Works. And they use wooden block to rest ships on, so I think you'll be fine!!
@steveallen26104 күн бұрын
"1oz for every 4" gals is the same thing as "2oz for every 8 gals"
@bassmonk29205 күн бұрын
Needs insulation and lithium...better cushions...12 volt AC and get rid of the TV....I would pay more for that!
@BrunoTombari5 күн бұрын
If you were able to add the extras you would then be in the price range of a more feature packed unit. The Comet is meant to offer a budget friendly RV with all the features you need to enjoy camping. Thanks for the feedback and for watching
@BigBeastin087 күн бұрын
Hello! Very helpful video. I noticed there is no HMI on top of there air filter. Where is the HMI on your model truck?
@BrunoTombari5 күн бұрын
does not have one.
@kurtmiller225412 күн бұрын
How much weight will they hold ?
@funone871610 күн бұрын
34,678 pounds each
@BrunoTombari8 күн бұрын
I am not sure as boards are rated for linear weight for building frames and not rated for flat load. I can tell you they support my 3500 pickup without issue and I have used similar ramps just using 2x12's to support motorhomes which are much higher loads. If you are using heavy vehicles it will be trial and error with caution. Thanks for watching.
@ReginaCreates216 күн бұрын
Thank you 👍 I don’t see the link for the kit
@BrunoTombari13 күн бұрын
Sorry about that here it is amzn.to/407TL32 Thanks for watching
@BrunoTombari13 күн бұрын
If you are in the USA, I have added the Amazon.com link to the video description. Thanks
@ReginaCreates213 күн бұрын
@@BrunoTombari thank you!
@Alen1000Pro18 күн бұрын
USA needs got get rid of those ultra mega ugly yellow reflectors on the headlights. Literally destroys every car look
@Flyingfrogs2y22 күн бұрын
I love the Axis types. But we all know that shower curtain is going to stick to you when in use. I think these corner showers are Thor’s downfall. Great video partner 🤠
@quando341124 күн бұрын
Wider is the better, I would go 2 x 12 Thanks for the great video.
@rzugalarz215027 күн бұрын
Great video , please can I use it for a washer pump 2900psi 4gpm thx
@BrunoTombari25 күн бұрын
I believe you can if you get the 3,100 PSI or higher hose.
@rzugalarz215024 күн бұрын
@@BrunoTombarithe reduced section of the hose 6,35 mm will not have a bad impact on the pump?
@michaelsmith9308Ай бұрын
does this have led headlights?
@BrunoTombari25 күн бұрын
I'm sorry I am not sure as I was not given that information at filming, however if you check there website it should give you that information. Thanks for watching.
@craigrogers3235Ай бұрын
Pro tip, if you have a 7/32 socket don't go out and get a 5.5mm.
@wale6582Ай бұрын
Nice video. Very informative. Why can't I use it to wash my sidings and drive way. Won't it do the job?
@BrunoTombari25 күн бұрын
It will do the job depending how dirty it is and which nozzle you use. Remember this washer provides more GPM or flow rate rather than high pressure. Driveways and siding if really dirty usually need higher pressure washer with a lower flow rate.
@vincealoise8216Ай бұрын
Did anyone actually test the pressure?I recently got one from CT on sale at 229,however I connected a pressure gauge and it's far from the pressure they advertise it at...seems 1800 is peak pressure,which I only get when you release the gun..kind of useless,the constent psi is at around 1000
@BrunoTombari25 күн бұрын
I did mention this that you will get around 1,000 to 1,100 PSI, 1800 is peak and usually needs a smaller nozzle. This washer is about higher flow rate(GPM). However if you put a nozzle with a smaller opening the pressure will increase, but the flow rate will decrease and do not use on a car. Hope this helps.
@phyllisharris2766Ай бұрын
Love this one!!!❤
@nrlarson79Ай бұрын
2 things I'VE noticed. 1. Best if used on a dark car for demo purposes. 2. The MJJC seems to cling better in the long run, looking at the windows. Agree that with the clear bottle, silicone weighted tube and the better foam, definitely goes to MJJC.
