i'm trying to tune up my first ocarina (3d printed with pla plastic). i don't get the algorithm, what hole should I start? very beautiful wooden ocarina btw
@fukaocarina3 ай бұрын
Wow❣️ It's a very delicate work 😊 Amazing!! ︎
@archijoe3 ай бұрын
Thank you so much for liking it.
@archijoe3 ай бұрын
There is also a video of Ocarina tuning the pitch, so please watch it. kzbin.info/www/bejne/eH-vk4GhmcqHaLcsi=6ihtVEBm3XAxlsqn
@piriajaeTV4 ай бұрын
모양도 투박하면서 소리도 편안하게 예쁩니다~ 멋지세요
@archijoe4 ай бұрын
관심있게 봐주셔서 감사합니다. 음정이 맞지 않아 조율하는 영상도 아래 링크에 있습니다. kzbin.info/www/bejne/eH-vk4GhmcqHaLcsi=M-xCFgSLQWlmWVP3
@martinwright15755 ай бұрын
It's so beautiful! I'd die to have an ocarina like that!
@franciscoalvarez-lz6pc7 ай бұрын
¿Y la traducción al castellano...? ¿Los latinos no existimos...? Como sea..., saludos desde Argentina.
@archijoe3 ай бұрын
thank you very much.
@unclemoriarty14369 ай бұрын
대단하세요 👏👏 오키리나가 참 예뻐요
@archijoe9 ай бұрын
예쁘게 봐주셔서 감사합니다. 새해 복 많이 받으세요~^^
@Randorf1009 ай бұрын
you're welcome you deserve great applause
@conradofreitas816610 ай бұрын
Ficou ótima!
@archijoe9 ай бұрын
Muito obrigado.
@Randorf10010 ай бұрын
I like how you really made a real ocarina it very beautifully and the melody sound grate.
@archijoe9 ай бұрын
Thank you so much for your kind compliment.
@미키트리11 ай бұрын
이런 영상 너무 좋아합니다. 자주 볼수 있었으면 좋겠네요. ^ ^
@archijoe11 ай бұрын
감사합니다!
@yigitegecevikkol Жыл бұрын
sound is beautifull
@archijoe Жыл бұрын
Thank you very much!
@ohnocoder Жыл бұрын
Nice work😊 Thank you for subtitles :D
@archijoe10 ай бұрын
thank you very much!
@aasifihiaasif9521 Жыл бұрын
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
@archijoe Жыл бұрын
thank you
@JohnColgan. Жыл бұрын
That got lovely tone, be proud of that build
@archijoe Жыл бұрын
Thank you very much!
@samuelroark-perez8634 Жыл бұрын
I'm sorry but could you please better explain the wind way and sound hole process? My small brain doesn't comprehend this process 😢
@archijoe Жыл бұрын
Hello? Thank you for watching my video. The wind road has to be at a good. When the amount of wind blowing through the mouth is 100%, 50% should go inside the ocarina and 50% should go outside. That's why it's hard to make an ocarina out of wood. So it is advantageous to make the body and mouth of the ocarina separately. The hole in the body of the ocarina then marks the position of the fingers that are most comfortable to hold in the playing position and then pierces them as small as 3mm. You can adjust it by adjusting the pitch and increasing the size of the hole in a very fine hole. The bigger the hole in the ocarina, the higher the pitch. If it's too high, fill in the hole and start over. I'll let you know how to do this through the video on the link below. I wish you success! kzbin.info/www/bejne/eH-vk4GhmcqHaLc
@MuhammadNadeem-ge5md Жыл бұрын
Call me plz
@rootmaze Жыл бұрын
오
@angelgarcia2113 Жыл бұрын
i love to see u making this ocarina. Pls do more ocarinas i love that, and u really do a good job
@archijoe Жыл бұрын
thank you very much!
@강수아-f4y Жыл бұрын
와~~~ 만세! 드뎌 성공하셨군요. 나무 오카리나 제작성공을 축하합니다. ㆍ 아가 오리처럼 예쁘기도 하네요. 저도 한 번 만들어 보고싶습니다.🙂 행복하세요~👍👏👏👏🎉💕
@archijoe Жыл бұрын
감사합니다! 축하해 주시니 기분이 좋네요. 행복한 날 보내시길요~^^
@tallmikbcroft6937 Жыл бұрын
Wonderful! I love your style. High quality for sure! Thank you for sharing your hard work.
@archijoe Жыл бұрын
Thank you for your compliments.
@tallmikbcroft6937 Жыл бұрын
So cool! Thank you for sharing.
@archijoe Жыл бұрын
Thank you for watching the video happily.
@mustaphamerras8758 Жыл бұрын
عمل جيد 👍 أحببته كثيرًا
@archijoe Жыл бұрын
شكرًا لك
@stevemcandrew639 Жыл бұрын
Thank you for a lovely video, the finished ocarina is really nice. My Grandson has asked me to make him one. I would think the size of the hole which you blow through is important (infilled with hardwood,) What size gap in the hole do you recommend for the best sound?
