wowww fantastico super likeeeee 13 iscritto ciao da italy
@huzainisahmawi4 ай бұрын
its either pixel or color.. from what i can see the dark area around tree on 8k seems more bright. probably the processing more appear between that two instead just pixel.
@Unnaymed4 ай бұрын
Zoom more ... And what about 72 mpx photo? Seem a little misajustment lens if it's a little blur. On other tests we see the more details in 8k.
@TurboZHK4 ай бұрын
I tried to zoom in a lot, if I do that, I can see the difference, but it's not much. When 5.7K crop is too soft, 8K doesn't look much better at the same zoom. I guess better chip still can't match better sensor. Edit: how do know there is a misadjustment? I probably should contact Insta360 support if there is a problem. And, most of the reviews online, they compare 8K on X4 to 5.7K on X3 and find it much improved. But 5.7K on X4 is also much improved compare to 5.7K on X3. I think Roo's Review mentioned that in one of his stitching analysis video.
@ramusgaming25923 ай бұрын
@@TurboZHK x3 and x4 have the same sensor.
@TheVeggieBiker3 ай бұрын
@@ramusgaming2592 in that case they just upscale it to 8k with software, fak I wanted to upgrade my x3
@Ozpeter4 ай бұрын
Certainly in these shots there is not much difference visible. But the X4 uses a lot of processing and AI stuff on the original image from the sensor and it would be doing a lot of work to make the 5.7k look as good as possible. Have you tried comparing 8K and 5.7K with the various sharpness settings? Someone showed some comparisons of low, medium and high sharpness in 8K settings and the medium and high settings seemed to make a big difference.
@TurboZHK4 ай бұрын
I just did that an hour ago, medium sharpness is pretty good and balanced, but I would prefer to use Low and sharpen the images later, medium can still be too aggressive sometime. However, at medium sharpness 8K and 5.7K clips still look pretty close in image quality. Insta360 claims 78% more pixels in 8k compare to 5.7k, the end result is not 78% sharper, nowhere close.
@Ozpeter4 ай бұрын
@@TurboZHK Is the 5,7k footage actually 8k from the sensor reduced in processing, or does it only use 5.7k of the pixels from the sensor at the outset? Have you tried the 5.7+ setting also? And does it make a difference if the camera is moving instead of static?
@TurboZHK4 ай бұрын
@@Ozpeter I don't know how the camera works. I never tried the new 5.7k+ since it's purpose is to reduce file size and make editing less demanding. Since both factors don't bother me at all. I just ignored 5.7K+. I did a moving capture comparison prior to this. I couldn't tell the difference in that one too. I thought since I only have one camera, moving trigers too many variables. So I decided to do a still capture.
@Ozpeter4 ай бұрын
@@TurboZHK The kind of footage where I can see the biggest advantage in the 8k is 360 clips seen in a VR headset. But I think your experience shows that X4 users should do their own tests on the kind of uses relevant to them and decide on best settings accordingly.
@TurboZHK4 ай бұрын
@@Ozpeter someone else has mentioned to me that the true advantage of 8K shows in VR. But too bad I only have a PSVR2, which supports only gaming.
@giovanyrodriguez86934 ай бұрын
me gusta la base buena base
@keaixiaomeinv6 ай бұрын
That is one helluva clean setup, thank you for sharing!
@therixtergbr87247 ай бұрын
Hi.. Great video and I want to do the same. Do you have a rough idea what the weight of the ankle/wrist weights are? Are they 6kg? 2 x 3kg?
@TurboZHK7 ай бұрын
It depends on if you have drilled new holes on the base plate if the base plate is closer to you, you need less weight. Anyway, 2.5 kg x 2 should be enough to stabilize it.
@therixtergbr87247 ай бұрын
@@TurboZHK Thank you
@tumihalfiger10 ай бұрын
Super neat!
@serdarcizgen306 Жыл бұрын
hi what is the pipe diameter
@tylerarruda8625 Жыл бұрын
Links to parts?
@JohnH5528 Жыл бұрын
Excellent video - I will have the same set up as soon as my DD Pro arrives - I will begin 3D printing the parts now! Thank you.
@TurboZHK Жыл бұрын
FYI, I upgraded to the trophy, playseat challenge can handle Elite v2 pedals but with limitations, even the trophy has its problems. I guess aluminum profile rig is still the end game for sim racers. Challenge was perfectly fine for me until I no longer satisfied with brake force setting at only 15…
@collinbriel1652 Жыл бұрын
Just perfect!!!
@pyrozek Жыл бұрын
Hey do you have the 3d printed parts for the pedal / seat connector?
@TurboZHK Жыл бұрын
You can try to search for Fanatec V3 pedals adapter and play seat challenge reinforcement. I’ll ask the store where I got them see if they have shop on Alibaba or other platforms that ships internationally.
@noahschornoz62559 ай бұрын
I think that is what you’re searching. and it’s a totally free STL file
@user-xd9rq9bs5z2 жыл бұрын
单腿怎么保持平衡的?我照着视频练怎么也无法单腿站立
@TurboZHK2 жыл бұрын
支撑腿膝盖内扣
@wgz51383 жыл бұрын
重點教的超好,畫圓畫半天,原來要內壓膝蓋,怪不得怎麼樣都畫不出圓
@babyjulia97403 жыл бұрын
感謝分享 看過教得最仔細 又容易理解的影片 畫面漂亮有質感
@TurboZHK3 жыл бұрын
感谢鼓励!注意安全
@liang-fuyou99393 жыл бұрын
kzbin.info/www/bejne/nIrPn2OEmsaIqNE 成功學會獨輪車,來自一次次的失敗 Success in riding the Electric Wheel comes from repeated failures.
@davidyou73 жыл бұрын
kzbin.info/www/bejne/nIrPn2OEmsaIqNE 成功學會獨輪車,來自一次次的失敗 Success in riding the Electric Wheel comes from repeated failures.