@joetucker9500Ай бұрын
Can you cook with bleach in tank.... after flushing all bleach out of the system, do you leave just water in your system and how many months...
@BrunoTombariАй бұрын
You should not use the water with bleach in the tank. Flush it out even if it takes several times refilling, flushing lines and emptying the fresh water tank. You should also sanitize your tank if it has been sitting in hot weather for a month or two not being used, as bacteria can build up.
@justtruth8310Ай бұрын
O I just saw 2X10 thanks !
@BrunoTombariАй бұрын
Thanks for watching. They are great ramps
@justtruth8310Ай бұрын
Hi Bruno I will be making these tomorrow. Is it 2X10? or 2/8? Thanks good job! Bill from south of Boston
@mikemauden5092Ай бұрын
Lippert products are garbage and their customer service is non existent.
@4435344142 ай бұрын
Thank you sir, this is exactly what I needed!
@BrunoTombari2 ай бұрын
Glad you enjoyed it. Thanks for watching
@kalijuri2 ай бұрын
thanks for such a detailed session. i am reticent to do mine for fear of doing something incorrect. i was also afraid of all the warnings on this product. I will give this a try. Thanks again.
@BrunoTombari2 ай бұрын
The thetford product is a great way. However if you are concerned check out this sanitization video using bleach instead. kzbin.info/www/bejne/rmSylZihnbGsh80
@ChristineDeGerolami-l7c2 ай бұрын
What if my front jacks will not extend out and my nose is down
@BrunoTombari2 ай бұрын
if there is no movement or noise coming from the jacks then you have a motor problem or bad wiring. Call lippert support and they will give you steps to diagnose
@osmosis4less12 ай бұрын
Thx appreciate your video.
@akreacts82962 ай бұрын
Great video bro! Put me in to perspective what I’d be dealing with & I already know what I’ll replace my water pump & supercharger pulley if it goes bad now ‼️ I don’t want the latest car, but this seems pretty reliable as long as you stay on top of the oil changes like any other car! My pops drives both a V8 truck & sedan! It’s my time to have my own at 26! Been finding them less than 15k from 84k-98k which isn’t bad to me.. I know what to replace or look into at that mileage as well!
@dougsabiston83092 ай бұрын
Following would love to know if it worked
@BrunoTombari2 ай бұрын
This weekend I should be releasing a update to the first video.
@BrunoTombari2 ай бұрын
New video update just released
@osmosis4less12 ай бұрын
Any updates on your shock treatment? Im thinking of starting with maintenance program. Thx
@BrunoTombari2 ай бұрын
This weekend I should be releasing an update
@osmosis4less12 ай бұрын
Many thx much appreciated.
@BrunoTombari2 ай бұрын
@@osmosis4less1 New video update just posted, Hope this helps.
@anibalbabilonia18672 ай бұрын
Man I want one!🥰👍
@Mac_Mission2 ай бұрын
Do you need water pump for this?
@Funkydood2 ай бұрын
Your ENDURANCE oil filter is of good-enough quality. Only that one.
@pixel8djake8672 ай бұрын
So is this only for HD trucks? I have an 18 silverado 1500. Trying to tap my running board lights to my DRLs. So can I tap into something under my dash? Or only the fuse box under the hood?
@BrunoTombari2 ай бұрын
I believe that GM has a kit available aftermarket that can be used with the 1500, the switches are a little different. Check with your local dealer
@jasoncassel54112 ай бұрын
Hey sir. Are you available for a chat on this car. I think I’m about to buy one but I’m reading horrible stories about the electrical. Thanks
@BrunoTombari2 ай бұрын
Sorry it is a very busy time right now. My understanding is the quality is better from 2010 Jaguars onward. Prior model years of various Jags did have some electrical issues.