@archijoe Жыл бұрын
hello? Thank you for the compliment. Ocarina's hole spacing doesn't matter much. Instead, the size of the hole is very important. After drilling a small hole (about 3mm in diameter) at a location where the grandson is comfortable holding it with his finger, you need to tune it by gradually increasing the size of the hole. This is because the pitch is low when the hole is small, and the pitch increases when the hole is gradually increased. I hope you make a great ocarina!
@archijoe Жыл бұрын
If you watch the video of re-tuning after failing to adjust the pitch, it will be helpful. kzbin.info/www/bejne/eH-vk4GhmcqHaLc
@Valiam.84 Жыл бұрын
Very beautiful!
@archijoe Жыл бұрын
Thank you very much!
@johnhoye6584 Жыл бұрын
Those light wood ring looks good in the dark background. What a happy accident!
@archijoe Жыл бұрын
thank you very much :-)
@caroljordan2886 Жыл бұрын
An inspiring video. Thank you for sharing
@archijoe Жыл бұрын
Thank you for thinking so.
@agoogleuser3787 Жыл бұрын
You should be able to tune that instrument on the initial build, as you drill the original note holes in. Start small and pitch tune them . Build another one if you are not happy. Even small irregularities on the inside will adversely affect your final outcome.
@archijoe Жыл бұрын
Thank you for your kind advice. Someday, when I make it again, I will make fine adjustments and produce good results.
@agoogleuser3787 Жыл бұрын
Love the video. One of the better wood ones on here imho. What key is this? And do you have an email?
@archijoe Жыл бұрын
Thank you very much! And I don't know the key exactly. Maybe C. My email is... [email protected]
@Adam-G777 Жыл бұрын
Beautifully done sir. 🙏
@archijoe Жыл бұрын
Thank you kindly
@bearshield7138 Жыл бұрын
nice job
@VinlandAlchemist Жыл бұрын
매우 감사합니다! 🙂 This was excellent! 😊
@archijoe Жыл бұрын
Thank you very much for the compliment.
@AnkaNunaFromEagleSpirit Жыл бұрын
Felicitaciones, es muy buena, cada vez saldran mejores
@archijoe Жыл бұрын
Muchísimas gracias.
@edgarpy1088 Жыл бұрын
Gran iniciativa y no decaer, congratulaciones, gracias por compartir, con esa actitud cada vez saldra mejor.
@archijoe Жыл бұрын
Gracias por sus amables palabras y elogios.
@eduaradoadrianherreralagua9642 жыл бұрын
Excelente.
@archijoe2 жыл бұрын
thank you very much!
@beans12402 жыл бұрын
That is a beautiful ocarina, and I know I'm a bit late. I plan on making one out of a branch from our tree.
@archijoe2 жыл бұрын
Thank you. I wish you success in making wooden ocarina. It is important to use dry wood.
@beans12402 жыл бұрын
It was a dead but not rotten branch, and thank you.
@mirraje2452 жыл бұрын
Fiz duas de porungo. Mas não consegui afinar.
@archijoe2 жыл бұрын
O som da ocarina depende do tamanho do buraco. Quanto maior for o buraco, maior será o nível de ponta, e menor será o nível de ponta.
@archijoe2 жыл бұрын
kzbin.info/www/bejne/eH-vk4GhmcqHaLc
@ssverchok2 жыл бұрын
Ничего не понятно, но очень интересно
@archijoe2 жыл бұрын
Спасибо. Очевидно, что я сделал окарину из дерева.
@doaaahmedable2 жыл бұрын
Amazing
@archijoe2 жыл бұрын
Thank you very much!
@chrisstearns102 жыл бұрын
Excellent 👍 👍 👍 👍 👍
@archijoe2 жыл бұрын
Thank you very much!
@langstonstevens65512 жыл бұрын
where did you get you get your gouge chisel?
@archijoe2 жыл бұрын
I bought it at a hardware store.
@edgarmendoza30452 жыл бұрын
Is beautifull You have for 12 hole Where found the sizes for make one?
@archijoe2 жыл бұрын
I don't know the exact way. After drilling the hole small, I made a sound and adjusted it little by little.
@archijoe2 жыл бұрын
kzbin.info/www/bejne/eH-vk4GhmcqHaLc
@국제-k4j2 жыл бұрын
마지막에 오일 바르실때 무슨 오일을 바르신건가요?
@archijoe2 жыл бұрын
독일제 CLOU 하드왁스 오일입니다
@alun70063 жыл бұрын
Wonderful!
@archijoe3 жыл бұрын
Thank you very much!
@sulaymanadham57603 жыл бұрын
I like the process, the neat editing, the presentation and the soothing voice. Here is a sub!