Thank you so much for your feedback! 😊

Piece…not…peace😂

You can find all tools and materials in our onlineshop silberladen.at Unfortunately we only ship EU wide.

Thank you very much!

Yes, it is possible to slightly moisten the piece and smooth it out with your finger. Once it has dried again, we recommend sanding the area with fine sandpaper for a smooth finish.

Goldie Bronze typically uses an organic, non-toxic binder made from plant-based cellulose or similar materials. These binders burn off completely during the firing process, leaving only the metal behind. However, the exact composition of the binder may vary depending on the manufacturer. If you have allergies to certain chemical compounds, it’s best to contact the manufacturer directly to confirm the specific binder used in their formula. This will help ensure it’s safe for you to work with.

Thank you for your feedback! 🥰

Thank you for your feedback. Unfortunately, it’s possible that you left too much of a gap with the Post-its or that the ring band was placed too loosely. Something might have also gone wrong during the firing process. There could be many reasons for this. Depending on the condition of the ring, you could try soldering the pieces together. Best wishes and all the best!

This accelerates the reaction rate.

Thank you so much for your kind feedback! This is a common method for setting a pearl.

Yes, the sanding dust or the scraped-off Metal Clay particles can, for example, be mixed with (distilled) water to create a paste, which can then be used to join or repair parts.

Thank you so much for your reply. I wanna try it but I'm afraid because i don't have any experience. Is there any other material similar to this to experiment before i buy silver clay?

@ You can try Goldie Clays, which come in forms like iron, copper, bronze, brass, etc. However, you'll need a kiln for them, but they behave similarly to silver clay.

@@metalclay-silberladen-at Thank you so much 🙏. I wish you the best 💓

Yes it is :)

Of course it is fine silver 999. 😊

@@metalclay-silberladen-at Thank you for your quick reply! Yeah it might was a silly question lol

Thank you for your feedback! We try to improve our service in the future. Greetings 😊

Da Schmuckstück soll leicht glühen. Verdunkle dafür den Raum. Einfach mit kreisenden Bewegungen feuern. Nach etwa 4 Minuten ist dein Schmuckstück ausreichend gesintert. 😊

Thank you! 😊

Thank you for your feedback! 😊

We're glad to hear that! After firing, we use coarse sandpaper and progressively move to finer grits. We start with about 120 grit and work our way up to finer ones (2000+ grit). To patina the copper, we use Baldwin's Patina. Greetings!🙂

We recommend Art Clay Silver

Thank you! 😊

Thank you!

Thank you! 😊

Thank you for your feedback 😊

Thank you!

Thank you for your feedback! 😊

About 4 minutes 😊

You can find all products shown in our onlineshop Silberladen.at 😊 We wish you the best for your journey!

​@@metalclay-silberladen-at do you deliver through all Europe?

Thank you very much! 😊

Thank you so much for your feedback! 😊 Essentially, the width and thickness of the inner ring are entirely up to you. We like to use a thickness between 0.5 and 0.8 mm, so your silver sheet should work perfectly! Have fun crafting! ❤

Vielen Dank für dein Feedback!☺

Thank you for your feedback! 😊 The long firing time ensures that the piece sinters properly, achieving maximum stability and strength. Metal clay shrinks during firing, and that's where the paper strips come in. They act as a kind of buffer, preventing the metal clay from cracking due to the significant tension that would otherwise build up. ✨

Thank you very much for your feedback! Yes, the paper simply burns away. It ensures that the metal clay doesn't crack during firing, as otherwise, too much tension would build up. You should expect a shrinkage of about 8-10% with Art Clay. Best regards!

Unfortunately we do not ship to USA yet 🥲

Thank you! 😊

Thank you very much

Thank you for your feedback. Unfortunately, the selected music may not appeal to everyone. Therefore, the videos are designed in a way that they can be enjoyed without sound.

Danke für dein Feedback Christoph! Wir werden uns bemühen die nächsten Videos noch besser zu machen 😊 Liebe Grüße

Thank you very much!

Thank you!

It is called hot pot. But unfortunately it is sold out.

Thank you! So that there’s a flat surface for the ear post. Otherwise, the earrings would hang crooked on the ear.

It is bronzepowder with a binder.

@@metalclay-silberladen-at is it available on your store?

@@metalclay-silberladen-at please can you give me the link to buy the binder? I can't find it on the store

It is already premixed in the package. You can find it here: www.silberladen.at/metal-clay/goldie-clay/bronze/