@jdwht24552 ай бұрын
You just might want to read the Dexter Axle manual. That manual says to disassemble and inspect the bearings and brakes every 12,000 miles or every 12 months, whichever comes first. If you are only using their E-Z Lube system you are chancing blowing out that seal which, depending on the axle weight rating has a very tiny sealing surface. When that seal blows out, you ruin your brakes. Additionally, any old grease is only partially pushed out of the bearing, especially the large inner one and into the hub cavity where it will eventually make its way to that outer bearing. The ~1/16" grease exit hole is on the top of the spindle and there is little chance of good coverage of bearing surfaces by just using a hand grease gun even spinning the wheel. That hub, when empty will take approximately one tube of grease and my history over several large RVs is that Dexter (or Lippert) does NOT fully fill that hub cavity. Additionally, those bearings supplied by Dexter (and Lippert) are Chinese junk!. Our last 5er had two that were overheated blue and one that was chipped after just delivery from Indiana to Massachusetts then Upstate NY, or about 950 miles.
@BrunoTombari2 ай бұрын
You are correct, there is regular maintenance that is required. This video was to show how to use the easy lube axles. I never stated to do this only. Always follow the manufacturers recommended maintenance. Thanks for the comment.
@tester1ca2 ай бұрын
Greased my first Jayco 5th wheel yearly following the owners manual for 10 years. It had Dexter axels. Greased my second Jayco 5th wheel yearly for 3 years following the owners manual and found braking was diminishing after each grease job. It had Lippert axels. Grease seals had let go and grease got onto the shoes.
@BrunoTombari2 ай бұрын
It does happen that the grease seals let go. Very important not to rush the greasing or place too much pressure, this can cause seals to let go. Thanks for the information.
@2-old-Forthischet2 ай бұрын
One question I have is, how often do you grease the wheel bearings on your daily driver?
@BrunoTombari2 ай бұрын
Not sure what you are asking when you say Daily driver? Car bearings do not need to be greased. As for trailers follow the manufacturers maintenance recommendations
@michaelsliwinski80442 ай бұрын
Thanks Bruno. Helpful videos.
@Wheelgauge-bt7ox2 ай бұрын
One of the greatest cars ever made🇺🇸
@scottmotteler2 ай бұрын
Cut the top and ends off the box the new filter comes in, leave the two long sides bottom intact. Slide it under the filter, and then remove the filter, keeping the box in place to catch any debris, I had pen oak leaves on top of the filter and they fell into the fan, had to remove the fan to get them out. Was not fun
@gtileo3 ай бұрын
these pressure washers would be even better if they had wheels. a low hose input and output would make it so easy to pull them around with the hoses. thats what i like about my Spyder that i bought from CT but its starting to die off so i'm looking at this guy to replace it
@DonnaPitasi3 ай бұрын
PRICE
@tlast523 ай бұрын
How to remove xzilon coating from windshield brought new truck from dealer it was already on truck ,but they put on windshield and it’s streak and hazy Drives me nuts a like clean clear glass
@digitalonlinebusiness3 ай бұрын
Very cool Bruno!
@baltimoreslonewolfmook3 ай бұрын
helpful vid👌🏾
@jh.f303 ай бұрын
Ive had it over a year, best unit on the market for the price/ gpm.. once you get quick connects and a better wand/ foam cannon its a game changer
@JamesPearce-q6v3 ай бұрын
is the 2012 thor serrano 34m diesel pre-emission ??
@BrunoTombari3 ай бұрын
Yes, I believe 2014 was the first year for regen & 2016 for DPF
@JamesPearce-q6v3 ай бұрын
is the serrano diesel 2012 pre emissions ??
@elijahisrael72063 ай бұрын
Does it have solar option ?
@BrunoTombari3 ай бұрын
Yes, 200watt panel is an option, side port for portable solar is standard
@elmcitydetailing3 ай бұрын
Thanks for the video. Those screws are useless IMO. Most vehicles just have click in covers.
@andreataini7904 ай бұрын
You didn't understand the problem. Because of hot, the protective layer in the button melt and get sticky. If was just a little of grease noine needs to know that he needs a wipe. 😂
@turbodude514 ай бұрын
Always mention tool sizes
@BrunoTombari4 ай бұрын
Yes, it was mentioned that a TorxT15 is needed right around 2:50 timeframe of the video. Thanks for watching.