slammed my thumb in a metal door and it is COMPLETELY black, purple, and red-

Mine is hanging off a thread. I don’t have the balls to remove it. Everyone is calling it the witch nail 🧙‍♀️

My thumb nail was smashed in a 10 ft tall door

Thanks for the video.

Jesus Christ luvs us all ❤️

This seems to be a common problem on this model and Kia's in general. Other than that I love our Kias.

Thanks for the video! Extremely helpful! When I realized it was the resistor, I hit up Auto Zone and they had two sources for the new part. $50 and $70. I looked on eBay and found a part direct from Haundai (aka KIA) for $17. Got the part in a week and installed it today with help from your video. Works like new! Gotta love KZbin! Very helpful, especially all the little tricks you showed. Good work.

How did you know it was the resistor & not the motor blower?

My AC just went out. But the blower doesn’t turn on at all

I should've shown it first, but I show how the trim panels remove toward the end of the video. Thanks for watching!

🖕😁

This happened to me and remove my thumbnail not even hurt

Why I'm holding my breath?

i smashed my finger in a door about 3 weeks ago and im only 12 i hope it doesnt hurt to come off but at least it doesnt have pressure with blood and is already halfway detatched from the base judging by the white area so i hope im fine

did it grow back normally?

OMFG.. Read your darkside piece and had to come here.. why?.. No idea but,.. that hurt to watch. Hope all is better.

Ive got one with 2 bros high mount exhaust

get adrenaline rush just watching this ;p

I wish that my ride home was that nice. Nice vid.

wow, nice honda...a local used place has one just like this for 2899...good price?

Thanks! I'm runnin jardine high mounts... Yours sounds pretty interesting, I'm lookin forward to that vid!

nice sound, stock exhuast or what are you running? and thanks for the comment you should see and hear my bike now i painted the entire thing frame engine and all.. and i created my own exhuast some people say its too loud but i say whats too loud? haha but when i can i will post a walk around video of it, see what you think, i think its an improvement haha well good riding

the superhawk has whats known as a half fairing... to get the "fatter" look u just need a full lower fairing... ill admit i do like the looks of a full fairing but the superhawk has a very unique look...

...as any biker would tell you there is nothing more valuable than experience. For a beginner the superhawk is a probably a little too much bike... but that aside, i would just say be extra careful until you are very comfortable with your bike and your riding ability... try to wear all gear all the time... and be very cautious as cars love to pull out in front of bikes... ride safe, and good luck, but most of all have fun!

pretty cool man